The control of emission from localized light sources is an objective of outstanding relevance in nanophotonics. In a recent past, a large number of metallic nanostructures has been proposed to this end, wherein plasmonic modes are exploited as energy carriers on a subwavelength scale. As an interesting alternative, we present here the use of surface modes on patterned dielectric multilayers to deliver electromagnetic power from free-space to localized volumes and vice versa. Thanks to this low-loss energy transfer, proper periodic ring structures are shown to provide a subwavelength focusing of an external radiation onto the multilayer surface. By reciprocity, the radiated power from emitters within the ring center is shown to be efficiently beamed in the free-space, with a well-controlled angular divergence. This mechanism overcomes some important limitations involved in the all-plasmonic approach, while opening new opportunities for hybrid devices in photon management applications such as optical sensing and lighting.

The measurements of dc Josephson and quasiparticle current-voltage characteristics of four-layered Nb/Al–AlOx–Nb devices with a fixed Nb thickness of 270 nm and Al thicknesses ranging from 40 to 120 nm are reported and analyzed in the framework of a microscopic model developed to determine stationary properties of dirty limit double-barrier junctions. It is shown that the temperature dependence of the supercurrent as well as the values of characteristic voltages are well reproduced by the model calculations with only one fitting parameter. We have revealed a hysteretic-to-nonhysteretic transition in the current-voltage characteristics of our junctions at temperatures near 4.2 K and argue that this effect is caused by two factors: high-transparency insulating barrier with a broad distribution of the transmission coefficient and the temperature as a tuning parameter, which decreases the McCumber–Stewart parameter from values above unity at low temperatures to less than one above 4.2 K. Finally, we show how and why the temperature stability of the proposed Josephson devices can be significantly improved by choosing an appropriate Al thickness.

Superconducting and normal state properties of Niobium nanofilms have been systematically investigated as a function of film thickness, on different substrates. The width of the superconducting-to-normal transition for all films is remarkably narrow, confirming their high quality. The superconducting critical current density exhibits a pronounced maximum for thickness around 25 nm, marking the 3D-to-2D crossover. The magnetic penetration depth shows a sizeable enhancement for the thinnest films. Additional amplification effects of the superconducting properties have been obtained with sapphire substrates or squeezing the lateral size of the nanofilms. For thickness close to 20 nm we measured a doubled perpendicular critical magnetic field compared to its large thickness value, indicating shortening of the correlation length and the formation of small Cooper pairs. Our data analysis indicates an exciting interplay between quantum-size and proximity effects together with strong-coupling effects and the importance of disorder in the thinnest films, placing these nanofilms close to the BCS-BEC crossover regime.

The lateral confinement of Bloch surface waves on a patterned multilayer is investigated by means of leakage radiation microscopy (LRM). Arrays of nanometric polymeric waveguides are fabricated on a proper silicon-nitride/silicon-oxide multilayer grown on a standard glass coverslip. By exploiting the functional properties of the polymer, fluorescent proteins are grafted onto the waveguides. A fluorescence LRM analysis of both the direct and the Fourier image plane reveals that a substantial amount of emitted radiation couples into a guided mode and then propagates into the nanometric waveguide. The observations of the mode are supported by numerical simulations. (C) 2012 American Institute of Physics. [doi:10.1063/1.3684272

We describe the controlled use of a 17 keV X-ray synchrotron nanobeam to progressively change the oxygen doping level in Bi-2212 superconducting whisker-like single crystals. Our data combine structural and electrical information collected on the same crystals, showing a maximum change in the critical temperature Tc of 1.3 K and a maximum elongation of ∼1 Å in the c-axis length, compared to the as-grown conditions. Simulations of our experimental conditions by means of a finite element model exclude local heating induced by the X-ray nanobeam as a possible cause for the change in the doping level and suggest an important role of secondary electrons. These findings support the possible use of hard X-rays as a novel direct-writing, photoresist-free lithographic process for the fabrication of superconducting devices, with potential nanometric resolution and 3D capability.