This paper is devoted to an investigation on the methane sensing properties of graphene (G), decorated with silver nanoparticles (AgNPs), under ambient conditions. To do so, we first present an effective modification in the standard manner of decorating graphene by AgNPs. From structural analysis of the product (AgNPs/G), it is concluded that graphene is indeed decorated by AgNPs of a mean size 29.3 nm, free of aggregation, with a uniform distribution. The so-produced material is then used, as a resistivity-based sensor, to examine its response to the presence of methane gas. Our measurements are performed at relatively low temperatures, for various silver-to-graphene mass ratios (SGMRs) and methane concentrations. To account for the effects of humidity, we have made the measurements, at room temperature, for different levels of humidity. Our results demonstrate that an increase in the SGMR enhances the response of AgNPs/G to methane with an optimum value of SGMR ≅ 12%. It is also illustrated that for methane concentrations less than 2000 ppm, the maximal response increases linearly and rapidly, even at room temperature. Moreover, we demonstrate that AgNPs/G is of low limit of detection, highly stable, selective, reversible, repeatable, and sensor-to-sensor reproducible, for methane sensing. The results thus promise a low-cost and simple-to-fabricate methane sensing device.

No abstract

No abstract

In the present study, the carbon monoxide (CO) sensing property of Cu(II)−Laspartic acid nanofibers/polyaniline (PANI) nanofibers composite was investigated at room temperature. The nanofiber composite was formed through the ultrasound mixing of emeraldine salt PANI nanofibers and Cu(II)−L-aspartic acid nanofibers, which were synthesized by using a polymerization process and simple self-assembly method, respectively. The nanofibers composite demonstrated a branched structure in which the Cu(II)−L-aspartic acid nanofiber framework is similar to the trunk of a tree and the polyaniline nanofibers is like its branches. It seems that this special structure and one-dimension/one-dimension interface are suitable for gas adsorption and sensing. The performance of the prepared sensor toward CO gas was investigated at room temperature in a wide concentration range (200−8000 ppm). The experimental results indicate that the incorporation of amino acid-based copper metal− biomolecule framework nanofibers to PANI nanofibers enhances the response value (12.41% to 4000 ppm), yielding good selectivity and acceptable response and recovery characteristics (220 s/240 s) at room temperature. The detection limit of Cu(II)−L-aspartic acid nanofibers/PANI nanofibers sensor for carbon monoxide is obtained at 120 ppm.

No abstract