Penelitian ini bertujuan untuk menghasilkan modul elektronik berbasis model pembelajaran self directed learning yang Valid, Praktis dan Eefektif. Sehingga dapat membatu siswa belajar mandiri dan memahami teori pengelasan busur manual SMAW. Penelitian ini adalah penelitian research and Development (R&D) yang merujuk pada model pengembangan instruksional ADDIE. Tahapan dalam prosedur pengembangan ADDIE yaitu Analysis, Design, Development, Implementation dan Evaluation. Hasil Penelitian berdasarkan penilaian validator ahli materi dan ahli media, modul elektronik yang dikembangkan valid. Berdasarkan respon guru dan siswa, modul elektronik yang dikembangkan memiliki praktikalitas tinggi. Hasil efektivitas diketahui dari peningkatan pemahaman teori siswa serta uji efektifitas dari materi yang di ujikan dengan hasil cukup efektif.
Penelitian bertujuan mengungkapkan hubungan prestasi belajar, social support orang tua dan harapan bekerja pada minat melanjutkan studi S2 pada mahasiswa Pendidikan Teknik Mesin FT-UNP. Jenis penelitian yang diberlakukan ialah quantitative research. Subjek penelitian ialah mahasiswa Pendidikan Teknik Mesin Angkatan 2018 FT-UNP sebanyak 76 mahasiswa. Teknik pengumpulan data memakai kuisioner (angket) dan dokumentasi. Teknik analisis data memakai metode correlational analysis. Hasil penelitian memperlihatkan: 1) Tidak terdapat hubungan prestasi belajar pada minat lanjut studi S2 pada mahasiswa pendidikan teknik mesin FT-UNP yang ditunjukan dengan nilai koefisien korelasi (r)= 0207, 2) terdapat adanya keterikatan hubungan dorongan sosial orang tua pada minat melanjutkan studi S2 peserta didik Pendidikan Teknik Mesin FT UNP yang diperlihatkan pada nilai korelasi koefisien (r) = 0,346, 3) dihubungan ekspektasi kerja pada minat melanjutkan studi S2 diperlihatkan dengan penilaian korelasi koefisien (r)= 0,314, 4) tampak hubungan prestasi belajar, social support orang tua dan harapan bekerja dengan bersama pada minat lanjut studi pascasarjana S2 peserta didik Pendidikan Teknik Mesin FT-UNP yang ditunjukkan dengan koefisien determinasi (R2)= 0,191. Nilai Sumbangan Relatif X1= 6,9%, X2=51,1%,X3=41,8%, dan total sumbangan efektif yaitu 19,1%. Hasil dari penelitian ini mengharapkan mahasiswa Pendidikan Teknik Mesin memiliki ketertarikan untuk lanjut pendidikan ke jenjang yang lebih tinggi yaitu pascasarjana (S2).
Las SMAW (Shielded Metal Arc Welding) merupakan kegiatan penggabungan dua logam atau lebih yang meanfaatkan bantuan energi panas guna mencairkan material kerja dan elektroda sebagai material tambahan pada proses pengelasan SMAW. Parameter utama yang menpengaruhi kualitas hasil pada proses pengelasan baja karbon rendah dengan pengelasan las busur listrik adalah besar arus listrik, semakin besar arus listrik dipakai pada proses pengelasan maka besar juga energi panas yang dihasilkan. Panas yang dihasilkan oleh proses pengelasan sangat berpengaruh pada hasil pengelasan sehingga apabila panas yang digunakan terlalu tinggi maka dapat merubah bagian struktur material. Penelitian ini dilaksanakan untuk melihat bagaimana pengaruh nilai kuat arus pada pengelasan SMAW menggunakan pengujian tarik. Jenis penelitian eksperimen yang diterapkan pada penelitian dengan melakukan pengelasan SMAW berdasarkan kuat arus pada proses pengelasan. Nilai kuat arus yang digunakan dalam penelitian ini yakni, 90, 100, dan 130 Ampere dengan mengunakan elektroda E-7018. Material pada penelitian ini merupakan baja karbon rendah berbentuk plat dengan ketebalan 8mm. Uji Tarik digunakan sebagai uji material dalam melihat seberapa besar pengaruh dari nilai kuat arus yang diteliti. Untuk nilai uji tarik tertinggi didapatkan pada arus 130 ampere dengan rata-rata kekuatan tarik 545,58 N/mm2. Berdasarkan hasil penelitian peningkatan nilai kekutan tarik berbanding lurus dengan nilai kuat arus dima nilai kekuatan tertinggi didapat pada arus 130 Ampere.
Pengelasan merupakan proses penyambungan logam dengan menggunakan bahan tambah berupa elektroda. Sebelum melakukan pengelasan salah satu faktor penting yaitu perlakuan elektroda. Hal tersebut penting dilakukan terutama pada perlakuan penyimpanan elektroda tipe <em>basic low hydrogen</em> (E7016). Penelitian sebelumnya menunjukkan bahwa pemanasan elektroda dapat menghindari retak sambungan las pada uji <em>face bend</em>. Tujuan penelitian ini yaitu untuk mengungkapkan pengaruh perlakuan suhu penyimpanan elektroda terhadap uji tekuk sambungan las. Metode dalam penelitian ini menggunakan penelitian eksperimen, dimana penelitian dilakukan dengan memberi perlakuan pada suhu penyimpanan elektroda. Elektroda diberi perlakuan suhu penyimpanan dengan variasi 40° C, 80° C, dan 120° C selama 30 menit. Elektroda yang digunakan yaitu jenis <em>low hydrogen</em> (E7016) dan material sampel menggunakan pelat SS400. Sambungan las menggunakan kampuh V tunggal dan pengelasan sampel menggunakan proses <em>shield metal arc welding</em>. Pengujian tekuk spesimen dilakukan sesuai standar American Welding Society D1.1. Hasil penelitian menunjukkan bahwa semakin tinggi suhu penyimpanan akan menghasilkan daya tahan retak yang baik pada uji <em>face bend </em>dibandingkan dengan hasil pengujian <em>root bend</em>.
This research explores the application of video as an interactive media, learning motivation of students and student learning outcomes. The purpose of this research for motivation and student learning outcomes. This type of research this is a class action Research (PTK), the population and the sample used at the class XI welding techniques as much as 29 students. The instruments used in the form of interactive media, video observation sheets and test of mastery. Data obtained from the motivation of learning i.e. the percentage and the results of the study are average. The learning motivation of students in cycle I meetings I was 50.86% criteria less motivated; the Icycle meeting II was 64.22% criteria sufficiently motivated; and in cycle II meeting was 73.71% criteria I motivated; cycle II II meeting was 84.48% criteria are very motivated. The results of a study on cycle I with an average of 70.24 and cycle II with an average of 84.37. The use of video as an interactive media can increase motivation and learning results Subjects Shield Metal Arc Welding (SMAW) Welding Technique Class XI in SMK Negeri 1 Bukittinggi
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.