Plant-based materials have found their application in the packaging with a yearly growing production rate. These naturally biodegradable polymers are obtained from renewable and sustainable natural resources with reduced environmental impact and affordable cost. These materials have found their utilization in fully-renewable plant-based packaging products, such as Tetra Pak®-like containers, by replacing commonly-used polyethylene as the polymer component. Poly(lactic acid) (PLA) is one of the representative plant-based polymers because of its eco-friendliness and excellent chemical and mechanical properties. In this work, a PLA surface was modified by various food additives, namely ascorbic acid (ASA) and fumaric acid (FA), using plasma-initiated grafting reactions in order to improve the surface and adhesion properties of PLA. Various analytical and microscopic techniques were employed to prove the grafting process. Moreover, the improved adhesion of the modified PLA foil to aluminum (Al) foil in a laminate configuration was proven by peel resistance measurements. The peel resistance of modified PLA increased by 74% and 184% for samples modified by ASA and FA, respectively, compared with untreated PLA.
Nowadays, there has been growing interest in the Massive MIMO as a result of improving throughput by leveraging spatial freedom and array gain. It is equipped with millimeter wave (mm Wave) bands to resolve the high path-loss. It is known from the literature that iterated algorithms are usually used to attain the hybrid precoders to accomplish a specific optimization objective. Thus, the complexity remains high because each iteration may include singular value decomposition, the matrix inversion, and so on that motivates us to split the hybrid precoding and combining problem into sub-problems. The proposed solution is a multiuser Massive MIMO hybrid beamforming based on a convex optimization problem that is applied and solved for estimating the digital precoding to eliminate inter-user interference while using codebooks to select analog beamformers. It is apparent in the majority of cases; the proposed beamforming performance is higher than only-analog beamforming, single-user (no interference), the ZF precoding, the MMSE precoding, and the Kalman precoding where the full digital solution is a considerable as the benchmark point with different scenarios due to the reduction of user interference. Thus, there is no consideration for complicated operations such as SVD or inversion matrices as well as no need for data estimation. Our proposed solution can serve a large number of users simultaneously due to more directive gain by using numerous antennas at BS. Based on its less complexity and keeping performance, our solution can be recommended.
Many biomedical applications including controlled drug delivery systems have been developed based on hydrogel technologies. Different composite hydrogels including synthetic and natural polymers can be produced to controllable systems in drug deliver application. In this study, poly vinyl alcohol (PVA)-Gelatin hydrogel membranes were prepared by the esterification reaction between hydroxyl groups of PVA and carboxyl groups of Gelatin to deliver Captopril as a model of drug. Captopril was successfully loaded into PVA-Gelatin hydrogel membrane in different ration
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.