Bacterial cellulose (BC) is cellulose produced by a few limited species of bacteria in given conditions. BC has many remarkable properties such as its high mechanical properties, water uptake ability and biocompatibility which makes it a very desirable material to be used for wound healing. Inherently due to these important properties, the material is very resistant to easy processing and thus difficult to produce into useful entities. Additionally, being rate limited by the dependency on bacterial production, high yield is difficult to obtain and thus secondary material processing is sought after. In this review, BC is explained in terms of synthesis, structure and properties. These beneficial properties are directly related to the material's great potential in wound healing where it has also been trialled commercially but ultimately failed due to processing issues. However, more recently there has been increased frequency in scientific work relating to BC processing into hybrid polymeric fibres using common laboratory fibre forming techniques such as electrospinning and pressurised gyration. This paper summarises current progress in BC fibre manufacturing, its downfalls and also gives a future perspective on how the landscape should change to allow BC to be utilised in wound care in the current environment.

No abstract

Alzheimer's disease (AD) is a progressive and irreversible neurodegenerative disease. Cholinesterase inhibitors (ChEIs) are commonly used for symptomatic treatment of neural transmission improvement in AD. Donepezil is a reversible and non-competitive ChEI which is clinically used for palliative treatment of AD. The aim of the present study was to investigate the destabilizing effect of donepezil loaded poly(lactic-co-glycolic acid)-block-poly (ethylene glycol) [PLGA-b-PEG] nanoparticles on fibril formation in vitro and the ability of these nanoparticles to cross blood brain barrier (BBB) using in vitro BBB model and the neuroprotective effects of free donepezil and donepezil loaded PLGA-b-PEG nanoparticles. Donepezil loaded PLGA-b-PEG nanoparticles were prepared with double emulsion method. Destabilizing effect of these donepezil loaded particles on the amyloid-beta fibril (Aβ and Aβ) formation was determined in vitro. Nanoparticles were found to have small particle size and have destabilizing effect on fibril formation. In vitro BBB model was successfully prepared. Nanoparticles showed the ability to cross the BBB and showed a controlled release profile in this system. IL-1β, IL-6, GM-CSF, TGF-β, MCP-1 and TNF-α levels were found to be increased in both gene and protein expression levels in astrocytes incubated with amyloid fibrils in in vitro BBB model suggesting an increased inflammation. Free donepezil and donepezil loaded nanoparticle administration caused a significant dose-dependent decrease in both gene and protein expression levels of IL-1β, IL-6, GM-CSF and TNF-α. No significant changes were observed for TGF-β and MCP-1.

Poly(glycerol sebacate) (PGS) was discovered in the previous decade and is a promising bioelastomer with tuneable mechanical, biodegradable and biocompatible properties.Despite of these superiorities, PGS possesses solubility and processability disadvantages. To overcome these drawbacks of PGS, blends could be formed with a polymer which is soluble in a common solvent with PGS prepolymer, having a melting temperature above the crosslinking temperature and which can be removed from the structure after crosslinking. In this study, PGS fibers were fabricated for the first time using pressurized gyration as scaffolds. Fibers were obtained through blending the synthesized PGS prepolymer with poly(vinyl alcohol) (PVA) to overcome solubility/melting drawbacks of crosslinked PGS polymer. Obtained fiber diameters have a narrow size distribution which did not change after thermal crosslinking. After the washing procedure, ~ 25% decrease in the average fiber diameter was observed due to the PVA removal. Resulting PGS fibers were characterized in terms of chemical structure, morphology, and cell viability. Fibroblast cell adhesion and spreading on three-dimensional fiber networks were determined by microscopy. PGS fibers supported cell adhesion and proliferation. After 7 days of cell-PGS fiber interactions, cell proliferation and spreading increased without any toxicity.

No abstract