Ceramic clays are among the most complicated of ceramic systems because of the very intricate relationship between the behavior of minerals during ceramic processing and their modifications during heating. A major challenge is to predict the phase changes in clay ceramics. The aims of this study were to establish reference data of ceramic products that can be formed based on the mineralogical compositions of the local raw materials. These data, in turn, can be compared with archeological ceramics in order to study their origins.The mineralogical compositions and modifications during firing (550–1100°C under oxidizing conditions) of seven clayey materials sampled from the main clay deposits of northern Morocco were evaluated by X-ray powder diffraction. Two groups of clays were distinguished according to the type of neoformed high-temperature minerals: non-calcareous clays and calcareous clays. For the non-calcareous raw materials, spinel was produced at 950°C. Cristobalite and mullite were formed at temperatures in excess of 1000°C from clays that contain illite, kaolinite, and chlorite. In clays containing vermiculite and large amounts of chlorite, hematite was formed at temperatures in excess of 950°C. Firing of calcareous clays at temperatures >950°C yielded Ca-silicates (diopside, gehlenite and wollastonite), spinel, cristobalite, hematite, and feldspars. Mullite may also form in the calcareous clay products when the carbonate content exceeds 10%.

This study focuses on the mineralogical and geotechnical characterization of northern Moroccan clays from the Tangier and Tetouan areas and compares them with the main clay deposits used in the Moroccan ceramic industry (from Meknes, Fes, Salé and Safi regions). Sampled clays were analysed by X-ray diffraction on bulk and clay (<2 μm) fractions to identify the mineralogical assemblages of the clay outcrops. Further analyses were conducted to determine the particle size distribution (laser diffraction particle analyser), the total organic matter content (Loss- On-Ignition measurements) and the Atterberg limits of the raw clays. The study aims at investigating the spatial variability of the clay samples and at evaluating their potential application as raw materials in the ceramic industry.Tetouan and Tangier clays are characterized by diversified mineralogical assemblages (in particular a variable proportion of clay, quartz and calcite) compared with the Meknes, Fes, Salé and Safi clays (high clay content, quartz and calcite). The clay fraction of the Tetouan and Tangier samples is dominated by illite and kaolinite with variable amounts of chlorite, smectite and/or vermiculite. Illite is the dominant phase in the Meknes, Fes, Safi and Salé clays, but is associated with kaolinite. No direct relationship between the mineral assemblage composition and the lithology of the series was found.The clays materials studied consist generally of fine particles with medium to high plasticity and low organic matter content. Due to their mineralogy, grain-size distribution and plasticity the clays appear to be suitable as raw material for the growing Morocco ceramic industry.

Turbidity currents and their deposits can be investigated using several methods, i.e. direct monitoring, physical and numerical modelling, sediment cores and outcrops. The present study focuses on thin clayey sand turbidites found in Lake Hazar (Turkey) occurring in eleven clusters of closely spaced This article is protected by copyright. All rights reserved.

The North Anatolian fault (NAF) in the Marmara Sea is a significant hazard for the city of Istanbul. The use of paleoseismological data to provide an accurate seismic risk assessment for the area is constrained by the fact that the NAF system is submarine; thus a history of paleoearthquakes can be inferred only by using marine sediment cores. Here, a record of turbidites was obtained in two cores and used to reconstruct the earthquake history along the Çınarcık segment, a main branch of the NAF. Klg04 was collected from a berm north of the fault, and Klg03 was positioned in the Çınarcık basin, south of the fault. The cores were correlated using long-term geochemical variations in the sediment, and turbidites deposited simultaneously at both sites were then identified. Radionuclide measurements suggest the most recent turbidite was triggered by the 1894 C.E. M w 7.3 earthquake. We conclude that the turbidites identified at both sites are earthquake generated, based on their particular sedimentological and geochemical signatures; the correlation of turbidites at berm and basin sites; and the match of the most recent turbidite with a nineteenth century historical earthquake. To date older turbidites, we used carbon-14 and paleomagnetic data to build an OxCal model with a local reservoir correction of 400 50 yr. The Çınarcık segment is found to have ruptured in 1509 C.E., sometime in the fourteenth century, in 989 C.E., and in 740 C.E., with a mean recurrence interval in the range of 256-321 years. Finally, we used the earthquake record obtained to review the rupture history of the adjacent segments over the past 1500 years.

International audienceThis study aims at evaluating the potential suitability of Tetouan and Meknes (central Morocco) clay material as raw materials in various ceramic applications by investigating their textural, chemical, thermal and firing characteristics. Textural properties were identified by specific surface area, cation exchange capacity (CEC) and bulk density (ρs). Chemical and thermal properties were assessed using XRF and TG/DTA techniques, respectively. Firing characteristics at temperatures from 800℃ to 1100℃ were determined by linear firing shrinkage, loss on weight and water absorption capacity. The Meknes clays are characterised by medium cation exchange capacity (CEC) and specific surface area (SSA) values due to their moderate smectite content. The Tetouan clays have medium to low CEC and medium SSA values. The main oxides in the clayey samples are SiO2 (35 - 54.3 wt%), Al2O3 (20.6 - 43.9 wt%), and Fe2O3 (9.7 - 22.4 wt%). The amount of CaO in Meknes clays ranges from 8 to 12 wt%, whereas CaO is only present in some Tetouan clay (TE4, TE7, TN4 and TN5). A significant densification of ceramic behaviour could be noticed for most of Tetouan clays at firing temperatures above 1000℃. Meknes clays show earlier densification from 800℃. The chemical, textural and ceramic properties of Tetouan and Meknes clays indicate their suitability as raw materials for the production of structural ceramics. The high amount of Fe2O3 in all clays makes them inappropriate in fine ceramics

Waste recycling with increasing the lifecycle of resource is a novel approach for enhancing circular economy. Within this context, this study aims to give a second life cycle to phosphogypsum (PG) waste, which is a byproduct from phosphoric acid manufacture, as useful resources. This study evaluates the sustainability of this harmful waste, which is accumulated in large stockpiles and becomes hazardous during storage, and to stabilize bentonite-based concrete intended for road construction. The effect of raw bentonite (Ca-Na montmorillonite), PG, and lime on the properties of cementitious materials has been investigated through various tests. The properties examined include chemistry (X-ray Fluorescence Spectrometry), mineralogy (X-ray Powder Diffraction and Fourier-Transform Infrared Spectroscopy), calorimetry (Differential Thermal Analysis/Thermogravimetry) and microstructure (Scanning Electron Microscopy) of the mortar based on different mixtures of bentonite, PG and lime. The result show that lime and PG addition involves in the formation of new nanocrystalline phases and the disappearance of certain minerals as portlandite. Calcium silicate hydrate gel appeared in the mixture with 8% of lime, whereas strätlingite was neoformed in the mixture with 8% of lime and 8% of PG. These nanocrystalline phases are responsible for enhancing mechanical strength through the pozzoloanic reaction.

AB ST R ACT : The Maastrichtian-Palaeogene series of the Western High Atlas and Meseta Basins in Morocco are particularly rich in palygorskite. The present work is aimed at clarifying the genesis of palygorskite from the interbedded facies and gaining an understanding of their relationships with the depositional environment. The mineralogical characteristics of palygorskite from these series were studied by X-ray diffraction (XRD) and electron microscopy (SEM/TEM). The palygorskite content and microstructure show large geographical and stratigraphical variations in the deposits studied. The palygorskite occurrence is directly related to palaeobathymetry, since it is the dominant clay mineral in shallow marine and restricted environments. According to the morphology of palygorskite crystallites, four types of textures were distinguished. These types of palygorskite are polygenetic, formed by chemical precipitation, by the recrystallization of smectite clays or reworked by wind or water from sub-aerial environments. The difference between the two studied sub-basins with respect to palygorskite occurrence is attributed to the palaeomorphology of the hinterlands, to the tectonic differentiation and to the physical-chemical conditions of seawater.

No abstract