Pengujian getaran terhadap head expander telah dilaksanakan. Pengujian ini bertujuan untuk mengetahui karakteristik dinamis dari head expander yang digunakan pada Laboratorium Uji Suhu dan Vibrasi Pusat Teknologi Penerbangan-LAPAN. Head expander digunakan sebagai alat bantu pengujian untuk kebutuhan benda uji yang besar. Validasi head expander melalui metode eksperimental ini bertujuan untuk mengetahui tingkat homogenitas head expander. Pengambilan data menggunakan 4 buah akselerometer yang ditempatkan pada setiap ujung head expander. Getaran sine sweep diberikan mulai dari 5 Hz sampai 2000 Hz dengan amplitude konstan sebesar 1g dan sweep rate sebesar 1 octave/minute. Hasil pengujian menunjukkan bahwa head expander memiliki sifat homogen dengan nilai frekuensi alami yang tidak berbeda jauh.
Material Komposit Sandwich adalah jenis komposit yang terdiri dari susunan komposit laminate dengan core didalamnya. Pemanfaatan komposit sandwich saat ini sangat luas termasuk salah satunya sebagai struktur sekunder dalam pesawat mengingat masa komposit jenis ini lebih ringan dibandingkan komposit dengan full laminate. Salah satu pemanfaatanya adalah dalam pembuatan kompartemen float. Penggunaan komposit sebagai bahan kompartemen float perlu diketahui karakteristik dinamisnya. Dalam penelitian ini sampel yang digunakan dibuat dengan metode Vacuum Assisted Resin Infusion (VARI). Variasi sampel komposit akan diambil data karakteristik dinamik nya berupa damping factor dan natural frekuensinya sebagai acuan awal pemilihan komposisi material. Sampel uji yang digunakan berukuran 50x230mm dengan metode pengujian menggunakan metode Oberst. Profil getaran yang digunakan untuk pengujian adalah jenis sapuan sinus dari 10Hz sampai 2000Hz. Hasil pengujian menunjukkan bahwa sampel 3C3 memiliki Frekuensi natural yang lebih tinggi dibandingkan dengan sampel 2C2 namun memiliki nilai Damping properties yang lebih rendah. Hasil ini menunjukkan bahwa sampel 3C3 memiliki nilai kekakuan yang lebih tinggi dibandingkan 2C2. Dari hasil juga memperlihatkan bahwa sampel 2C2 memiliki kemampuan redaman yang lebih baik dibanding sampel 3C3. Pemilihan material berdasarkan hasil pengujian menunjukkan bahwa 2C2 memiliki keunggulan damping ratio dibandingkan 3C3 namun masih diperlukan lebih banyak variasi lagi untuk mendapatkan komposisi material terbaiknya.
Vibration testing on telemetry system payload is needed to determine its resistance to vibration during operation. Vibration testing of telemetry system payloads requires a test fixture. Test fixture is used to transmit vibration from shaker to telemetry system payload. The payload of telemetry system to be tested is a tubular. The test fixture in this study was designed using SolidWorks software. The material used for manufacture of test fixture is aluminum. Aluminum material was chosen because it has good rigidity with a relatively light mass. Stiffness and mass properties affect to natural frequency value of test fixture, which must be greater than the frequency range of operating telemetry system. Data collection uses two accelerometers placed on test fixture. Sine sweep vibrations are given from 5 Hz to 2000 Hz with a constant amplitude of 1 g and a sweep rate of 1 octave/minute. The test produces three peaks that they are candidates as natural frequencies, i.e at a frequency of 1532 Hz with an amplitude of 2.898 g, a frequency of 1706 Hz with an amplitude of 6.582 g, and at a frequency of 1806 Hz with an amplitude of 6.472 g. From those three natural frequencies, the second natural frequency at 1706 Hz is the most critically because it has the largest response value.
Fixture uji vibrasi harus dapat memegang device under test (DUT) selama proses pengujian dan sesuai dengan kondisi aslinya. Umumnya fixture uji vibrasi yang dibuat harus sesuai dengan geometri DUT. Oleh karena fixture uji vibrasi dibuat secara khusus untuk DUT tertentu, maka hal ini membuat proses uji vibrasi menjadi panjang alurnya dan lama pelaksanaannya. Selain itu, hal tersebut juga menyebabkan tingginya biaya untuk pembuatan fixture baru. Salah satu solusi dari masalah ini adalah dengan membuat fixture uji vibrasi yang bersifat universal. Fixture uji vibrasi yang bersifat universal dirancang mampu digunakan untuk hampir semua bentuk DUT. Fixture tersebut akan digunakan pada pengujian kategori S standar DO-160G section vibrasi yang memiliki rentang pengujian 5-500 Hz sehingga harus memiliki frekuensi natural di atas 500 Hz. Dalam studi ini dilakukan analisis sebuah rancangan fixture uji vibrasi yang bersifat universal mengunakan metode elemen hingga. Analisis dilakukan untuk fixture uji vibrasi universal berukuran 600 mm x 600 mm menggunakan metode analisis modal dan harmonik pada rentang frekuensi 5 Hz - 2000 Hz, kemudian dilakukan analisis kemampuan aktual sistem uji vibrasi berdasarkan massa fixture. Dua jenis material yaitu paduan aluminium dan paduan magnesium digunakan dalam studi ini. Hasil studi menunjukkan bahwa performa fixture yang menggunakan material Al 6061 tidak jauh berbeda dengan material Mg. Frekuensi natural yang diperoleh untuk fixture bermaterial Al 6061 adalah 975.94 Hz sedangkan untuk material paduan Mg adalah 996.88 Hz dengan selisih sebesar 2.14%, keduanya memenuhi kebutuhan pengujian vibrasi DO-160G kategori S. Analisis harmonik menghasilkan perbedaan amplitudo respon yang tidak signifikan yaitu di bawah 0.6‰. Fixture bermaterial logam paduan Mg lebih ringan daripada material Al 6061 sehingga menghasilkan kemampuan aktual sistem uji vibrasi yang lebih tinggi. Logam paduan Mg dipilih menjadi kandidat utama material fixture uji vibrasi universal yang akan dimanufaktur karena mampu menghasilkan kemampuan aktual sistem uji vibrasi yang lebih tinggi.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.