In high-speed single-carrier digital communication systems, processing blocks of signals using Fast Fourier Transforms is an efficient way to equalize (compensate) for interference between transmitted symbols.

Most comparisons between single carrier and multicarrier modulations assume frequency-domain linear equalization of the channel. In this paper we propose a new frequency-domain decision feedback equalizer (FD-DFE) for single carrier modulation, which makes use of a data block transmission format similar to that of the orthogonal frequency-division multiplexing with cyclic prefix (OFDM). The scheme is a nonadaptive DFE where the feedforward part is implemented in the frequency domain, while feedback signal is generated by time-domain filtering. Through simulations in a HIPERLAN-2 scenario, we show that FD-DFE yields a capacity very close to that of OFDM. This result is also confirmed by analytical derivations for a particular case. Furthermore, when no channel loading is considered, FD-DFE performs closely to OFDM for the same averaged frame error rate in a coded transmission. Design methods of the FD-DFE are investigated and a reduced complexity technique is developed, with the result that FD-DFE and OFDM have a similar computational complexity in signal processing.

An iterative block decision feedback equaliser (IB-DFE) for single carrier modulation is proposed. Filtering operations are implemented by discrete Fourier transforms (DFTs) which yield a reduced computational complexity, for both filter design and signal processing, when compared to existing DFEs. Moreover, the new IB-DFE operates on blocks of the receive signal, thus allowing the use of error correction codes on the feedback data signal

Error-propagation phenomena and computational complexity of the filters' design are important drawbacks of existing decision-feedback equalizers (DFE) for dispersive channels. In this paper, we propose a new iterative block DFE (IBDFE) which operates iteratively on blocks of the received signal. Indeed, a suitable data-transmission format must be used to allow an efficient implementation of the equalizer in the frequency domain, by means of the discrete Fourier transform. Two design methods are considered. In the first method, hard detected data are used as input of the feedback, and filters are designed according to the correlation between detected and transmitted data. In the second method, the feedback signal is directly designed from soft detection of the equalized signal at the previous iteration. Estimators of the parameters involved in the IBDFE design are also derived. From performance simulations on a wireless dispersive fading channel, we observed that the IBDFE outperforms existing DFEs. Moreover, the IBDFE exhibits a reduction of the computational complexity when compared against existing schemes, both in signal processing and in filter design

No abstract