This paper presents a road distress detection system involving the phases needed to properly deal with fully automatic road distress assessment. A vehicle equipped with line scan cameras, laser illumination and acquisition HW-SW is used to storage the digital images that will be further processed to identify road cracks. Pre-processing is firstly carried out to both smooth the texture and enhance the linear features. Non-crack features detection is then applied to mask areas of the images with joints, sealed cracks and white painting, that usually generate false positive cracking. A seed-based approach is proposed to deal with road crack detection, combining Multiple Directional Non-Minimum Suppression (MDNMS) with a symmetry check. Seeds are linked by computing the paths with the lowest cost that meet the symmetry restrictions. The whole detection process involves the use of several parameters. A correct setting becomes essential to get optimal results without manual intervention. A fully automatic approach by means of a linear SVM-based classifier ensemble able to distinguish between up to 10 different types of pavement that appear in the Spanish roads is proposed. The optimal feature vector includes different texture-based features. The parameters are then tuned depending on the output provided by the classifier. Regarding non-crack features detection, results show that the introduction of such module reduces the impact of false positives due to non-crack features up to a factor of 2. In addition, the observed performance of the crack detection system is significantly boosted by adapting the parameters to the type of pavement.

This paper presents a non-intrusive approach for monitoring driver drowsiness, based on driver and driving data fusion. The Percentage of Eye Closure (PERCLOS) is used to estimate the driver's state. The PERCLOS is computed on real time using a stereo vision-based system. The driving information used is the lateral position, the steering wheel angle and the heading error provided by the CAN bus. These three signals have been studied in the time and frequency domain. A multilayer perceptron neural network has been trained to fetch an optimal performance score. This system was installed in a naturalistic driving simulator. For evaluation purposes, several experiments were designed by psychologists and carried out with professional drivers. As ground truth, subjective experts' manual annotation of the driver video sequences and driving signals was used. A detection rate of 70% using individual indicators was raised up to 94% with the combination of indicators. An explanation about these results and some conclusion are presented.

Abstract-Computer vision techniques applied to systems used on road maintenance, which are related either to traffic signs or to the road itself, are playing a major role in many countries because of the higher investment on public works of this kind. These systems are able to collect a wide range of information automatically and quickly, with the aim of improving road safety. In this context, the correct visibility of traffic signs and panels is vital for the safety of drivers. This paper describes an approach to the VISUAL Inspection of Signs and panEls ("VISUALISE"), which is an automatic inspection system, mounted onboard a vehicle, which performs inspection tasks at conventional driving speeds. VISUALISE allows for an improvement in the awareness of the road signaling state, supporting planning and decision making on the administration's and infrastructure operators' side. A description of the main computer vision techniques and some experimental results obtained from thousands of kilometers are presented. Finally, the conclusions of the system are described.

Abstract-Collision avoidance is one of the most difficult and challenging automatic driving operations in the domain of intelligent vehicles. In emergency situations, human drivers are more likely to brake than to steer, although the optimal maneuver would, more frequently, be steering alone. This statement suggests the use of automatic steering as a promising solution to avoid accidents in the future. The objective of this paper is to provide a collision avoidance system (CAS) for autonomous vehicles, focusing on pedestrian collision avoidance. The detection component involves a stereo-vision-based pedestrian detection system that provides suitable measurements of the time to collision. The collision avoidance maneuver is performed using fuzzy controllers for the actuators that mimic human behavior and reactions, along with a high-precision Global Positioning System (GPS), which provides the information needed for the autonomous navigation. The proposed system is evaluated in two steps. First, drivers' behavior and sensor accuracy are studied in experiments carried out by manual driving. This study will be used to define the parameters of the second step, in which automatic pedestrian collision avoidance is carried out at speeds of up to 30 km/h. The performed field tests provided encouraging results and proved the viability of the proposed approach.

Abstract-This paper describes an improved stereovision system for the anticipated detection of car-to-pedestrian accidents. An improvement of the previous versions of the pedestrian-detection system is achieved by compensation of the camera's pitch angle, since it results in higher accuracy in the location of the ground plane and more accurate depth measurements. The system has been mounted on two different prototype cars, and several real collision-avoidance and collision-mitigation experiments have been carried out in private circuits using actors and dummies, which represents one of the main contributions of this paper. Collision avoidance is carried out by means of deceleration strategies whenever the accident is avoidable. Likewise, collision mitigation is accomplished by triggering an active hood system.