Abstract:We present a review of recent developments in THz coherent systems based on photonic local oscillators. We show that such techniques can enable the creation of highly coherent, thus highly sensitive, systems for frequencies ranging from 100 GHz to 5 THz, within an energy efficient integrated platform. We suggest that such systems could enable the THz spectrum to realize its full applications potential. To demonstrate how photonics-enabled THz systems can be realized, we review the performance of key components, show recent demonstrations of integrated platforms, and give examples of applications. References and links1. A. G. Davies and E. H. Linfield, eds., "Special Supplement: THz Technology," Electron. Lett. 46(26), (2010). 2. S. J. Savory, "Digital filters for coherent optical receivers," Opt. Express 16(2), 804-817 (2008). 3. H. Eisele, "480GHz oscillator with an InP Gunn device," Electron. Lett. 46(6), 422-423 (2010). 4. L. Moeller, J. Federici, and K. Su, "THz wireless communications: 2.5 Gb/s error-free transmission at 625 GHz using a narrow-bandwidth 1 mW THz source," XXXth URSI General Assembly and Scientific Symposium (2011). 5. C. C. Renaud, M. Robertson, D. Rogers, R. Firth, P. J. Cannard, R. Moore, and A. J. Seeds, "A high responsivity, broadband waveguide uni-travelling carrier photodiode," Proc. SPIE 61940, 61940C, 61940C-8 (2006

We have modelled the experimental system based on the sub-wavelength aperture probe employed in our previous work for terahertz (THz) surface plasmon wave imaging on a bowtie antenna. For the first time we demonstrate the accuracy of the proposed interpretation of the images mapped by the probe. The very good agreement between numerical and experimental results proves that the physical quantity detected by the probe is the spatial derivative of the electric field normal component. The achieved understanding of the near-field probe response allows now a correct interpretation of the images and the distribution of the electric field to be extracted. We have also carried out the first assessment of the probe invasiveness and found that the pattern of the surface plasmon wave on the antenna is not modified significantly by the proximity of the probe. This makes the experimental system an effective tool for near-field imaging of THz antennas and other metallic structures.

No abstract

We present a comprehensive study of uni-travelling carrier photodiode impedance and frequency photo-response supported by measurements up to 110 GHz. The results of this investigation provide valuable new information for the optimisation of the coupling efficiency between UTC-PDs and THz antennas. We show that the measured impedance cannot be explained employing the standard junction-capacitance/series-resistance concept and propose a new model for the observed effects, which exhibits good agreement with the experimental data. The achieved knowledge of the photodiode impedance will allow the absolute level of power emitted by antenna integrated UTCs to be predicted and ultimately maximised.

No abstract

We report the first InGaAsP-based uni-travelling carrier photodiode structure grown by Solid Source Molecular Beam Epitaxy; the material contains layers of InGaAsP as thick as 300 nm and a 120 nm thick InGaAs absorber. Large area vertically illuminated test devices have been fabricated and characterised; the devices exhibited 0.1 A/W responsivity at 1550 nm, 12.5 GHz -3 dB bandwidth and -5.8 dBm output power at 10 GHz for a photocurrent of 4.8 mA. The use of Solid Source Molecular Beam Epitaxy enables the major issue associated with the unintentional diffusion of zinc in Metal Organic Vapour Phase Epitaxy to be overcome and gives the benefit of the superior control provided by MBE growth techniques without the costs and the risks of handling toxic gases of Gas Source Molecular Beam Epitaxy.

Impact of sub-wavelength-size dielectric particles on Zenneck surface waves on planar metallic antennas is investigated at terahertz (THz) frequencies with THz near-field probe microscopy. Perturbations of the surface waves show the particle presence, despite its sub-wavelength size. The experimental configuration, which utilizes excitation of surface waves at metallic edges, is suitable for THz imaging of dielectric sub-wavelength size objects. As a proof of concept, the effects of a small strontium titanate rectangular particle and a titanium dioxide sphere on the surface field of a bow-tie antenna are experimentally detected and verified using full-wave simulations.

Abstract:We report the first demonstration of a uni-traveling carrier photodiode (UTC-PD) used as a 5 Gbps wireless receiver. In this experiment, a 35.1 GHz carrier was electrically modulated with 5 Gbps non-return with zero on-off keying (NRZ-OOK) data and transmitted wirelessly over a distance of 1.3 m. At the receiver, a UTC-PD was used as an optically pumped mixer (OPM) to down-convert the received radio frequency (RF) signal to an intermediate frequency (IF) of 11.7 GHz, before it was down-converted to the baseband using an electronic mixer. The recovered data show a clear eye diagram, and a bit error rate (BER) of less than 10 −8 was measured. The conversion loss of the UTC-PD optoelectronic mixer has been measured at 22 dB. The frequency of the local oscillator (LO) used for the UTC-PD is defined by the frequency spacing between the two optical tones, which can be broadly tuneable offering the frequency agility of this photodiode-based receiver. References and links1. A. Ng'oma, "Radio-over-fiber techniques for millimeter wave wireless