high-voltage requirements. [1][2][3][4] However, the advancements of cathode active materials are overshadowed by the slow development of cathode binders, which should not be underestimated in terms of enabling practical cathode sheets. This issue becomes more stringent for the development of high-mass-loading cathode sheets, which have garnered considerable attention as a facile and scalable way to construct high-energy-density Li-ion batteries. [5][6][7] Major challenges facing the high-massloading cathode sheets include nonuniform electron/ion conduction networks in their through-thickness direction, [8][9][10][11][12] insufficient adhesion (between electrode active layers and current collectors) under electrolyte-soaked states, [13][14][15] and dissolution of transition metal (TM) ions from cathode active materials. [8,16,17] Notably, these challenges are closely dependent on cathode binders. Several previous studies on cathode binders have focused on the synthesis and engineering of new materials, with particular attention to replacing polyvinylidene fluoride (PVdF) binders that have been predominantly used in commercial cathodes. For example, gum materials [18,19] such as xanthan and guar gums with hydroxyl groups enhance the structural stability and electrochemical performance of overlithiated layered oxide (OLO) cathodes by chelating the dissolved TM ions. Carboxymethyl cellulose (CMC) exerted a strong binding force on OLO and mitigated the phase transition of OLO during cycling. [20,21] Owing to its hydroxyl groups, lignin enhanced the adhesion between LiNi 0.5 Mn 1.5 O 4 (LNMO) active materials and current collectors, and contributed to the formation of uniform cathode-electrolyte interphase (CEI). [22] In addition to these biomaterials, polyacrylic acid (PAA) [23] and Li-PAA [24] were explored as binders for the OLO and LNMO cathodes, which formed stable CEI layers and suppressed the dissolution of TM ions.However, these cathode binders were only suitable for aqueous slurry-based cathode fabrication processes due to their hydrophilic functional groups. More notably, these aqueous binders were not suitable for moisture-sensitive Ni-rich cathode active materials, which have gained considerable attention for high-energy-density Li-batteries used in long-range electric vehicles. The Ni-rich cathode active materials often undergo structural disruption when exposed to water molecules, [25] thus generating unwanted residual Li compounds such as LiOH and In contrast to noteworthy advancements in cathode active materials for lithium-ion batteries, the development of cathode binders has been relatively slow. This issue is more serious for high-mass-loading cathodes, which are preferentially used as a facile approach to enable high-energy-density Li-ion batteries. Here, amphiphilic bottlebrush polymers (BBPs) are designed as a new class of cathode binder material. Using poly (acrylic acid) (PAA) as a sidechain, BBPs are synthesized through ring-opening metathesis polymerization. The BBPs are amphiphilic in nature...

Lithium (Li) hosts, which can electrochemically accommodate Li in preformed pores of three-dimensional frameworks, have been investigated as an advanced electrode architecture for high-energy-density Li-metal batteries. However, most of the...

Summary In contrast to enormous progresses in electrode active materials, little attention has been paid to electrode sheets despite their crucial influence on practical battery performances. Here, as a facile strategy to address this issue, we demonstrate nanofibrous conductive electrode binders based on deoxyribonucleic acid (DNA)-wrapped single-walled carbon nanotubes (SWCNT) (denoted as DNA@SWCNT). DNA@SWCNT binder allows the removal of conventional polymeric binders and carbon powder additives in electrodes. As a proof of concept, high-capacity overlithiated layered oxide (OLO) is chosen as a model electrode active material. Driven by nanofibrous structure and DNA-mediated chemical functionalities, the DNA@SWCNT binder enables improvements in the redox reaction kinetics, adhesion with metallic foil current collectors, and chelation of heavy metal ions dissolved from OLO. The resulting OLO cathode exhibits a fast charging capability (relative capacity ratio after 15 min [versus 10 h] of charging = 83%), long cyclability (capacity retention = 98% after 700 cycles), and thermal stability.