Ultra-high molecular weight polyethylene (UHMWPE) wear particles are the major cause of total joint replacement (TJR) failures because the wear particles, released from TJR's, cause bone loosening. To simplify the study of the relationship between numbers of particles at various locations around TJR's and extent of bone loosening at these locations, the authors of this work tried to develop a new method for easy and fast determination of number of wear particles. The method, called LSC (Light Scattering with Calibration spheres), is based on light scattering of a suspension of wear particles and calibration spheres, and yields relative numbers of particles. A modified LSC method, called LSCm, requires one additional experiment, a gravimetric analysis of a mixture of all studied samples, to determine absolute numbers of wear particles. LSC and LSCm methods are easy and fast, which make them suitable for processing and comparing high number of samples.

No abstract

There is a growing public interest in utilizing biomass and biomaterials to obtain products with high sustainability and less harm to the environment. This study reports on using electrospinning technique to produce nanofiber membranes based on homogeneous polymeric blends of gum Arabic, polyvinyl alcohol, and silver nanoparticles. The produced interconnected membranes were cross-linked via heat and plasma treatments, and the membranes were characterized for their chemical and physical characteristics. Fourier transform infrared spectroscopy shows a cross-linking of gum Arabic and polyvinyl alcohol through esterification during the heat treatment, and through graft polymerization with methyl groups after methane plasma treatment. The mechanical performance of the membranes showed an increase in the modulus of elasticity in the longitudinal direction (parallel to electrospun nanofibers) from 85 ± 4 MPa to 148 ± 5 MPa compared with the transverse direction. Also, well-dispersed nanoparticles in the spinning solution tend to increase the elasticity from 41 ± 3 MPa to 148 ± 5 MPa, while the agglomeration of these nanoparticles decreases the mechanical properties of the nanofibers. Results of the biodegradation tests confirmed the significant biodegradable nature of the produced nanofibers, where 99.09% of the material was degraded within 28 days. Moreover, samples showed significant bactericidal activity against Micrococcus luteus with significantly less-observed bacteria in the measured plate, while the inhibition zone for Escherichia coli was 1 cm. The produced biodegradable electrospun membranes have multiple potential applications in many fields; especially for medical, antibacterial, and food packaging. This work reports the results for moisture and oxygen transfer of the membranes as a proposed application in food wrapping.

No abstract

PMMA / PTFE optical fibers with increasing lateral emission were coated with titanium nanolayer using lowtemperature plasma. We investigated how this nanolayer affected the spectrum of emission when VIS LED and UVA LED light sources were used. Even though the FTIR analysis didn´t confirm the presence of TiO2 in the titanium nanolayer, the fibers exhibited significantly higher antibacterial properties compared to non-coated fibers. If we don´t assume that the titanium surface itself has antibacterial properties, the cause of this phenomenon is in the properties of the formed surface structure. Nevertheless, this treatment could extend the use of polymer optical fibers (POF) to new applications, such as illumination of infectious areas, for example, hospital corridors.