In the present study, the performance of the support vector machine for estimating vertical drop hydraulic parameters in the presence of dual horizontal screens has been investigated. For this purpose, 120 different laboratory data were used to estimate three parameters of the drop: the relative length, the downstream relative depth, and the residual relative energy in the support vector machine. For each parameter, 12 models were analyzed by using a support vector machine. The performance of the models was evaluated with statistical criteria (R2, DC, and RMSE) and the best model was introduced for each of the parameters. The evaluation criteria for the relative length of the vertical drop equipped with dual horizontal screens for the testing stage are R2 = 0.992, DC = 0.981 and, RMSE = 0.050. Also, the values of the downstream relative depth evaluation indicators for the testing stage are R2 = 0.9866, DC = 0.980 and, RMSE = 0.0064. For the residual relative energy parameter, the values of the residual relative energy evaluation indicators are R2 = 0.9949, DC = 0.9853 and RMSE = 0.0056. The results showed that capacity for this approach to predict the hydraulic performance of these systems with accuracy.
The present study investigated the application of support vector machine algorithms for predicting hydraulic parameters of a vertical drop equipped with horizontal screens. The study incorporated varying sizes of a rectangular channel. Horizontal screens, in addition to being able to dissipate the destructive energy of the flow, cause turbulence. The turbulence in turn supplies oxygen to the system through the promotion of air–water mixing. To achieve the objectives of the present study, 164 experiments were analyzed under the same experimental conditions using a support vector machine. The approach utilized dimensionless terms that included scenario 1: the relative energy consumption and scenario 2: the relative pool depth. The performance of the models was evaluated with statistical criteria (RMSE, R2 and KGE) and the best model was introduced for each of the parameters. RMSE is the root mean square error, R2 is the correlation coefficient and KGE is the Kling–Gupta criterion. The results of the support vector machine showed that for the first scenario, the third combination with R2 = 0.991, RMSE = 0.00565 and KGE = 0.998 for the training mode and R2 = 0.991, RMSE = 0.00489 and KGE = 0.991 for the testing mode were optimal. For the second scenario, the third combination with R2 = 0.988, RMSE = 0.0395 and KGE = 0.998 for the training mode and R2 = 0.988, RMSE = 0.0389 and KGE = 0.993 for the testing mode were selected. Finally, a sensitivity analysis was performed that showed that the yc/H and D/H parameters are the most effective parameters for predicting relative energy dissipation and relative pool depth, respectively.
This study aims to provide a way to increase the energy dissipation of flow in the inclined drop with environmental and economic considerations. Eighty-one experiments were performed on three types of simple inclined drop and inclined drop equipped with hole and without hole fishway elements with a 200~600 L/min flow rate. In this study, the effect of using fishway elements on hydraulic parameters regarding flow pattern, energy dissipation, relative downstream depth, relative aeration length, relative length of the hydraulic jump, and downstream Froude number of an inclined drop was investigated through physical modeling following the symmetry law. The results showed that in all experimental models, with increasing the relative critical depth parameter, the energy dissipation values increase, and the downstream Froude number decreases. The parameters of relative downstream depth, relative length of a hydraulic jump, and relative aeration length also increase with increasing relative critical depth. On average, 88% of the flow energy dissipation increases with the design of the fishway elements on the structure compared to the simple drop. Model M7 (with holes fish elements) shows the highest energy dissipation, and Model M2 (without holes fish elements) has the highest flow aeration length and relative downstream water depth.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.