Infrared nanospectroscopy enables novel possibilities for chemical and structural analysis of nanocomposites, biomaterials or optoelectronic devices. Here we introduce hyperspectral infrared nanoimaging based on Fourier transform infrared nanospectroscopy with a tunable bandwidth-limited laser continuum. We describe the technical implementations and present hyperspectral infrared near-field images of about 5,000 pixel, each one covering the spectral range from 1,000 to 1,900 cm−1. To verify the technique and to demonstrate its application potential, we imaged a three-component polymer blend and a melanin granule in a human hair cross-section, and demonstrate that multivariate data analysis can be applied for extracting spatially resolved chemical information. Particularly, we demonstrate that distribution and chemical interaction between the polymer components can be mapped with a spatial resolution of about 30 nm. We foresee wide application potential of hyperspectral infrared nanoimaging for valuable chemical materials characterization and quality control in various fields ranging from materials sciences to biomedicine.

Nano-FTIR spectroscopy based on Fourier transform infrared near-field spectroscopy allows for label-free chemical nanocharacterization of organic and inorganic composite surfaces. The potential capability for subsurface material analysis, however, is largely unexplored terrain. Here, we demonstrate nano-FTIR spectroscopy of subsurface organic layers, revealing that nano-FTIR spectra from thin surface layers differ from that of subsurface layers of the same organic material. Further, we study the correlation of various nano-FTIR peak characteristics and establish a simple and robust method for distinguishing surface from subsurface layers without the need of theoretical modeling or simulations (provided that chemically induced spectral modifications are not present). Our experimental findings are confirmed and explained by a semi-analytical model for calculating nano-FTIR spectra of multilayered organic samples. Our results are critically important for the interpretation of nano-FTIR spectra of multilayer samples, particularly to avoid that geometry-induced spectral peak shifts are explained by chemical effects.

Waterborne acrylic‐alkyd nanocomposites are expected to combine the positive properties of alkyd resins and acrylic polymers. In this work, the kinetics of the miniemulsion polymerization used to synthesize these nanocomposites and the effect of the process variables on the polymer architecture and particle morphology was investigated. It was found that resin hydrophobicity and the type of initiator strongly affected the microstructure of these materials. The mechanisms responsible for these effects were discussed. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4871–4885, 2009

No abstract

The use of the renewable resource oleic acid to produce environmentally friendly polymeric materials with potential applications as coatings was investigated in this work. Methacrylated derivative oleic acid monomer was synthesized by addition of the carboxylic acid with glycidyl methacrylate, with the aim of preserving the double bonds of the acid backbone. Two catalysts with auto-oxidative potential were used for that purpose and the resulting monomer was further polymerized via free radical miniemulsion polymerization. Total conversion latexes with a significant amount of gel, mainly because of the crosslinking through the double bonds of the oleic acid, were obtained. No influence of the monomer type on the kinetics and microstructural properties was observed. Polymer films were evaluated and an important improvement on mechanical properties was achieved by the auto-oxidative curing of the remaining unsaturations along the polymer backbone, promoted by the catalyst present in the latex. V C 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 50: [4628][4629][4630][4631][4632][4633][4634][4635][4636][4637] 2012

Novel waterborne polymeric materials based on renewable resource monomers have been prepared by the environmentally friendly miniemulsion polymerization of an oleic acid‐derivative monomer (MOA) and the α‐methylene‐γ‐butyrolactone (α‐MBL). The effect of the incorporation of different amounts of α‐MBL on kinetics and polymer microstructure is investigated. The estimation of the monomer reactivity ratios (rα‐MBL = 0.49 and rMOA = 1.26) shows the slight lower reactivity of the α‐MBL, resulting in a random copolymer moderately enriched with MOA at the beginning of the reaction. The thermal and mechanical properties of the polymers demonstrate that by incorporating the lactone it is possible to produce copolymers in a broad range of glass transition temperatures, with high thermal stability and improved mechanical properties. This study provides a new green route toward the bio‐sourced preparation of polymer latexes with tuneable properties, which can range from coatings to adhesives. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014, 52, 3543–3549

No abstract

No abstract