Abstract. The transportation sector is the biggest contributor to air pollution in Indonesia, especially in metropolitan cities. Gases such as oxides of nitrogen (NO x ) are produced during the combustion of fossil fuels in the internal combustion of vehicle engines. Oxides of nitrogen such as nitric oxide (NO) and nitrogen dioxide (NO 2 ) are important air pollutants, because they cause significant harm to human health and play an important role in being precursors of other dangerous pollutants such as photochemical smog. One of the simple ways to reduce NO x concentrations is utilizing a catalytic process involving UV light and semiconductor particles such as TiO 2 . Illuminated TiO 2 UV light is capable of producing an electron (e -) and hole (h -) pair, which initiates a chemical reaction that alters the NO x to become NO 3 -or NO 2 -. A field scale paving block reactor coated with TiO 2 placed by the roadside was exposed to UV light using various exposure times. The results showed that the sample with a composition of 200 g/m 2 TiO 2 was capable of adsorbing NO x gas at an average rate of 0.0046 mg/m 2 /minute. Additional costs due to TiO 2 coating for every square meter of paving are IDR 13,180.
Bioetanol adalah bahan bakar alternatif yang sedang dikembangkan di dunia. Bioetanol memiliki beberapa keuntungan dalam penggunaannya sebagai bahan bakar selain karena sifatnya yang terbarukan bioetanol juga dipercaya dapat menurunkan beberapa emisi kendaraan bermotor. Bioetanol memiliki kelebihan dibandingkan dengan bensin yaitu bilangan oktan yang lebih tinggi. Maksud dan tujuan penelitian ini adalah untuk mengetahui pengaruh penggunaan campuran bioetanol pada emisi gas pada motor 2 langkah dengan variasi putaran mesin dan gigi. Metode pengujian ini dilakukan pada saat keadaan terbebani dan tidak terbebani (idle) dengan parameter pengukuran HC, CO, dan CO 2. Pengujian terhadap kendaraan motor dilakukan sebanyak 3 variasi yaitu : uji emisi bahan bakar bensin murni (BE0), uji emisi bahan bakar bioetanol 5% (BE5), dan uji emisi bahan bakar bioetanol 10% (BE10). Dari hasil pengujian diketahui bahwa bioetanol tidak dapat menurunkan emisi gas buang secara keseluruhan. Penambahan bahan bakar bioetanol juga dapat meningkatkan nilai bilangan oktan (RON) dan berat jenis pada campuran bahan bakar. Penambahan bioetanol meningkatkan emisi HC sebanyak 30,65% untuk BE5 dan 188,71% untuk BE10 pada variasi rpm, dan untuk variasi gear 35,54% untuk BE5 dan 221,79% untuk BE10. Sedangkan emisi CO untuk variasi rpm menurun sebanyak 3,7% untuk BE5 dan 14,82% untuk BE10, sedangkan pada variasi gear menurun 18,75% untuk BE5 dan 43,75% untuk BE10. Sementara itu CO 2 cenderung menurun pada variasi rpm sebanyak 9% untuk BE5 dan 18% untuk BE10 sedangkan untuk variasi gear terjadi penurunan konsentrasi sebanyak 10% untuk BE5 dan 20,12% untuk BE10.
Formaldehida memiliki rumus molekul HCHO dan memiliki berat molekul sebesar 30 g/mol. Formaldehida diproduksi secara tidak langsung oleh oksidasi fotokimia dari hidrokarbon atau dari prekursor formaldehida yang lain yang dihasilkan dari proses pembakaran. Pada penelitian ini pemantauan menggunakan metode aktif dengan metode Colorimetri. Prinsip dari metode ini adalah formaldehida diudara dialirkan kedalam sebuah tabung yang berisi larutan asam kromotopik. Formaldehida diudara akan bereaksi dengan asam kromotopik dan akan membentuk larutan monokationik kromogen yang berwarna ungu. Selanjutnya intensitas warna akan diukur pada spektrofotometer dengan panjang gelombang 580nm. Pengukuran formaldehida dilakukan untuk menganalisa hubungan konsentrasi formaldehida dengan oksidan, ozon, dan faktor meteorologi. Pengukuran konsentrasi formaldehida di Jakarta dilakukan di Bundaran Hotel Indonesia di Jl. M.H. Thamrin, Jakarta Pusat. Dari penelitian ini didapatkan bahwa ketika konsentrasi oksidan naik, maka konsentrasi formaldehida akan cenderung naik juga dengan angka Pearson Correlation 0,678 (p = 0,000). Konsentrasi ozon pada udara ambien juga berpengaruh dalam konsentrasi formaldehida di udara ambien. Rasio rata-rata dari konsentrasi formaldehida dalam oksidan didapatkan sebesar 21,22%. Selain dari gas oksidan dan ozon, pembentukan formaldehida juga dipengaruhi oleh beberapa faktor meteorologi seperti intensitas sinar matahari. Menurut Haagen-Smit (1952) sinar matahari akan membantu hidrokarbon untuk bereaksi dengan Nox untuk membentuk ozon dan formaldehida melalui reaksi fotokimia. Hasil Pearson Correlation menunjukkan bahwa ada hubungan yang cukup kuat antara intensitas matahari dengan formaldehida dengan R = 0,648 (p = 0,000).
Nitrogen dioksida merupakan gas polutan yang cukup penting. Sumber utama nitrogen dioksida adalah emisi kendaraan bermotor dan proses pembakaran di industri. NO 2 merupakan polutan penyebab hujan asam dan dapat menyebabkan kerusakan paru-paru kronis pada konsentrasi yang tinggi. Untuk mengantisipasi hal tersebut, diperlukan adanya pemantauan kualitas udara terhadap konsentrasi NO 2 di udara ambien. Salah satu metode pemantauan yang dapat dilakukan adalah metode pasif menggunakan sampler pasif. Sampler pasif yang digunakan pada penelitian ini diproduksi oleh Gradko Company, Inggris. Untuk pengukuran di dalam negeri, koefisien difusi yang digunakan perlu dihitung ulang, dikoreksi dan disesuaikan dengan kondisi lingkungan di Indonesia terutama dari segi temperatur dan kelembaban yang cukup berbeda dengan luar negeri. Penelitian dilakukan dalam sebuah lingkungan terkontrol berbentuk reaktor tertutup, yang dilengkapi dengan pengatur temperatur, kelembaban, kecepatan angin, dan konsentrasi gas polutan. Sebelum digunakan, sampler perlu dibersihkan terlebih dahulu dari senyawa-senyawa pengganggu seperti SO 2 , Nitrit, dan PAN (Peroxyacetil Nitrate). Hasil dari penelitian menunjukkan bahwa rerata temperatur sebesar 26,14 0 C menghasilkan perubahan pada laju pengambilan tube sampler sebesar 3,167% dan konsentrasi NO 2 sebesar 131,2 µg/m³. Hasil konsentrasi ini memiliki akurasi sebesar 14,62 % jika dibandingkan dengan metode aktif manual. Data dengan akurasi kurang dari 25% terhadap metode acuan dapat dikatakan akurat, sehingga koefisien difusi yang digunakan dalam perhitungan tidak perlu dikoreksi. Secara keseluruhan, pengaruh temperatur terhadap performansi tube sampler di Indonesia tidak begitu signifikan karena Indonesia berada di zona tropis dan tidak mengalami temperatur ekstrim tinggi dan ekstrim rendah.
Phase change material has been used as secondary refrigerant mixing ingredients to reduce energy consumption. Salt hydrate from calcium chloride with the composition of 55% calcium chloride dihydrate and 45% water matched with the temperature of chiller evaporator. Flow of slurry has given effect on the flow and heat transfer characteristics. Equipment used to know this is double pipe heat exchanger with flow counter flow. Pipe material is copper. The test results showed that the temperature salt hydrate containing solid particles. Salt hydrate slurry can improve the heat transfer coefficient, but the pressure drop and friction factor was also increased.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.