Пермский национальный исследовательский политехнический университет, г. ПермьЦелью исследования было установление зависимости относительного износа элект-рода от его структуры и разработка материалов для электродов-инструментов с улуч-шенными характеристиками.Рассмотрены требования к электродам-инструментам для электроэрозионной про-шивки. Композиционные материалы на основе меди с различным содержанием туго-плавкой фазы изготовлены методом порошковой металлургии. Методами рентгенофазо-вого анализа и рамановской спектроскопии обнаружено образование интеркалированно-го медью графита и sp 3 связей в графите, спеченном с медью, которые способствуют повышению электропроводности и капиллярных свойств материала.Исследовано влияние содержания тугоплавкой фазы в системах «медь -тугоплав-кий металл», «медь -графит» на пористость, твердость, прочность, электросопротив-ление, относительную износостойкость электродов-инструментов из композиционных материалов. Установлено, что с увеличением содержания тугоплавких металлов увели-чивается пористость и электросопротивление композиционных материалов. Определе-но, что относительная износостойкость при электроэрозионной прошивке электрода-инструмента из композиционных материалов на основе меди, содержащих тугоплавкие металлы, более всего зависит от жаростойкости тугоплавкого металла; в системах на основе меди с графитом относительный износ уменьшается за счет повышения элект-ропроводности и капиллярного эффекта.Ключевые слова: электроэрозионная обработка, электрод-инструмент, компози-ционный материал, рамановская спектроскопия, интеркалирование, медь, тугоплавкие металлы, графит, эрозионная стойкость Введение. Электроэрозионная обработка (ЭЭО) основана на эффекте расплавления и испа-рения микропорций материала в основном под тепловым воздействием импульсов электрической энергии. Эта энергия выделяется в канале разряда между поверхностью обрабатываемой детали и электродом-инструментом, погруженным в жидкую (обычную неэлектропроводящую) среду. Следующие друг за другом импульсные разряды производят выплавление и испарение микро-порции материала; частицы расплавленного материала выбрасываются из зоны обработки разви-вающимся в канале разряда давлением, и электрод-инструмент получает возможность внедряться в обрабатываемую деталь [1].Электроды-инструменты (ЭИ) являются одними из основных элементов, участвующих в электроэрозионном процессе. Параметры их оказывают существенное влияние на стабильность электроэрозионного процесса, его эффективность и область использования. Производительность и качество ЭЭО также находятся в зависимости от материала ЭИ. Электрод-инструмент должен изготавливаться из эрозионностойкого материала, обеспечивать стабильную работу во всем диа-пазоне рабочих режимов ЭЭО и максимальную производительность, имея малый износ [2].Разработка новых технологических процессов создания эрозионностойких материалов, об-ладающих низкой стоимостью и высокой износостойкостью, представляет собой весьма важ-ную задачу и имеет большое экономическое значение, так как эрозионный износ ...