No abstract

Recently we presented a method for the assessment of in vivo forces on pectoral device implants motivated from technological and clinical advancements toward smaller implantable cardiac pacemakers and the altered structural demands arising from the reduced device size. Objective of this study was the investigation of the intra-species proportionality of in-line force and transverse reaction force of the Pectoralis major for the characterization of mechanical in vivo loadings on pectoral implants. Two Chacma baboons (23.9 ± 1.2 kg) received bilaterally one chronic and one acute pectoral sub-muscular instrumented pacemaker (IPM) implant. The Pectoralis major muscle was electrically stimulated and resulting in-line and transverse muscle force were measured. The correlation of in-line force and transverse force of the Pectoralis major was investigated using linear regression analyses. The proportionality of in-line and transverse force of the Pectoralis major was found to be subject-specific (R² = 0.17, p < 0.003). Including morphometric parameters, i.e., length along line of action, width over implant and stress, in the regression analysis provided a strong intra-species correlation between in-line and transverse force (R² = 0.71, p < 10⁻⁷). The novel intra-species correlation provides a tool toward the characterization of mechanical in vivo loading conditions of pectoral device implants.

No abstract

Because aortic occlusion is arguably one of the most dangerous aortic manipulation maneuvers during cardiac surgery in terms of perioperative ischemic neurological injury, the purpose of this investigation is to assess the structural mechanical impact resulting from the use of existing and newly proposed occluders. Existing (clinically used) occluders considered include different cross-clamps (CCs) and endo-aortic balloon occlusion (EABO). A novel occluder is also introduced, namely, constrained EABO (CEABO), which consists of applying a constrainer externally around the aorta when performing EABO. Computational solid mechanics are employed to investigate each occluder according to a comprehensive list of functional requirements. The potential of a state of occlusion is also considered for the first time. Three different constrainer designs are evaluated for CEABO. Although the CCs were responsible for the highest strains, largest deformation, and most inefficient increase of the occlusion potential, it remains the most stable, simplest, and cheapest occluder. The different CC hinge geometries resulted in poorer performance of CC used for minimally invasive procedures than conventional ones. CEABO with a profiled constrainer successfully addresses the EABO shortcomings of safety, stability, and positioning accuracy, while maintaining its complexities of operation (disadvantage) and yielding additional functionalities (advantage). Moreover, CEABO is able to achieve the previously unattainable potential to provide a clinically determinable state of occlusion. CEABO offers an attractive alternative to the shortcomings of existing occluders, with its design rooted in achieving the highest patient safety. Copyright © 2016 John Wiley & Sons, Ltd.

No abstract

No abstract

No abstract