Superelastic conducting fibers with improved properties and functionalities are needed for diverse applications. Here we report the fabrication of highly stretchable (up to 1320%) sheath-core conducting fibers created by wrapping carbon nanotube sheets oriented in the fiber direction on stretched rubber fiber cores. The resulting structure exhibited distinct short- and long-period sheath buckling that occurred reversibly out of phase in the axial and belt directions, enabling a resistance change of less than 5% for a 1000% stretch. By including other rubber and carbon nanotube sheath layers, we demonstrated strain sensors generating an 860% capacitance change and electrically powered torsional muscles operating reversibly by a coupled tension-to-torsion actuation mechanism. Using theory, we quantitatively explain the complementary effects of an increase in muscle length and a large positive Poisson's ratio on torsional actuation and electronic properties.
We report the chain conformations of polymer molecules accommodated at the solid-polymer melt interfaces in equilibrium. Polystyrene "Guiselin" brushes (adsorbed layers) with different molecular weights were prepared on Si substrates and characterized by using x-ray and neutron reflectivity. The results are intriguing to show that the adsorbed layers are composed of the two different nanoarchitectures: flattened chains that constitute the inner higher density region of the adsorbed layers and loosely adsorbed polymer chains that form the outer bulklike density region. In addition, we found that the lone flattened chains, which are uncovered by the additional prolonged solvent leaching (∼120 days), are reversibly densified with increasing temperature up to 150 °C. By generalizing the chain conformations of bulks, we postulate that the change in probabilities of the local chain conformations (i.e., trans and gauche states) of polymer molecules is the origin of this densification process.
Thermal annealing is one of the most indispensable polymer fabrication processes and plays essential roles in controlling morphologies and properties of polymeric materials. We here report that thermal annealing also facilitates polymer adsorption from the melt on planar silicon (Si) substrates, resulting in the formation of a high-density polymer nanolayer with flattened chain confirmations. Three different homopolymers (polystyrene, poly(2-vinylpyridine), and poly(methyl methacrylate)), which have similar inherent stiffness and bulk glass transition temperature (T g ), but have different affinities with Si substrates, were chosen as models. Spin-cast films (∼50 nm in thickness) with the three polymers were prepared on cleaned Si substrates and then placed in a vacuum oven set at a temperature far above the bulk T g . In order to monitor the polymer adsorption process at the solid-polymer melt interface during thermal annealing, we used the protocol that combines vitrification of the annealed films (via rapid quench to room temperature) and subsequent intensive solvent leaching (to remove nonadsorbed chains). The detailed structures of the residual films (i.e., flattened layers with 2−3 nm in thickness) were characterized by using X-ray reflectivity and atomic force microscopy. As a result, we found that the film thicknesses of the flattened layers for the three different polymers increase as a power-law of annealing time before reaching the "quasiequilibrium" state where the film growth is saturated. We have also revealed that the final thickness of the flattened layer at the quasiequilibrium state increases with increasing the solid-segment interaction, while the kinetics becomes more sluggish. The observed formation kinetics corresponds to a "zipping-down" process of the transient flattened chains on planar solids in order to further increase the number of solid/segment points, which is the driving force for flattening so as to overcome the conformational entropy loss in the total free energy.
We report the origin of the effect of nanoscale confinement on the local viscosity of entangled polystyrene (PS) films at temperatures far above the glass transition temperature. By using marker x-ray photon correlation spectroscopy with gold nanoparticles embedded in the PS films prepared on solid substrates, we have determined the local viscosity as a function of the distance from the polymer-substrate interface. The results show the impact of a very thin adsorbed layer (~7 nm in thickness) even without specific interactions of the polymer with the substrate, overcoming the effect of a surface mobile layer at the air-polymer interface and thereby resulting in a significant increase in the local viscosity as approaching the substrate interface.
The stability or wettability of thin polymer films on solids is of vital interest in traditional technologies as well as in new emerging nanotechnologies. We report here that nanoscale structures of polymer chains adsorbed onto a solid surface play a crucial role in the thermal stability of the film. In this study, polystyrene (PS) spin-cast films (20 nm in thickness) with eight different molecular weights prepared on silicon (Si) substrates were used as a model. When low molecular weight (Mw≤ 50 kDa) PS films were subjected to thermal annealing at temperatures far above the bulk glass transition temperature, dewetting occurred promptly, while high molecular weight (Mw≥ 123 kDa) PS films were stable for at least 6 weeks at 150 °C. We reveal a strong correlation between the film stability and the two different interfacial structures of the adsorbed polymer chains: their opposing wettability against chemically identical free polymer chains results in a wetting-dewetting transition at the adsorbed polymer-free polymer interface. This is a unique aspect of the stability of polymer thin films and may be generalizable to other polymer systems regardless of the magnitude of solid-polymer attractive interactions.
We report the structural relaxation process of irreversibly adsorbed polymer chains via thermal annealing that lie flat on a solid (“flattened chains”). Amorphous polystyrene and quartz, which together constitute a weakly attractive system, was used as a model where the local chain conformations of the flattened chains were investigated by sum frequency generation spectroscopy (SFG). Two different film preparation processes (i.e., spin coating and dip coating methods) were utilized to create different initial chain conformations. The spin-coated and dip-coated PS thin films were annealed at a temperature far above the bulk glass transition temperature to reach the “quasiequilibrium” state and subsequently rinsed with chloroform to uncover the buried flattened chains. The SFG results revealed that the backbone chains (constituted of CH and CH2 groups) of the flattened PS chains preferentially orient to the weakly interactive substrate surface via thermal annealing regardless of the initial chain conformations, while the orientation of the phenyl rings becomes randomized. We postulate that increasing the number of surface-segmental contacts (i.e., enthalpic gain) is the driving force for the flattening process of the polymer chains, even onto a weakly interactive solid to overcome the conformational entropy loss in the total free energy.
Polypeptoids, a class of peptidomimetic polymers, have emerged at the forefront of macromolecular and supramolecular science and engineering as the technological relevance of these polymers continues to be demonstrated. The chemical and structural diversity of polypeptoids have enabled access to and adjustment of a variety of physicochemical and biological properties (eg, solubility, charge characteristics, chain conformation, HLB, thermal processability, degradability, cytotoxicity and immunogenicity). These attributes have made this synthetic polymer platform a potential candidate for various biomedical and biotechnological applications. This review will provide an overview of recent development in synthetic methods to access polypeptoid polymers with well-defined structures and highlight some of the fundamental physicochemical and biological properties of polypeptoids that are pertinent to the future development of functional materials based on polypeptoids. | I N TR ODU C TI ONPolypeptoids composed of N-substituted polyglycine backbones are structural mimics of polypeptides ( Figure 1). Because of N-substitution, polypeptoids lack stereogenic centers and hydrogen bonding interactions along the main chains, in sharp contrast to polypeptides.As a result, the global conformations of polypeptoids are strongly dependent on the N-substituent structures, giving rise to random coils or well-defined secondary structures [eg, polyproline I (PPI) helix [1][2][3][4][5][6] and R-sheets] [7][8][9][10][11][12] that are reminiscent of those of polypeptides. The polypeptoid backbone containing tertiary amide linkages is highly polar and hydrophilic. The physicochemical properties of polypeptoids can be tailored by the N-substituent structures, enabling control over the hydrophilicity and lipophilicity balance (HLB), charge characteristics, [13,14] backbone conformation, [1][2][3][4][5][6][7][8][9][10][11][12] solubility, [15][16][17][18][19][20] thermal and crystallization properties of the polypeptoids. [21][22][23][24] Without extensive hydrogen bonding, polypeptoids are thermally processable similar to conventional thermoplastics, [20][21][22][23][24] whereas polypeptides undergo thermal degradation before they can be melt-processed due to the extensive hydrogen bonding interactions. While polypeptoids exhibited enhanced proteolytic stability relative to peptides, [25,26] they can be oxidatively degraded under conditions that mimic tissue inflammation, [27] suggesting their potential in vivo uses as biodegradable materials.Recent advances in the controlled polymerization methods have enabled access to a suite of structurally well-defined polypeptoids with various N-substituent structures and molecular architectures, setting the stage for the future development of polypeptoid materials for various targeted applications. Several review articles on the synthesis, properties, and application of polypeptoids for biomedical or nonbiomedical uses have been published in recent years. [28][29][30][31][32] As a result, this...
The management of perovskite intermediates to construct perovskite films with uniform perovskite crystals and controlled surface morphology was introduced.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.