Gallium nitride (GaN) is a compound semiconductor that has tremendous potential to facilitate economic growth in a semiconductor industry that is silicon-based and currently faced with diminishing returns of performance versus cost of investment. At a material level, its high electric field strength and electron mobility have already shown tremendous potential for high frequency communications and photonic applications. Advances in growth on commercially viable large area substrates are now at the point where power conversion applications of GaN are at the cusp of commercialisation. The future for building on the work described here in ways driven by specific challenges emerging from entirely new markets and applications is very exciting. This collection of GaN technology developments is therefore not itself a road map but a valuable collection of global state-of-the-art GaN research that will inform the next phase of the technology as market driven requirements evolve. First generation production devices are igniting large new markets and applications that can only be achieved using the advantages of higher speed, low specific resistivity and low saturation switching transistors. Major investments are being made by industrial companies in a wide variety of markets exploring the use of the technology in new circuit topologies, packaging solutions and system architectures that are required to achieve and optimise the system advantages offered by GaN transistors. It is this momentum that will drive priorities for the next stages of device research gathered here.

We present an electro-optical method for the extrapolation of the nonradiative and Auger recombination coefficients in InGaN/GaN Light-emitting diodes !LEDs". The method has the advantage of permitting the extrapolation of the recombination parameters of packaged devices, contrary to conventional techniques based on the analysis of quasibulk structures. For the analyzed devices, the average values of the nonradiative and Auger recombination coefficients have been determined to be equal to 2.3!107 s−1 and 1.0!10−30 cm6 s−1, respectively. These results are consistent with previous reports based on the analysis of quasibulk structures and on theoretical simulations. The method described in this paper constitutes an efficient tool for the analysis of the recombination dynamics in GaN-based LEDs. The results obtained within this work support the hypothesis on the importance of Auger recombination in determining the so-called efficiency droop in LED structures

This paper presents an extensive analysis of the operating principles, theoretical background, advantages and limitations of laser-based lighting systems. In the first part of the paper we discuss the main advantages and issues of laser-based lighting, and present a comparison with conventional LED-lighting technology. In the second part of the paper, we present original experimental data on the stability and reliability of phosphor layers for laser lighting, based on high light-intensity and high-temperature degradation tests. In the third part of the paper (for the first time) we present a detailed comparison between three different solutions for laser lighting, based on (i) transmissive phosphor layers; (ii) a reflective/angled phosphor layer; and (iii) a parabolic reflector, by discussing the advantages and drawbacks of each approach. The results presented within this paper can be used as a guideline for the development of advanced lighting systems based on laser diodes.

Herein, the main factors and mechanisms that limit the reliability of gallium nitride (GaN)-based light-emitting diodes (LEDs) are reviewed. An overview of the defects characterization techniques most relevant for wide-bandgap diodes is provided first. Then, by introducing a catalogue of traps and deep levels in GaN and computer-aided simulations, it is shown which types of defects are more detrimental for the radiative efficiency of the devices. Gradual degradation mechanisms are analyzed in terms of their specific driving force: a separate analysis of recombination-enhanced processes, driven by nonradiative recombination and/or temperature-assisted processes, such as defects or impurity diffusion, is presented. The most common lifetime estimation methods and standards adopted for solid-state luminaires are also reported on. Finally, the paper concludes by examining which are the typical degradation and failure mechanisms exhibited by LEDs submitted to electrical overstress.