Tetrahexahedral Pd nanocrystals (THH Pd NCs) with {730} high-index facets were directly produced on a glassy carbon substrate in a dilute PdCl(2) solution by a newly developed programmed electrodeposition method. The THH Pd NCs, thanks to their high density of surface atomic steps, exhibit 4-6 times higher catalytic activity than commercial Pd black catalyst toward ethanol electrooxidation in alkaline solutions. This straightforward method provides a promising route to facile preparation of high-index-faceted metal nanocatalysts with high catalytic activity.

Aqueous rechargeable zinc‐metal‐based batteries are an attractive alternative to lithium‐ion batteries for grid‐scale energy‐storage systems because of their high specific capacity, low cost, eco‐friendliness, and nonflammability. However, uncontrollable zinc dendrite growth limits the cycle life by piercing the separator, resulting in low zinc utilization in both alkaline and mild/neutral electrolytes. Herein, a polyacrylonitrile coating layer on a zinc anode produced by a simple drop coating approach to address the dendrite issue is reported. The coating layer not only improves the hydrophilicity of the zinc anode but also regulates zinc‐ion transport, consequently facilitating the uniform deposition of zinc ions to avoid dendrite formation. A symmetrical cell with the polymer‐coating‐layer‐modified Zn anode displays dendrite‐free plating/stripping with a long cycle lifespan (>1100 h), much better than that of the bare Zn anode. The modified zinc anode coupled with a Mn‐doped V2O5 cathode forms a stable rechargeable full battery. This method is a facile and feasible way to solve the zinc dendrite problem for rechargeable aqueous zinc‐metal batteries, providing a solid basis for application of aqueous rechargeable Zn batteries.

The past decade has witnessed substantial advances in the synthesis of various electrode materials with threedimensional (3D) ordered macroporous or mesoporous structures (the so-called "inverse opals") for applications in electrochemical energy storage devices. This review summarizes recent advancements in 3D ordered porous (3DOP) electrode materials and their unusual electrochemical properties endowed by their intrinsic and geometric structures. The 3DOP electrode materials discussed here mainly include carbon materials, transition metal oxides (such as TiO 2 , SnO 2 , Co 3 O 4 , NiO, Fe 2 O 3 , V 2 O 5 , Cu 2 O, MnO 2 , and GeO 2), transition metal dichalcogenides (such as MoS 2 and WS 2), elementary substances (such as Si, Ge, and Au), intercalation compounds (such as Li 4 Ti 5 O 12 , LiCoO 2 , LiMn 2 O 4 , LiFePO 4), and conductive polymers (polypyrrole and polyaniline). Representative applications of these materials in Li ion batteries, aqueous rechargeable lithium batteries, Li-S batteries, Li-O 2 batteries, and supercapacitors are presented. Particular focus is placed on how ordered porous structures influence the electrochemical performance of electrode materials. Additionally, we discuss research opportunities as well as the current challenges to facilitate further contributions to this emerging research frontier.

Noble metal nanocrystals (NCs) enclosed with high-index facets hold a high catalytic activity thanks to the high density of low-coordinated step atoms that they exposed on their surface. Shape-control synthesis of the metal NCs with high-index facets presents a big challenge owing to the high surface energy of the NCs, and the shape control for metal Rh is even more difficult because of its extraordinarily high surface energy in comparison with Pt, Pd, and Au. The successful synthesis is presented of tetrahexahedral Rh NCs (THH Rh NCs) enclosed by {830} high-index facets through the dynamic oxygen adsorption/desorption mediated by square-wave potential. The results demonstrate that the THH Rh NCs exhibit greatly enhanced catalytic activity over commercial Rh black catalyst for the electrooxidation of ethanol and CO.

The shape-controlled synthesis of multicomponent metal nanocrystals (NCs) bounded by high-index facets (HIFs) is of significant importance in the design and synthesis of high-activity catalysts. We report herein the preparation of Pt-Ni alloy NCs by tuning their shape from concave-nanocubic (CNC) to nanocubic and hexoctahedral (HOH). Owing to the synergy of the HIFs and the electronic effect of the Pt-Ni alloy, the as-prepared CNC and HOH Pt-Ni alloy NCs exhibited excellent catalytic properties for the electrooxidation of methanol and formic acid, as well as for the oxygen reduction reaction (ORR).