No abstract

No abstract

We used x-ray diffractometry (XRD), x-ray photoelectron spectrometry (XPS), and secondary-ion mass spectrometry (SIMS) to investigate the mechanism of the interfacial room-temperature (RT) chemical reaction between cation-deficient La0.56Li0.33TiO3 solid electrolytes and metallic lithium anodes in all-solid-state lithium batteries. A stoichiometric mixture of La2O3, Li2CO3, and TiO2 powders was calcined at 1250 °C for 8 h to obtain a single perovskite structure of La0.56Li0.33TiO3. When this La0.56Li0.33TiO3 sample and lithium were placed in contact at room temperature for 24 h, the phase of the La0.56Li0.33TiO3 remained unchanged. The XPS results indicate that 12% of the tetravalent Ti4+ ions were converted into trivalent Ti3+ ions. The valence conversion and degree of conversion were limited by the structural rigidity of the host crystal. Our SIMS analysis suggests the existence of a local electric field near the contact surface and indicates that the 6Li+ isotope ions were inserted into the specimen through the effect of this field. The change in the electrical properties of La0.56Li0.33TiO3 supports this mechanism for the interfacial reaction. The ionic conductivities of the grain and total grain boundary decreased and increased, respectively, after the insertion of Li+, and the total electronic conductivity increased as a result of the presence of intervalence electron hopping between mixed Ti3+/Ti4+ states. The mechanism of the lithium-activated RT interfacial reaction is associated with the reduction of Ti4+ transition metal ions from tetravalent to trivalent states and the local-electric-field-induced Li+ insertion into La3+/Li+-site vacancies of La0.56Li0.33TiO3.

The preparation of TiO2 nanocrystallite powders coated with and without 9 mol% ZnO has been studied for cosmetic applications in sunscreens by a co-precipitation process using TiCl4 and Zn(NO3)2·6H2O as starting materials. XRD results show that the phases of anatase TiO2 and rutile TiO2 coexist for precursor powders without added ZnO (T-0Z) and calcined at 523 to 973 K for 2 h. When the T-0Z precursor powders are calcined at 1273 K for 2 h, only the rutile TiO2 appears. In addition, when the TiO2 precursor powders contain 9 mol% ZnO (T-9Z) are calcined at 873 to 973 K for 2 h, the crystallized samples are composed of the major phase of rutile TiO2 and the minor phases of anatase TiO2 and Zn2Ti3O8. The analyses of UV/VIS/NIR spectra reveal that the absorption of the T-9Z precursor powders after being calcined has a red-shift effect in the UV range with increasing calcination temperature. Therefore, the TiO2 nanocrystallite powders coated with 9 mol% ZnO can be used as the attenuate agent in the UV-A region for cosmetic applications in sunscreens.

This version is available at https://strathprints.strath.ac.uk/18785/ Strathprints is designed to allow users to access the research output of the University of Strathclyde. Unless otherwise explicitly stated on the manuscript, Copyright © and Moral Rights for the papers on this site are retained by the individual authors and/or other copyright owners. Please check the manuscript for details of any other licences that may have been applied. You may not engage in further distribution of the material for any profitmaking activities or any commercial gain. You may freely distribute both the url (https://strathprints.strath.ac.uk/) and the content of this paper for research or private study, educational, or not-for-profit purposes without prior permission or charge.Any correspondence concerning this service should be sent to the AbstractThe purpose of this study was to test ιν−ϖιτρο the micro and nano tribological properties of Y−TZP (Yttria Tetragonal Zirconia Polycrystalline) material used in the construction of artificial teeth or dental crowns. The results showed that the effect of pH was to accelerate the wear rate of the Y−TZP material. However, this phenomenon was more apparent in acid than in alkaline environments. Wear maps were constructed based on the results identifying wastage regimes for the material in the erosion−corrosion conditions at a range of impact angles. In addition, a wear map was generated based on the transition from tetragonal to monoclininc phase for the material and the transition to high wear at various pHs and exposure times.

No abstract

No abstract

No abstract