Abstract-A Ka-band inset-fed microstrip patches linear antenna array is presented for the fifth generation (5G) applications in different countries. The bandwidth is enhanced by stacking parasitic patches on top of each inset-fed patch. The array employs 16 elements in an H-plane new configuration. The radiating patches and their feed lines are arranged in an alternating out-of-phase 180-degree rotating sequence to decrease the mutual coupling and improve the radiation pattern symmetry. A (24.4%) measured bandwidth (24.35 to 31.13 GHz)is achieved with -15 dB reflection coefficients and 20 dB mutual coupling between the elements. With uniform amplitude distribution, a maximum broadside gain of 19.88 dBi is achieved. Scanning the main beam to 49.5• from the broadside achieved 18.7 dBi gain with -12.1 dB sidelobe level (SLL). These characteristics are in good agreement with the simulations, rendering the antenna to be a good candidate for 5G applications.
An approach is proposed to reduce mutual coupling between two closely spaced radiating elements. This is achieved by inserting a fractal isolator between the radiating elements. The fractal isolator is an electromagnetic bandgap structure based on metamaterial. With this technique, the gap between radiators is reduced to ∼0.65λ for the reduction in the mutual coupling of up to 37, 21, 20, and 31 dB in the X-, Ku-, K-, and Ka-bands, respectively. With the proposed technique, the two-element antenna is shown to operate over a wide frequency range, i.e.,
Wearable antennas have gained much attention in recent years due to their attractive features and possibilities in enabling lightweight, flexible, low cost, and portable wireless communication and sensing. Such antennas need to be conformal when used on different parts of the human body, thus need to be implemented using flexible materials and designed in a low profile structure. Ultimately, these antennas need to be capable of operating with minimum degradation in proximity to the human body. Such requirements render the design of wearable antennas challenging, especially when considering aspects such as their size compactness, effects of structural deformation and coupling to the body, and fabrication complexity and accuracy. Despite slight variations in severity according to applications, most of these issues exist in the context of body-worn implementation. This review aims to present different challenges and issues in designing wearable antennas, their material selection, and fabrication techniques. More importantly, recent innovative methods in back radiations reduction techniques, circular polarization (CP) generation methods, dual polarization techniques, and providing additional robustness against environmental effects are first presented. This is followed by a discussion of innovative features and their respective methods in alleviating these issues recently proposed by the scientific community researching in this field.
INDEX TERMSWearable devices, Internet of Things (IoT), wearable antennas, flexible, reconfigurable antennas, energy harvesting for wearable devices, specific absorption rate (SAR).
This paper presents a unique technique to enhance isolation between transmit/receive radiating elements in densely packed array antenna by embedding a metamaterial (MTM) electromagnetic bandgap (EMBG) structure in the space between the radiating elements to suppress surface currents that would otherwise contribute towards mutual coupling between the array elements. The proposed MTM-EMBG structure is a cross-shaped microstrip transmission line on which are imprinted two outward facing E-shaped slits. Unlike other MTM structures, there is no short-circuit grounding using via-holes. With this approach, the maximum measured mutual coupling achieved is −60 dB @ 9.18 GHz between the transmit patches (#1 & #2) and receive patches (#3 & #4) in a four-element array antenna. Across the antenna's measured operating frequency range of 9.12-9.96 GHz, the minimum measured isolation between each element of the array is 34.2 dB @ 9.48 GHz, and there is no degradation in radiation patterns. The average measured isolation over this frequency range is 47 dB. The results presented confirm the proposed technique is suitable in applications such as synthetic aperture radar and multiple-input multiple-output systems. INDEX TERMS Metamaterial, electromagnetic bandgap, array antennas, decoupling slab, mutual coupling, synthetic aperture radar, multiple-input multiple-output.
In this paper, a compact, broadband, planar array antenna with omnidirectional radiation in horizontal plane is proposed for the 26 GHz fifth-generation (5G) broadcast applications. The antenna element is composed of two dipoles and a substrate integrated cavity (SIC) as the power splitter. The two dipoles are placed side-by-side at both sides of the SIC and they are compensated with each other to form an omni-directional pattern in horizontal plane. By properly combing the resonant frequencies of the dipoles and the SIC, a wide impedance bandwidth from 24 to 29.5 GHz is achieved. To realize a large array while reducing the complexity, loss and size of the feeding network, a novel dual-port structure combined with radiation and power splitting functions is proposed for the 1 st time. The amplitude and phase on each element of the array can be tuned, and therefore, the grating lobes level can be significantly reduced. Based on the dual-port structure, an 8-element array with an enhanced gain of over 12 dBi is designed and prototyped. The proposed antenna also features low profile, low weight and low cost, which is desirable for 5G commercial applications. Measured results agree well with the simulations, showing that the proposed high-gain array antenna has a broad bandwidth, omni-directional pattern in horizontal plane, and low side-lobes.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.