Materials exhibiting pronounced metal−insulator transitions such as VO 2 have acquired great importance as potential computing vectors and electromagnetic cloaking elements given the large accompanying reversible modulation of properties such as electrical conductance and optical transmittance. As a first-order phase transition, considerable phase coexistence and hysteresis is typically observed between the heating insulator → metal and cooling metal → insulator transformations of VO 2 . Here, we illustrate that substitutional incorporation of tungsten greatly modifies the hysteresis of VO 2 , both increasing the hysteresis as well as introducing a distinctive kinetic asymmetry wherein the heating symmetryraising transition is observed to happen much faster as compared to the cooling symmetry-lowering transition, which shows a pronounced rate dependence of the transition temperature. This observed kinetic asymmetry upon tungsten doping is attributed to the introduction of phase boundaries resulting from stabilization of nanoscopic M 2 domains at the interface of the monoclinic M 1 and tetragonal phases. In contrast, the reverse cooling transition is mediated by point defects, giving rise to a pronounced size dependence of the hysteresis. Mechanistic elucidation of the influence of dopant incorporation on hysteresis provides a means to rationally modulate the hysteretic width and kinetic asymmetry, suggesting a remarkable programmable means of altering hysteretic widths of an electronic phase transition.

Buildings consume an inordinate amount of energy, accounting for 30-40% of worldwide energy consumption. A major portion of solar radiation is transmitted directly to building interiors through windows, skylights, and glazed doors where the resulting solar heat gain necessitates increased use of air conditioning. Current technologies aimed at addressing this problem suffer from major drawbacks, including a reduction in the transmission of visible light, thereby resulting in increased use of artificial lighting. Since currently used coatings are temperature-invariant in terms of their solar heat gain modulation, they are unable to offset cold-weather heating costs that would otherwise have resulted from solar heat gain. There is considerable interest in the development of plastic fenestration elements that can dynamically modulate solar heat gain based on the external climate and are retrofittable onto existing structures. The metal-insulator transition of VO is accompanied by a pronounced modulation of near-infrared transmittance as a function of temperature and can potentially be harnessed for this purpose. Here, we demonstrate that a nanocomposite thin film embedded with well dispersed sub-100-nm diameter VO nanocrystals exhibits a combination of high visible light transmittance, effective near-infrared suppression, and onset of NIR modulation at wavelengths <800 nm. In our approach, hydrothermally grown VO nanocrystals with <100 nm diameters are dispersed within a methacrylic acid/ethyl acrylate copolymer after either (i) grafting of silanes to constitute an amorphous SiO shell or (ii) surface functionalization with perfluorinated silanes and the use of a perfluorooctanesulfonate surfactant. Homogeneous and high optical quality thin films are cast from aqueous dispersions of the pH-sensitive nanocomposites onto glass. An entirely aqueous-phase process for preparation of nanocrystals and their effective dispersion within polymeric nanocomposites allows for realization of scalable and viable plastic fenestration elements.

Unconventional deposits such as extra heavy oil and bitumen represent a steadily increasing proportion of extracted fuels. The rheological properties of viscous crude oil represents a formidable impediment to their extraction, transportation, and processing and have necessitated considerable retooling and changes to process design. In this work, we demonstrate that highly textured inorganic substrates generated by depositing ZnO nanotetrapods onto periodically ordered stainless steel mesh substrates exhibit viscous oil contact angles exceeding 150°as well as enable the facile gliding of viscous oil. Such functionality is derived as a result of multiscale texturation and porosity achieved within these substrates, which are characterized by trapping of plastronic air pockets at the solid/liquid interface. Further reduction of the surface energy has been achieved by constituting a helical highly ordered self-assembled monolayer of a perfluorinated phosphonic acid on the ZnO surfaces. Such structures are strongly ejected upon immersion in water with water contact angles in excess of 160°. The functionalized substrates demonstrate remarkable superoleophobic behavior toward viscous crude oil with contact angles reaching 156°and are furthermore stable to temperatures of 290 °C. The remarkable results evidenced here hold promise for deployment of these constructs in the handling of viscous oil in order to reduce losses associated with transportation from railroad cars, pipelines, and other oil-handling equipment.

Increasing intercalation of Li-ions brings about distortive structural transformations in several canonical intercalation hosts. Such phase transformations require the energy dissipative creation and motion of dislocations at the interface between the parent lattice and the nucleated Li-rich phase. Phase inhomogeneities within particles and across electrodes give rise to pronounced stress gradients, which can result in capacity fading. How such transformations alter Li-ion diffusivities remains much less explored. In this article, we use layered VO as an intercalation host and examine the structural origins of the evolution of Li-ion diffusivities with phase progression upon electrochemical lithiation. Galvanostatic intermittent titration measurements show a greater than 4 orders of magnitude alteration of Li-ion diffusivity in VO as a function of the extent of lithiation. Pronounced dips in Li-ion diffusivities are correlated with the presence of phase mixtures as determined by Raman spectroscopy and X-ray diffraction, whereas monophasic regimes correspond to the highest Li-ion diffusivity values measured within this range. First-principles density functional theory calculations confirm that the variations in Li-ion diffusivity do not stem from intrinsic differences in diffusion pathways across the different lithiated VO phases, which despite differences in the local coordination environments of Li-ions show comparable migration barriers. Scanning transmission X-ray microscopy measurements indicate the stabilization of distinct domains reflecting the phase coexistence of multiple lithiated phases within individual actively intercalating particles. The results thus provide fundamental insight into the considerable ion transport penalties incurred as a result of phase boundaries formed within actively intercalating particles. The combination of electrochemical studies with ensemble structural characterization and single-particle X-ray imaging of phase boundaries demonstrates the profound impact of interfacial phenomena on macroscopic electrode properties.

Fenestration elements that enable spectrally selective dynamic modulation of the near-infrared region of the electromagnetic spectrum are of great interest as a means of decreasing the energy consumption of buildings by adjusting solar heat gain in response to external temperature. The binary vanadium oxide VO 2 exhibits a near-room-temperature insulator–metal electronic transition accompanied by a dramatic modulation of the near-infrared transmittance. The low-temperature insulating phase is infrared transparent but blocks infrared transmission upon metallization. There is considerable interest in harnessing the thermochromic modulation afforded by VO 2 in nanocomposite thin films. However, to prepare a viable thermochromic film, the visible-light transmittance must be maintained as high as possible while maximizing thermochromic modulation in the near-infrared region of the electromagnetic spectrum, which necessitates the development of high-crystalline-quality VO 2 nanocrystals of the optimal particle size embedded within the appropriate host matrix and refractive index matched to the host medium. Here, we demonstrate the preparation of acrylate-based nanocomposite thin films with varying sizes of embedded VO 2 nanoparticles. The observed strong size dependence of visible-light transmittance and near-infrared modulation is explicable on the basis of optical simulations. In this article, we elucidate multiple scattering and absorption mechanisms, including Mie scattering, temperature-/phase-variant refractive-index mismatch between VO 2 nanocrystals and the encapsulating matrix, and the appearance of a surface plasmon resonance using temperature-variant absorptance and diffuse transmittance spectroscopy measurements performed as a function of particle loading for the different sizes of VO 2 nanocrystals. Nanocrystals with dimensions of 44 ± 30 nm show up to >32% near-infrared energy modulation across the near-infrared region of the electromagnetic spectrum while maintaining high visible-light transmission. The results presented here, providing mechanistic elucidation of the size dependence of the different scattering mechanisms, underscore the importance of nanocrystallite dimensions, refractive-index matching, and individualized dispersion of particles within the host matrix for the preparation of viable thermochromic thin films mitigating Mie scattering and differential refractive-index scattering.