Either as salts or room temperature ionic liquids, fluorinated anion-based electrolytes have been a common choice for ionic electroactive polymer actuators, both linear and bending. In the present work, propylene carbonate solutions of four electrolytes of the three hugely popular anions—triflouromethanesulfonate, bis(trifluoromethane)sulfonimide, and hexafluorophosphate were compared and evaluated in polypyrrole linear actuators. The actuation direction, the characteristics—performance relations influence the behavior of the actuators. Isotonic Electro-chemo-mechanical deformation (ECMD) measurements were performed to study the response of the PPy/DBS samples. The highest strain for pristine PPy/DBS linear actuators was found in range of 21% for LiTFSI, while TBAPF6 had the least cation involvement, suggesting the potential for application in durable and controllable actuators. Interesting cation effects on the actuation of the same anions (CF3SO3−) were also observed.
In films of conducting polymers, the electrochemical reaction(s) drive the simultaneous variation of different material properties (reaction multifunctionality). Here, we present a parallel study of actuation-sensing-energy storage triple functionality of polypyrrole (PPy) blends with dodecylbenzenesulfonate (DBS-), PPy/DBS, without and with inclusion of polyethyleneoxide, PPy-PEO/DBS. The characterization of the response of both materials in aqueous solutions of four different salts indicated that all of the actuating, sensing and charge storage responses were, independent of the electrolyte, present for both materials, but stronger for the PPy-PEO/DBS films: 1.4× higher strains, 1.3× higher specific charge densities, 2.5× higher specific capacitances and increased ion-sensitivity towards the studied counterions. For both materials, the reaction energy, the material potential and the strain variations adapt to and sense the electrical and chemical (exchanged cation) conditions. The driving and the response of actuation, sensing and charge can be controlled/read, simultaneously, via just two connecting wires. Only the cooperative actuation of chemical macromolecular motors from functional cells has such chemical multifunctionality.
Modern personal protective armor has been generally based on the Kevlar fabrics, with the main goal to offer defense against bullets. In addition to the high cost and poor processability, Kevlar has the disadvantage of limited stab-proofing capability. On the other hand, a large number of crimes involving deadly injures represent knife attacks. Our goal in this work was to investigate composites based on traditional commercially available fabrics of linen and silk, using different adhesives-polymers for forming laminates. The silk composites also contained different amounts of in-woven polyester. Three different water-based adhesives of polyurethane, urea formaldehyde and polyvinyl alcohol were considered. It was found, that besides the strength of the fabrics themselves, the adhesives polymers played a crucial role in the obtained performance of the laminates. The laminates were characterized in their mechanical properties, as well as with scanning electron microscopy and FTIR spectroscopy.
While increasing power output is the most straight-forward solution for faster and stronger motion in technology, sports, or elsewhere, efficiency is what separates the best from the rest. In nature, where the possibilities of power increase are limited, efficiency of motion is particularly important; the same principle can be applied to the emerging biomimetic and bio-interacting technologies. In this work, by applying hints from nature, we consider possible approaches of increasing the efficiency of motion through liquid medium of bilayer ionic electroactive polymer actuations, focusing on the reduction of friction by means of surface tension and hydrophobicity. Conducting polyethylene terephthalate (PET) bilayers were chosen as the model actuator system. The actuation medium consisted of aqueous solutions containing tetramethylammonium chloride and sodium dodecylbenzenesulfonate in different ratios. The roles of ion concentrations and the surface tension are discussed. Hydrophobicity of the PET support layer was further tuned by adding a spin-coated silicone layer to it. As expected, both approaches increased the displacement—the best results having been obtained by combining both, nearly doubling the bending displacement. The simple approaches for greatly increasing actuation motion efficiency can be used in any actuator system operating in a liquid medium.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.