Methane is the main constituent of natural gas and can be converted in higher value‐added products for electricity cogeneration. It could be used as a solid membrane reactor (SMR) for application in Alkaline Anion‐Exchange Membrane Fuel Cell (AAEMFC). The investigation for the conversion of methane was based on sodium borohydride (NaBH4) method using Pt/C Basf, Pd/C, Ni/C as catalysts. The electrocatalysts were prepared with 20 wt% of metals loading on carbon. The X‐ray diffraction (XRD) analysis revealed a face‐centered cubic structure (FCC) for Pt/C and Pd/C catalysts, was observed Ni/NiO phases for Ni/C electrocatalyst. The Transmission Electron Microscopy (TEM) exhibited a good dispersion of nanoparticles and some agglomerations on the support, with a mean size of 6.4 nm for Pd/C, 5.7 nm for Ni/C and near to 2 nm size for Pt/C. The experiments with AAEMFC showed that all materials can carry out the reaction spontaneously. Pt/C catalyst presents energy density higher than the other materials. FTIR data suggest that methane was converted into small products organic molecules such as methanol and formate in different potentials for Pt/C, Pd/C, and Ni/C. The products were quantified by Raman spectroscopy. The high conversion efficiency obtained was about 20% at 0.3 V using Pt/C catalyst, the maximum conversion over Pd/C was 17.5% at 0.15 V, associated with the formation of a thin layer of PdO on the catalytic surface. The highest conversion rate (13%) was observed in closed circuit potentials to the short circuit in the cell with Ni/C catalyst. The results suggest that for the selective conversion of methane to methanol are most promising using materials containing Pt or Pd.
In this work, standard dilution analysis (SDA) is combined with microwave-induced plasma optical emission spectrometry (MIP OES) to determine seven elements in coffee, green tea, energy drink, beer, whiskey and cachaça (Brazilian hard liquor). No sample preparation other than simple dilution in HNO3 1% v v(-1) is required. Due to relatively low plasma temperatures, matrix effects may compromise accuracies in MIP OES analyzes of complex samples. The method of standard additions (SA) offers enhanced accuracies, but is time-consuming and labor intensive. SDA offers a simpler, faster approach, with improved accuracies for complex matrices. In this work, SDA's efficiency is evaluated by spike experiments, and the results are compared to the traditional methods of external calibration (EC), internal standard (IS), and standard additions (SA). SDA is comparable to the traditional calibration methods, and it provides superior accuracies for applications involving ethanol-containing beverage samples. The SDA-MIP OES procedure is effective. Using only two calibration solutions, it may be easily automated for accurate and high sample throughput routine applications.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.