Çalışmada eriyik yığma modelleme (FDM) yöntemi ile 3B yazıcı kullanarak üretilen PLA numunelerin mekanik özelliklerden olan çekme dayanımına işlem parametrelerinin etkisi belirlenmesi amaçlanmıştır. Bu amaçla çalışmada işlem parametreleri olarak 2 farklı doluluk oranı (%20 ve %100), 3 farklı baskı hızı (100,150 ve 200 mm/s), 3 farklı nozul sıcaklığı (180, 205 ve 220°C) ve 3 farklı desen çeşidi (Cubic, Grid, Triangle) seçilmiştir. Çalışmada, %20 doluluk oranına göre %100 doluluk oranında daha yüksek çekme gerilmesi elde edilmiştir. %20 doluluk oranındaki numuneler kendi aralarında kıyaslandığında elde edilen en yüksek çekme gerilmesi değeri 220 0 C nozul sıcaklığında, 100 mm/s baskı hızında yapılan Grid desen çeşidinde 43.12 MPa olarak ölçülmüştür. %100 doluluk oranında ise en iyi sonuç 220 0 C de, 100 mm/s baskı hızında üretilen numunede 59.21 MPa çıkmıştır. Çalışmada %20 doluluk oranındaki numuneler için istatistik analiz yapılmıştır. Varyans analiz (ANOVA) yöntemi sonucu güven düzeyi %94,4 elde edilmiştir.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.