This paper deals with the effect of machining parameters on tool wear, surface roughness and cutting forces in dry turning of low carbon steel with deep cryo-treated AISI D3 tool steel. AISI D3 tool steel was used for preparation of cutting tools as per International Standard Organization (ISO: 3685-1993). Deep cryogenic treatment ([Formula: see text]C) of D3 tool steel was carried out at different holding time (12[Formula: see text]h, 24[Formula: see text]h and 36[Formula: see text]h) followed by tempering at [Formula: see text]C for 2[Formula: see text]h. Taguchi’s L27 orthogonal array is used for optimizing the process parameters during machining process. Analysis of variance (ANOVA) was carried out to study the significance of the input parameters. Mathematical models were developed using linear regression analysis for validating results. The tool worn surface shows the abrasion wear and oxidation wear were the main wear mechanisms observed under higher speed and feed rate cutting conditions.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.