The remarkable underwater adhesion strategy employed by mussels has inspired bioadhesives that have demonstrated promise in connective tissue repair, wound closure, and local delivery of therapeutic cells and drugs. While the pH of oxygenated blood and internal tissues is typically around 7.4, skin and tumor tissues are significantly more acidic. Additionally, blood loss during surgery and ischemia can lead to dysoxia, which lowers pH levels of internal tissues and organs. Using 4-armed PEG end-capped with dopamine (PEG-D) as a model adhesive polymer, the effect of pH on the rate of intermolecular cross-linking and adhesion to biological substrates of catechol-containing adhesives was determined. Adhesive formulated at an acidic pH (pH 5.7–6.7) demonstrated reduced curing rate, mechanical properties, and adhesive performance to pericardium tissues. Although a faster curing rate was observed at pH 8, these adhesives also demonstrated reduced mechanical and bioadhesive properties when compared to adhesives buffered at pH 7.4. Adhesives formulated at pH 7.4 demonstrated a good balance of fast curing rate, elevated mechanical properties and interfacial binding ability. UV–vis spectroscopy evaluation revealed that the stability of the transient oxidation intermediate of dopamine was increased under acidic conditions, which likely reduced the rate of intermolecular cross-linking and bulk cohesive properties for hydrogels formulated at these pH levels. At pH 8, competing cross-linking reaction mechanisms and reduced concentration of dopamine catechol due to auto-oxidation likely reduced the degree of dopamine polymerization and adhesive strength for these hydrogels. pH plays an important role in the adhesive performance of mussel-inspired bioadhesives and the pH of the adhesive formulation needs to be adjusted for the intended application.

Dopamine mimics the exceptional moisture-resistant adhesive properties of the amino acid, DOPA, found in adhesive proteins secreted by marine mussels. The catechol side chain of dopamine was functionalized with a nitro-group, and the effect of the electron withdrawing group modification on the cross-linking chemistry and bioadhesive properties of the adhesive moiety was evaluated. Both nitrodopamine and dopamine were covalently attached as a terminal group onto an inert, 4-armed poly(ethylene glygol) (PEG-ND and PEG-D, respectively). PEG-ND and PEG-D exhibited different dependence on the concentration of NaIO4 and pH, which affected the curing rate, mechanical properties, and adhesive performance of these biomimetic adhesives differently. PEG-ND cured instantly and its bioadhesive properties were minimally affected by the change in pH (5.7–8) within the physiological range. Under mildly acidic conditions (pH 5.7 and 6.7), PEG-ND outperformed PEG-D in lap shear adhesion testing using wetted pericardium tissues. However, nitrodopamine only formed dimers, which resulted in the formation of loosely cross-linked network and adhesive with reduced cohesive properties. UV–vis spectroscopy further confirmed nitrodopamine’s ability for rapid dimer formation. The ability for nitrodopamine to rapidly cure and adhere to biological substrates in an acidic pH make it suitable for designing adhesive biomaterials targeted at tissues that are more acidic (i.e., subcutaneous, dysoxic, or tumor tissues).

No abstract

The properties of foams, an important class of cellular solids, are most sensitive to the volume fraction and openness of its elementary compartments; size, shape, orientation, and the interconnectedness of the cells are other important design attributes. Control of these morphological traits would allow the tailored fabrication of useful materials including highly porous solids, anisotropic heat conductors, tough composites, among others. While approaches like ice templating has produced foams with elongated cells, there is a need for rapid, versatile, and energy efficient methods that also control the local order and macroscopic alignment of cellular elements. Here we describe a fast and convenient method to obtain anisotropic structural foams using frontal polymerization. We fabricated foams by curing mixtures of dicyclopentadiene and a physical blowing agent via frontal ring opening metathesis polymerization (FROMP). The materials were characterized using micro-computed tomography and an image analysis protocol to quantify morphological characteristics including volume fraction and anisotropy. The cellular structure, porosity, and hardness of the foams changed with blowing agent, concentration, and resin viscosity. Moreover, we used a full factorial combination of variables to correlate each parameter with the structure of the obtained foams. We found a strong correlation between the resin viscosity and the foam's cellular structure. Furthermore, a specific combination of input parameters controlled the transitions from (i) isotropic to anisotropic cellular structures, (ii) porous to non-porous, and (iii) soft to hard foams. Our results demonstrate the controlled production of foams with specific morphologies using the simple and efficient method of frontal polymerization. This work shows promise for creating foams with aligned cellular structures that allow anisotropic mass and energy transport properties in high performance structural solids.

Polymers are incredibly versatile materials and have become ubiquitous. Increasingly, researchers are using data science and polymer informatics to design new materials and understand their structure–property relationships. Polymer informatics is an emerging field. While there are many useful tools and databases available, many are not widely utilized. Herein, we introduce the field of polymer informatics and discuss some of the available databases and tools. We cover how to share polymer data, approaches for preparing a dataset for machine learning and recent applications of machine learning to polymer property prediction and polymer synthesis. © 2021 Society of Industrial Chemistry.

Frontal ring-opening metathesis polymerization (FROMP) catalyzed by Grubbs-type Ru complexes enables new, rapid, and energy-efficient syntheses of high-performance, structural plastics. Ideal catalysts survive the extended time periods associated with resin preparation, storage, and transportation. Current catalysts, however, induce premature polymerization within hours to days under ambient conditions. In this work, a thermally latent bis-N-heterocyclic carbene complex provides exceedingly robust resins, which are viable for 8 weeks. When mixed with CuI coreagents, precatalyst activation primes the system for rapid reactivity after thermal initiation. In this study, more than 40 dual-component formulations successfully catalyzed FROMP of dicyclopentadiene. The polymerization process parameters (front temperatures and velocities), resin storability, and resultant polymer properties (e.g., T g) were determined for each composition. Intriguingly, the Cu to Ru ratio dramatically impacts the observed frontal velocity and temperature, as well as the polymer glass-transition temperature; slower, colder reaction fronts result from formulations with large Cu to Ru ratios. The resultant polymers display lower T g values. Mechanistic analysis of a related model system demonstrated that an excess Cu reagent decreases the activation and polymerization rates.

Selective CO 2 capture and electrochemical conversion are important tools in the fight against climate change. Industrially, CO 2 is captured using a variety of aprotic solvents due to their high CO 2 solubility. However, most research efforts on electrochemical CO 2 conversion use aqueous media and are plagued by competing hydrogen evolution reaction (HER) from water breakdown. Fortunately, aprotic solvents can circumvent HER, making it important to develop strategies that enable integrated CO 2 capture and conversion. However, the influence of ion solvation and solvent selection within nonaqueous electrolytes for efficient and selective CO 2 reduction is unclear. In this work, we show that the bulk solvation behavior within the nonaqueous electrolyte can control the CO 2 reduction reaction and product distribution occurring at the catalyst−electrolyte interface. We study different tetrabutylammonium (TBA) salts in two electrolyte systems with glyme ethers (e.g., 1,2 dimethoxyethane or DME) and dimethyl sulfoxide (DMSO) as a low and high dielectric constant medium, respectively. Using spectroscopic tools, we quantify the fraction of ion pairs that forms within the electrolyte. Also, we show how ion pair formation is prevalent in DME and is dependent on the anion type. More importantly, we show that as ion pair formation decreases within the electrolyte, CO 2 current densities increase, and a higher CO Faradaic efficiency is observed at low overpotentials. Meanwhile, in an electrolyte medium where the ion pair fraction does not change with the anion type (such as in DMSO), a smaller influence of solvation is observed on CO 2 current densities and product distribution. By directly coupling bulk solvation to interfacial reactions and product distribution, we showcase the importance and utility of controlling the reaction microenvironment in tuning the electrocatalytic reaction pathways. Insights gained from this work will enable novel electrolyte designs for efficient and selective CO 2 conversion to desired fuels and chemicals.

No abstract