This paper presents an experimental study for the structural performance of reinforced concrete (RC) exterior beam–column joints rehabilitated using carbon-fiber-reinforced polymer (CFRP). The present experimental program consists of testing 10 half-scale specimens divided into three groups covering three possible defects in addition to an adequately detailed control specimen. The considered defects include the absence of the transverse reinforcement within the joint core, insufficient bond length for the beam main reinforcement and inadequate spliced implanted column on the joint. Three different strengthening schemes were used to rehabilitate the defected beam–column joints including externally bonded CFRP strips and sheets in addition to near surface mounted (NSM) CFRP strips. The failure criteria including ultimate capacity, mode of failure, initial stiffness, ductility and the developed ultimate strain in the reinforcing steel and CFRP were considered and compared for each group for the control and the CFRP-strengthened specimens. The test results showed that the proposed CFRP strengthening configurations represented the best choice for strengthening the first two defects from the viewpoint of the studied failure criteria. On the other hand, the results of the third group showed that strengthening the joint using NSM strip technique enabled the specimen to outperform the structural performance of the control specimen while strengthening the joints using externally bonded CFRP strips and sheets failed to restore the strengthened joints capacity.

No abstract

This paper aimed to develop and evaluate an efficient strengthening method for reinforced concrete beams, based on engineered cementitious composites (ECC) to be applied as a transition layer prior to the application of the carbon fibrereinforced polymer (CFRP) strengthening sheet. The role of the proposed transition layer is to control the cracking of concrete and detain or even avoid premature de-bonding of the strengthening CFRP sheets. As the ability of the transition layer to exhibit a strain hardening behaviour is mainly dependent on the used fibre volumetric ratio, three ECC mixes with three different polypropylene fibre volumetric ratios were used (fibre volumetric ratio of 0.5%, 1% and 1.5%). The experimental results showed that while the used CFRP strengthening sheet can increase the ultimate load by about 28.8% compared with the control un-strengthened beam, this increase can reach about 48.5% by applying the same CFRP sheet to the proposed ECC transition layer that contains a fibre volumetric ratio of 1.5%. Moreover, this layer integrated with the mention ratio of the fibre content enabled the CFRP sheet to be in a complete contact with the strengthened beam without any de-bonding up the rupture of the CFRP sheet at failure.

No abstract

No abstract

No abstract

No abstract

No abstract