No abstract

the dependencies of the enhanced thermomechanical properties of zirconium carbide (Zrc x) with sample purity and stoichiometry are still not understood due to discrepancies in the literature. Multiple researchers have recently reported a linear relation between the carbon to zirconium atomic ratio (c/Zr) and the lattice parameter, in contrast with a more established relationship that suggests that the lattice parameter value attains a maximum value at a C/Zr ~ 0.83. In this study, the relationship between C/Zr atomic ratio and the lattice parameter is critically assessed: it is found that recent studies reporting the thermophysical properties of Zrc x have unintentionally produced and characterised samples containing zirconium oxycarbide. to avoid such erroneous characterization of Zrc x thermophysical properties in the future, we propose a method for the accurate measurement of the stoichiometry of ZrC x using three independent experimental techniques, namely: elemental analysis, thermogravimetric analysis and nuclear magnetic resonance spectroscopy. Although a large scatter in the results (Δc/Zr = 0.07) from these different techniques was found when used independently, when combining the techniques together consistent values of x in Zrc x were obtained. Zirconium carbide (ZrC) is a much-promising material, it has received increased interest recently as an alternative material to silicon carbide (SiC) in nuclear fuel applications 1,2 , in next-generation nuclear fusion reactors 3 , and also as an ultra-high-temperature ceramic to be used in ceramic-metal composite heat exchangers in concentrated solar power (CSP) plants 4,5. ZrC (here denoted as ZrC x) is typically non-stoichiometric as it can contain up to 50% of unoccupied carbon sites 6,7 , it has been found that deviations in the stoichiometry of ZrC x can severely affect its thermal and mechanical properties 8,9. Given its potential in high-temperature applications, it is extremely important to define a method that robustly determines its stoichiometry and purity. The purity of ZrC x should always be assessed as the presence of contaminants such as nitrogen or oxygen is detrimental for its performance. For example, if ZrC x is to be used as a nuclear fuel coating in a nuclear reactor, any nitrogen contamination should be avoided due to the production of radioactive 14 C from nitrogen 14 N inside the reactor 10. There are two common methods for defining the stoichiometry of ZrC x. The first one is to evaluate the C/Zr atomic ratio from the lattice parameter measured by X-ray diffraction (XRD) using the correlation published in Jackson & Lee 6. The second one is to quantify through the inert-gas fusion technique the carbon content in ZrC x and calculate the C/Zr atomic ratio assuming that the sample is free from impurities. Both techniques, however, have limitations and when used in standalone approaches can lead to erroneous stoichiometry estimations, as we will proceed to demonstrate later in this paper. The need for an established robust method to measure ...

High global warming potential (GWP) refrigerant leakage is the second-highest source of carbon emissions across UK supermarket retailers and a major concern for commercial organizations. Recent stringent UN and EU regulations promoting lower GWP refrigerants have been ratified to tackle the high carbon footprint of current refrigerants. This paper introduces a data-driven modelling framework for optimal investment strategies supporting the food retail industry to transition from hydrofluorocarbon (HFC) refrigeration systems to lower GWP systems by 2030, in line with EU legislation. Representative data from a UK food retailer is applied in a mixed integer linear model, making simultaneous investment decisions across the property estate. The model considers refrigeration-system age, capacity, refrigerant type, leakage and past-performance relative to peer systems in the rest of the estate. This study proposes two possible actions for high GWP HFC refrigeration systems: a) complying with legislation by retrofitting with an HFO blend (e.g. R449-A) or b) installing a new natural refrigerant system (e.g. R744). Findings indicate that a standard (i.e. business-as-usual) investment level of £6 m/yr drives a retrofitting strategy enabling significant reduction in annual carbon emissions of 71% by the end of 2030 (against the 2018 baseline), along with meeting regulatory compliance. The strategy is also highly effective at reducing emissions in the short term as total emissions during the 12-year programme are 59% lower than would have been experienced if the HFC emissions continued unabated. However, this spending level leaves the business at significant risk of refrigeration system failures as necessary investments in new systems are delayed resulting in an ageing, poorly performing estate. The model is further tested under different budget and policy scenarios and the financial, environmental, and business-risk implications are analysed. For example, under a more aggressive investment approach of £50 m/yr carbon reductions are at 93% by the end of 2030, whilst also ensuring compliance with the legislative cut-off four years early in 2026 and substantially enhancing the reliability of the refrigeration systems in the portfolio. Alternatively, when emissions are minimised instead of cost with an annual budget of £50m a decarbonisation of 99% is achieved by 2030. Overall, the study highlights the trade-offs between capital investment and system resilience requiring a careful balance of priorities and the need to have up to date information so decision-makers can reliably drive a successful strategy towards more sustainable operation of refrigeration systems.

No abstract

In this study, we investigate the hydrodynamics of polymer-induced drag reduction in horizontal turbulent pipe flows. We provide spatiotemporally resolved information of velocity and its gradients obtained with particle image velocimetry (PIV) measurements in solutions of water with dissolved polyethylene oxide (PEO) of three different molecular weights, at various dilute concentrations and with flow Reynolds numbers from 35, 000 to 210, 000. We find that the local magnitudes of important turbulent flow variables correlate with the measured levels of drag reduction irrespective of the flow Reynolds number, polymer weight and concentration. Contour maps illustrate the spatial characteristics of this correlation. A relationship between the drag reduction and the turbulent flow variables is found. The effects of the polymer molecular weight, its concentration and the Reynolds number on the flow are further examined through joint probability distributions of the fluctuations of the streamwise and spanwise velocity components.