Several wearable devices have already been commercialized and are likely to open up a new life pattern for consumers. However, the limited energy capacity and lifetime have made batteries the bottleneck in wearable technology. Thus, there have been growing efforts in the area of self-powered wearables that harvest ambient mechanical energy directly from surroundings. Herein, we demonstrate a woven triboelectric nanogenerator (WTENG) utilizing electrospun Polyvinylidene fluoride (PVDF) nanofibers and commercial nylon cloth to effectively harvest mechanical energy from human motion. The PVDF nanofibers were fabricated using a highly scalable multi-nozzle far-field centrifugal electrospinning protocol. We have also doped the PVDF nanofibers with small amounts of multi-walled carbon nanotubes (MWCNT) to improve their triboelectric performance by facilitating the growth of crystalline β-phase with a high net dipole moment that results in enhanced surface charge density during contact electrification. The electrical output of the WTENG was characterized under a range of applied forces and frequencies. The WTENG can be triggered by various free-standing triboelectric layers and reaches a high output voltage and current of about 14 V and 0.7 µA, respectively, for the size dimensions 6 × 6 cm. To demonstrate the potential applications and feasibility for harvesting energy from human motion, we have integrated the WTENG into human clothing and as a floor mat (or potential energy generating shoe). The proposed triboelectric nanogenerator (TENG) shows promise for a range of power generation applications and self-powered wearable devices.

No abstract

One-dimensional metal nanowires, with novel functionalities like electrical conductivity, optical transparency and high mechanical stiffness, have attracted widespread interest for use in applications such as transparent electrodes in optoelectronic devices and active components in nanoelectronics and nanophotonics. In particular, silver nanowires (AgNWs) have been widely researched owing to the superlative thermal and electrical conductivity of bulk silver. Herein, we present a detailed review of the synthesis of AgNWs and their utilization in fabricating improved transparent conducting electrodes (TCE). We discuss a range of AgNW synthesis protocols, including template assisted and wet chemical techniques, and their ability to control the morphology of the synthesized nanowires. Furthermore, the use of scalable and cost-effective solution deposition methods to fabricate AgNW based TCE, along with the numerous treatments used for enhancing their optoelectronic properties, are also discussed.

No abstract

Abstract:Two-dimensional SnS x (x = 1, 2) nanocrystals are attractive catalysts for photoelectrochemical water splitting as their components are earth abundant and environmentally friendly. We have fabricated SnS thin-film photoelectrodes by spin coating mixed-phase SnS nanocrystals synthesized via a hot-injection technique on glass/Cr/Au substrates. The obtained SnS thin films can be transformed into SnS 2 by introducing structural phase changes via a facile low-vacuum annealing protocol in the presence of sulfur. This sulfurization process enables the insertion of sulfur atoms between layers of SnS and results in the generation of shallow donors that alter the mechanism for water splitting. The SnS 2 thin films are used as stable photocatalysts to drive the oxygen evolution reaction, and the light-current density of 0.195 mA/cm 2 at 0.8 V vs. Ag/AgCl can be achieved due to the high carrier density, lower charge transfer resistance, and a suitable reaction band position. Based on a combination of UV-Vis spectroscopy (ultraviolet and visible spectroscopy), cyclic voltammetry and Mott-Schottky analysis, the band positions and band gaps of SnS and SnS 2 relative to the electrolyte are determined and a detailed mechanism for water splitting is presented. Our results demonstrate the potential of layered tin sulfide compounds as promising photocatalysts for efficient and large-scale water splitting.

No abstract

No abstract

No abstract