In the last two decades, there has been observed a noticeable increase in the popularity and availability of air transport services, including regional ones. This intensive development of transport is accompanied by an increase in the adverse impact to the environment, increases noise level, and exhausts emissions, despite the modification and modernization of engines. Determining the emission for regional flights takes into account the specificity of the aircrafts design, such as the size of the aircraft and the performance of the engines. In this article, an attempt was made to determine the CO2 emissions of a business jet flying from Gdansk to Rzeszow. The methodology of the research (the method of calculating emissions based on fuel consumption) and the performance characteristics of the aircraft engines have been described. In the first part of the article, the speed-altitude characteristics of the DGEN-380 engine for different cruise parameters were determined using the virtual engine test bench WESTT CS/B. These characteristics have enabled the engine to match the flight characteristics (altitude, speed). For specific flight parameters, the thrust and fuel consumption were determined. On this basis, for the adopted trajectory and flight time of an aircraft equipped with two DGEN-380 engines, total fuel consumption and CO2 emission factors and values in CRUISE phase was determined with regard to the wind speed and direction. The obtained results were illustrated graphically and discussed.
Nowadays, air transport is in an intense development phase. In order to optimize air communication and make it even more economical and environmentally friendly, attempts are made to undertake such activities as, e.g., SESAR project, which aims to develop and implement a modern ATM system. One of the parts of this project is the research on minimizing fuel consumption and emissions of pollu-tants in the engine exhausts. In the paper there is therefore presented the methodology for determining emission of those pollutants for the longest stage of the flight – the cruise phase. First, the value of the thrust required for the flight of an exemplary aircraft was deter-mined, and then the values of the engines trust and specific fuel consumption were computed. Additionally, it was necessary to determine the Emission Indexes (EI) of CO, NOx, HC and CO2 for the cruise phase, based on known such indexes for the LTO. Total emissions of these pollutants for the mission adopted to conduct research – a 1000 km long cruise – were determined. These emissions were computed for the exemplary aircraft per one kilometre, as well as per one hour of flight for various cruising altitudes and flight speeds.
Among the most important problems currently faced by air transport, we can distinguish the adverse impact of aircrafts on the natu-ral environment, as well as the rising costs of transport. One of the possibilities to improve this situation is better adjustment of aircraft characteristics to the performed transport tasks, taking into account all the requirements and limitations that exist in air traffic and the adverse impact of air transport on the natural environment. It is reflected in the research tasks conducted under the SESAR program. The aspiration to minimize the adverse impact of aircrafts on the environment is executed, among others, through determining such trajectories that are characterized by minimal fuel consumption or minimal emission of harmful substances in the engines exhausts. These goals are corresponding with the research conducted and described in the paper. The main aim of the work was to analyse the impact of wind speed and direction on the emission of harmful substances of a jet aircraft performing a flight on a given route. For research purposes, the route between two Polish cities Gdansk and Rzeszow was considered. The distance between the two airports was divided into sections for which wind direction and strength were determined (read from the windy.com website). Next, the aircraft per-formance was determined and the fuel consumption and the amount of harmful compounds (CO2, NOx, CO and HC), emitted in the en-gines exhausts were determined for the route from Gdansk to Rzeszow (under favourable wind conditions) and on the return route – from Rzeszow to Gdansk (under unfavourable wind conditions). For comparative purposes, emission of these substances for windless condi-tions was also determined. The results are presented in tables and depicted in the graph, as well as discussed in the conclusions of the paper.
IntroductionNowadays, in civil aviation, issues related to improving efficiency, reducing the costs of air operations as well as the negative impact of air transport on the environment are of increasing importance. These ideas allow the formulation of the paradigm relating to the development of air transport – ‘more Efficiently, more Economically, more Eco-friendly – 3E’. The article presents in a cross-sectional and synthetic way research conducted by leading scientific centres around the world as well as prototype aviation constructions designed by companies from the aviation industry. Benefits and disadvantages of future propulsions, such as purely electric, hybrid and distributed propulsions, were presented. Conclusions were formulated regarding further possible directions of civil aviation development, taking into account the improvement of its efficiency as well as economic and ecological indicators.
The paper describes the selection of a distributed propulsion for the AOS H2 motor glider (selection of engines, their number, and propellers) and determination of its performance. This analysis is related to the research conducted on environment friendly and hybrid propulsions in various research centres. The main aim of the analyses conducted is to increase the performance of vehicles powered by electric motors. The batteries have a low density of energy, i.e. the ratio of mass to cumulated energy. Instead of a battery set, it is possible to apply a hybrid-electric system, where the combustion engine works as a generator or an electric-hydrogen generator, where the hydrogen cell supports a small set of batteries. One of such flying vehicles, fitting in this trend, is the AOS H2 motor glider built at the Rzeszow University of Technology in cooperation with other universities. It is a hybrid aircraft, equipped with a hydrogen cell, which together with a set of batteries is a source of electricity for the Emrax 268 electric motor. To increase the vehicle's performance (the range and flight duration), it is possible to use a distributed propulsion. This type of propulsion consists in placing many electric motors along the wingspan of the aircraft. Appropriate design of such a system (propeller diameters, engine power, number of engines) can improve the aerodynamic and performance parameters of the airframe. An analysis of the performance for the selected flight trajectory for this propulsion variant was conducted and compared to the performance of the AOS H2 motor glider equipped with traditional propulsion. The consumption of hydrogen was also determined for both systems. The results obtained were presented in the diagrams and discussed in the conclusions.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.