No abstract

We demonstrate a one-pot hydrothermal cohydrolysis-carbonization process using glucose and iron nitrate as starting materials for the fabrication of carbonaceous spheres embedded with iron oxide nanoparticles. It is verified by TEM, (57)Fe Mossbauer, and Fe K-edge XAS that iron oxide nanoparticles are highly dispersed in the carbonaceous spheres, leading to a unique microstructure. A formation mechanism is also proposed. This route is also applicable to a range of other naturally occurring saccharides and metal nitrates. A catalytic study revealed the remarkable stability and selectivity of the reduced Fe(x)O(y)@C spheres in the Fischer-Tropsch synthesis, which clearly exemplifies the promising application of such materials.

The organization of different nano objects with tunable sizes, morphologies, and functions into integrated nanostructures is critical to the development of novel nanosystems that display high performances in sensing, catalysis, and so on. Herein, using acetylacetone as a chelating agent, phenolic resol as a carbon source, metal nitrates as metal sources, and amphiphilic copolymers as a template, we demonstrate a chelate-assisted multicomponent coassembly method to synthesize ordered mesoporous carbon with uniform metal-containing nanoparticles. The obtained nanocomposites have a 2-D hexagonally arranged pore structure, uniform pore size (~4.0 nm), high surface area (~500 m(2)/g), moderate pore volume (~0.30 cm(3)/g), uniform and highly dispersed Fe(2)O(3) nanoparticles, and constant Fe(2)O(3) contents around 10 wt %. By adjusting acetylacetone amount, the size of Fe(2)O(3) nanoparticles is readily tunable from 8.3 to 22.1 nm. More importantly, it is found that the metal-containing nanoparticles are partially embedded in the carbon framework with the remaining part exposed in the mesopore channels. This unique semiexposure structure not only provides an excellent confinement effect and exposed surface for catalysis but also helps to tightly trap the nanoparticles and prevent aggregating during catalysis. Fischer-Tropsch synthesis results show that as the size of iron nanoparticles decreases, the mesoporous Fe-carbon nanocomposites exhibit significantly improved catalytic performances with C(5+) selectivity up to 68%, much better than any reported promoter-free Fe-based catalysts due to the unique semiexposure morphology of metal-containing nanoparticles confined in the mesoporous carbon matrix.

Amorphous alloys structurally deviate from crystalline materials in that they possess unique short-range ordered and long-range disordered atomic arrangement. They are important catalytic materials due to their unique chemical and structural properties including broadly adjustable composition, structural homogeneity, and high concentration of coordinatively unsaturated sites. As chemically reduced metal-metalloid amorphous alloys exhibit excellent catalytic performance in applications such as efficient chemical production, energy conversion, and environmental remediation, there is an intense surge in interest in using them as catalytic materials. This critical review summarizes the progress in the study of the metal-metalloid amorphous alloy catalysts, mainly in recent decades, with special focus on their synthetic strategies and catalytic applications in petrochemical, fine chemical, energy, and environmental relevant reactions. The review is intended to be a valuable resource to researchers interested in these exciting catalytic materials. We concluded the review with some perspectives on the challenges and opportunities about the future developments of metal-metalloid amorphous alloy catalysts.

Zeolite analcime with a core-shell and hollow icositetrahedron architecture was prepared by a one-pot hydrothermal route in the presence of ethylamine and Raney Ni. Detailed investigations on samples at different preparation stages revealed that the growth of the complex single crystalline geometrical structure did not follow the classic crystal growth route, i.e., a crystal with a highly symmetric morphology (such as polyhedra) is normally developed by attachment of atoms or ions to a nucleus. A reversed crystal growth process through oriented aggregation of nanocrystallites and surface recrystallization was observed. The whole process can be described by the following four successive steps. (1) Primary analcime nanoplatelets undergo oriented aggregation to yield discus-shaped particles. (2) These disci further assemble into polycrystalline microspheres. (3) The relatively large platelets grow into nanorods by consuming the smaller ones, and meanwhile, the surface of the microspheres recrystallizes into a thin single crystalline icositetrahedral shell via Ostwald ripening. (4) Recrystallization continues from the surface to the core at the expense of the nanorods, and the thickness of the monocrystalline shell keeps on increasing until all the nanorods are consumed, leading to hollow single crystalline analcime icositetrahedra. The present work adds new useful information for the understanding of the principles of zeolite growth.

e-Iron carbide has been predicted to be promising for low-temperature Fischer-Tropsch synthesis (LTFTS) targeting liquid fuel production. However, directional carbidation of metallic iron to e-iron carbide is challenging due to kinetic hindrance. Here we show how rapidly quenched skeletal iron featuring nanocrystalline dimensions, low coordination number and an expanded lattice may solve this problem. We find that the carbidation of rapidly quenched skeletal iron occurs readily in situ during LTFTS at 423-473 K, giving an e-iron carbidedominant catalyst that exhibits superior activity to literature iron and cobalt catalysts, and comparable to more expensive noble ruthenium catalyst, coupled with high selectivity to liquid fuels and robustness without the aid of electronic or structural promoters. This finding may permit the development of an advanced energy-efficient and clean fuel-oriented FTS process on the basis of a cost-effective iron catalyst.

Fischer–Tropsch synthesis to lower olefins (FTO) opens up a compact and economical way to the production of lower olefin directly from syngas (CO and H2) derived from natural gas, coal, or renewable biomass. The present work is dedicated to a systematic study on the effect of K in the reduced graphene oxide (rGO) supported iron catalysts on the catalytic performance in FTO. It is revealed that the activity, expressed as moles of CO converted to hydrocarbons per gram Fe per second (iron time yield to hydrocarbons, termed as FTY), increased first with the content of K, passed through a maximum at 646 μmolCO gFe –1 s–1 over the FeK1/rGO catalyst, and then decreased at higher K contents. Unlike the evolution of the activity, the selectivity to lower olefins increased steadily with K, giving the highest selectivity to lower olefins of 68% and an olefin/paraffin (O/P) ratio of 11 in the C2–C4 hydrocarbons over the FeK2/rGO catalyst. The volcanic evolution of the activity is attributed to the interplay among the positive effect of K on the formation of Hägg carbide, the active phase for FTO, and the negative roles of K in increasing the size of Hägg carbide at high content and blocking the active phase by K-induced carbon deposition. The monotonic increase in the selectivity to lower olefins is ascribed to the improved chain-growth ability and surface CO/H2 ratio in the presence of K, which favorably suppressed the unwanted CH4 production and secondary hydrogenation of lower olefins.

The chemical binding of pyridine on Si(100) has been studied using thermal desorption spectroscopy (TDS), X-ray phototelectron spectroscopy (XPS), high-resolution electron energy loss spectroscopy (HREELS), and DFT theoretical calculations. XPS results show two chemisorption states of pyridine with N 1s binding energies at 398.8 and 401.8 eV, attributable to the [4+2]-like cycloadduct with two σ-linkages of Si-N 1 and Si-C 4 , and the dative-bonded pyridine through the lone pair electrons of its N atom, respectively. These observations were further confirmed in our vibrational studies. The formation of a dative bond between pyridine and Si(100) demonstrates a new approach for the chemical attachment of unsaturated organic molecules on the Si surface. The 1,4-dihydropyridine-like cycloadduct formed at 350 K can be considered as a template for further modification and functionalization of Si surfaces or as an intermediate for syntheses in a vacuum.