A two-step ligand-exchange strategy is developed, in which the long-carbon- chain ligands on all-inorganic perovskite (CsPbX , X = Br, Cl) quantum dots (QDs) are replaced with halide-ion-pair ligands. Green and blue light-emitting diodes made from the halide-ion-pair-capped quantum dots exhibit high external quantum efficiencies compared with the untreated QDs.

No abstract

Although halide perovskite nanocrystals (NCs) are promising materials for optoelectronic devices, they suffer severely from chemical and phase instabilities. Moreover, the common capping ligands like oleic acid and oleylamine that encapsulate the NCs will form an insulating layer, precluding their utility in optoelectronic devices. To overcome these limitations, we develop a postsynthesis passivation process for CsPbI NCs by using a bidentate ligand, namely 2,2'-iminodibenzoic acid. Our passivated NCs exhibit narrow red photoluminescence with exceptional quantum yield (close to unity) and substantially improved stability. The passivated NCs enabled us to realize red light-emitting diodes (LEDs) with 5.02% external quantum efficiency and 748 cd/m luminance, surpassing by far LEDs made from the nonpassivated NCs.

A visible light responsive plasmonic photocatalytic composite material is designed by rationally selecting Au nanocrystals and assembling them with the TiO(2)-based photonic crystal substrate. The selection of the Au nanocrystals is so that their surface plasmonic resonance (SPR) wavelength matches the photonic band gap of the photonic crystal and thus that the SPR of the Au receives remarkable assistance from the photonic crystal substrate. The design of the composite material is expected to significantly increase the Au SPR intensity and consequently boost the hot electron injection from the Au nanocrystals into the conduction band of TiO(2), leading to a considerably enhanced water splitting performance of the material under visible light. A proof-of-concept example is provided by assembling 20 nm Au nanocrystals, with a SPR peak at 556 nm, onto the photonic crystal which is seamlessly connected on TiO(2) nanotube array. Under visible light illumination (>420 nm), the designed material produced a photocurrent density of ~150 μA cm(-2), which is the highest value ever reported in any plasmonic Au/TiO(2) system under visible light irradiation due to the photonic crystal-assisted SPR. This work contributes to the rational design of the visible light responsive plasmonic photocatalytic composite material based on wide band gap metal oxides for photoelectrochemical applications.

Two-dimensional Ti2CT x MXene nanosheets were prepared by the selective etching of Al layer from Ti2AlC MAX phase using HF treatment. The MXene sheets retained the hexagonal symmetry of the parent Ti2AlC MAX phase. Effect of the postetch annealing ambient (Ar, N2, N2/H2, and air) on the structure and electrochemical properties of the MXene nanosheets was investigated in detail. After annealing in air, the MXene sheets exhibited variations in structure, morphology, and electrochemical properties as compared to HF treated MAX phase. In contrast, samples annealed in Ar, N2, and N2/H2 ambient retained their original morphology. However, a significant improvement in the supercapacitor performance is observed upon heat treatment in Ar, N2, and N2/H2 ambients. When used in symmetric two-electrode configuration, the MXene sample annealed in N2/H2 atmosphere exhibited the best capacitive performance with specific capacitance value (51 F/g at 1A/g) and high rate performance (86%). This improvement in the electrochemical performance of annealed samples is attributed to highest carbon content, and lowest fluorine content on the surface of the sample upon annealing, while retaining the original two-dimensional layered morphology and providing maximum access of aqueous electrolyte to the electrodes.