Densities, viscosities, and refractive indexes of the binary systems cyclohexanone + n-butanol, + sec-butanol, and + 2-methyl-1-propanol have been measured at 298.15 K and atmospheric pressure, over the whole composition range. The excess values of molar volume, viscosity, Gibbs free energy of activation of viscous flow, and internal pressure were calculated from experimental measurements. Based on the variations of the excess functions with composition, conclusions about the molecular interactions in these kinds of mixtures were obtained.
From experimental densities, viscosities, and refractive indexes for the acetylacetone + I-pentanol, + 2-Pentanol, + isoamyl alcohol, and + tert-amyl alcohol systems at 298.15 K, the excess molar volumes, excess viscosities, excess molar free energies of activation of flow. and excess internal pressures were calculated over the whole concentration range. Conclusions about the rnolecular interactions in these mixtures were drawn from the variations of the excess functions with the composition. ROQUE RIGGIO, HECTOR E. MARTINEZ ct NORMA Z . DE SALAS. Can. J. Chem. 70, 2859 (1992).Utilisant les densites, les viscositCs et les indices de refractions experimentaux des systemes acCtylacCtone + pentan-1-01, + pentan-2-01, + alcool isoamylique et + alcool tert-amylique, ii 298,15 K , on a calculC les volumes molaires en exces, les viscositCs en excks, les energies libres d'activation molaires en exctts de I'Ccoulement et les pressions internes en exctts, pour l'ensemble des concentrations. En se basant sur les variations des fonctions en exctts en fonction de la composition, on a pu tirer des conclusions relativement aux interactions niolCculaires presentes dans ces melanges.[Traduit par la redaction]
Densities, viscosities, and refractive indexes of three binary systems, tert-butyl methyl ether +n-butanol, +sec-butanol, +isobutanol, have been determined at 298.15 K and atmospheric pressure over the complete composition range. We also report calculated excess properties including molar volume, viscosity, and Gibbs free energy for the activation of flow for these systems. Keywords: binary systems, excess properties.
Se evaluó la hipótesis planteada, donde la exposición mínima de 20 horas semanales a varios reactivos, soluciones y solventes durante las prácticas académicas, limpieza de almacén de reactivos, de docentes, trabajadores y alumnos de la FQIQ de la UNMSM ocasiona un incremento de biomarcadores de exposición y efecto temprano. La frecuencia de micronúcleos en la mucosa bucal fue analizada para comprobar el efecto citogenético y citotóxico en dos poblaciones: Grupo Problema y Grupo Control, en dos etapas. Por cada población se tomó tres grupos de un total de 85 individuos, docentes (edad media: 56,6±6,48), trabajadores no docentes (edad media: 48,5±17,5) y estudiantes (edad media: 25,14±4,99). Se realizó el test de micronúcleo (Mn) en células epiteliales de la mucosa bucal, comparando los valores obtenidos de daño genotóxico y citotóxico para cada individuo y en cada toma de muestra; en el análisis estadístico se aplicó ANOVA con un valor de significancia de 95% de confiabilidad. Se encontró daño a nivel celular en la población problema en ambas etapas de la toma de muestra, principalmente a nivel de núcleo (aberraciones nucleares). El daño más frecuente en ambas etapas fue la anomalía de célula binucleada (26,70±16,44); seguido de células con cariólisis (7,17±5,89), picnosis (3,70±2,46) y “huevo roto” (3,17±3,92). No se encontró relación con respecto a la edad de los grupos evaluados en ninguna de las dos tomas. En cuanto a la relación entre los tipos de estamentos universitarios, los trabajadores no docentes presentan mayor daño (47,00±16,46), seguido de los docentes (29,50±14,50) y los estudiantes (17,00±10,00). En conclusión, existe daño citotóxico, genotóxico y apoptótico en la población problema, probablemente por la exposición crónica de sustancias químicas que dañan la integridad del ADN celular.
El presente estudio de investigación tiene como objetivo principal aplicar el método Sol-Gel para la preparación de nuevos materiales, en este caso específico a través de éste método se ha logrado sintetizar matrices de sílice (SiO2), empleando como reactivos silicato de sodio (Na2SiO3) y água (H2O) a través de reacciones de hidrólisis y condensación. La determinación del tiempo de felificación se ha realizado visualmente hasta la formación de la fase sólida del gel, como éste método es de alguna manera imprecisa, se ha empleado un turbidímetro en la determinación del grado de gelificación.La caracterización de los materiales obtenidos se han llevado a cabo por Difracción de Rayos X, es a través del digractrograma obtenido del material sintetizado que se verifica la presencia de la fase amorfa de la sílice, cuyo pico de difracción más importante se aprecia a un valor aproximado del ángulo 2θ = 27°. Las matrices de sílice son de gran importancia porque permiten encapsular una diversidad de moléculas, particulas, microorganismos, nanopartículas entre otros, los cuáles son de gran aplicación en medicina, electrónica, catalizadores y otras áreas de la Ciencia y la tecnología.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.