The purpose of this work is to study the synthesis, characterization, and catalytic performance of two types of solid heteropoly acid catalysts, namely, silicotungstic acid bulk (STAB) and STA-silica sol-gel (STA-SG) compared with sulfuric acid. From the XPS analyses, there was a significant formation of W-O-Si, W-O-W, and Si-O-Si bonding in STA-SG compared to that in STAB. The main spectra of O1s (90.74%, 531.5 eV) followed by other O1s peak (9.26%, 532.8 eV) were due to the presence of W-O-W and W-O-Si bonds, respectively. The STA-SG catalyst was found to be the more environmentally benign solid acid catalyst for the esterification reaction between oleic acid and glycerol due to its lower toxicity supported by silica via sol-gel technique. In addition, the ease of separation for STA-SG catalyst was attributed to its insoluble state in the product phase. The esterification products were then analysed by FTIR and HPLC. Both the H 2 SO 4 and the STAB gave high conversion of 100% and 98% but at a lower selectivity of GME with 81.6% and 89.9%, respectively. On the contrary, the STA-SG enabled a conversion of 94% but with a significantly higher GME selectivity of 95%, rendering it the more efficient solid acid catalyst.
Glycerol monooleate (GMO) as an esterification product of oleic acid and glycerol is highly potential as an anti-friction substance in the engine lubricant. The purpose of this work is to study the synthesis, characterization and catalytic performance of solid heteropoly acid catalysts, namely silicotungstic acid bulk (STAB) and STA-silica sol gel (STA-SG). The activity and selectivity of STAB and STA-SG in the esterification reaction have been investigated and compared to the homogeneous catalyst i.e. sulphuric acid (H2SO4). The synthesized catalysts were characterized by BET, XRD, TEM, XPS and TPD-NH3. BET analyses shown that the STA-SG catalyst is very high in surface area compared to STAB of 460.11 m2/g and 0.98 m2/g, respectively. From the XPS analyses, there was a significant formation of W-O-Si, W-O-W and Si-O-Si bonding in STA-SG compared to that in STAB. The main species of O1s (90.74 %, 531.5 eV) followed by other O1s peak (9.26 %, 532.8 eV) were due to the presence of W-O-W and W-O-Si bonds, respectively. In addition, the ease of separation for STA-SG catalyst was attributed to its insoluble state in the product phase. The esterification products were then analysed by FTIR and HPLC. Both the H2SO4 and the STAB gave high conversion of 100% and 98%, while lower selectivity of GME with 81.6% and 89.9%, respectively. On the contrary, the STA-SG enabled a conversion of 94%, while significantly higher GME selectivity of 95% rendering it the more efficient solid acid catalyst.
In this work, we were study the selective synthesis of GME from oleic acid and glycerol using two types of solid heteropoly acid catalysts, namely silicotungstic acid bulk (STAB) and STA-silica sol gel (STA-SG). The performance and selectivity of STAB and STA-SG in the esterification reaction have been investigated and compared to the sulphuric acid (H2SO4) as conventional homogeneous catalyst. The catalysts were then characterized their physical and chemical properties using BET, XRD, TEM and XPS. XPS analyses were shown a significant formation of W-O-Si, W-O-W and Si-O-Si bonding in STA-SG compared to that in STAB. The main spectra of O1s (90.74 %, 531.5 eV) followed by other O1s peak (9.26 %, 532.8 eV) were due to the presence of W-O-W and W-O-Si bonds, respectively. The STA-SG catalyst was found to be the more environmentally benign solid acid catalyst for the esterification reaction between oleic acid and glycerol due to its lower toxicity in terms of the relatively lower pH value (pH 3.7) than the STAB (pH 2.8). In addition, the ease of separation for STA-SG catalyst was attributed to its insoluble state in the product phase. The esterification products were then analysed by FTIR and HPLC. Both the H2SO4 and the STAB gave high conversion of 100 % and 98 %, but at a lower selectivity of GME with 81.6% and 89.9%, respectively. On the contrary, the STA-SG enabled a conversion of 94 %, but with a significantly higher GME selectivity of 95 % rendering it the more efficient solid acid catalyst.
In this study, polylactic acid (PLA) was incorporated with durian skin nanofibre (DSNF) and cinnamon essential oil (CEO), where the DSNF was extracted through freeze drying process. Supercritical carbon dioxide (SCCO2) acts as physical foaming agent for PLA biocomposite. The tensile strength and chemical interaction between PLA, DSNF, and CEO were investigated. The tensile strength of PLA biocomposite foamed reduced in presence of DSNF, however when only CEO incorporated in PLA the tensile increase and through FTIR graph functional group of PLA biocomposite foamed were identified.The foam structure produced after PLA biocomposite treated via SCCO2 was not fully nucleated and unstable as shown through SEM. The addition of DSNF and CEO did affect the PLA biocomposite foam.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.