The rupture forces of individual host-guest complexes between beta-cyclodextrin (beta-CD) heptathioether monolayers on Au(111) and several surface-confined guests were measured in aqueous medium by single molecule force spectroscopy using an atomic force microscope. Anilyl, toluidyl, tert-butylphenyl, and adamantylthiols (0.2-1%) were immobilized in mixed monolayers with 2-mercaptoethanol on gold-coated AFM tips. For all guests and for all surface coverages, the force-displacement curves measured between the functionalized tips and monolayers of beta-CD exhibited single, as well as multiple, pull-off events. The histograms of the pull-off forces showed several maxima at equidistant forces, with force quanta characteristic for each guest of 39 +/- 15, 45 +/- 15, 89 +/- 15, and 102 +/- 15 pN, respectively. These force quanta were independent of the loading rate, indicating that, because of the fast complexation/decomplexation kinetics, the rupture forces were probed under thermodynamic equilibrium. The force values followed the same trend as the free binding energy Delta G degrees measured for model guest compounds in solution or on beta-CD monolayers, as determined by microcalorimetry and surface plasmon resonance measurements, respectively. A descriptive model was developed to correlate quantitatively the pull-off force values with the Delta G degrees of the complexes, based on the evaluation of the energy potential landscape of tip-surface interaction.

Cyclodextrin derivatives modified with seven thioether moieties (1) or with one thiol moiety (2) bind to gold. Monolayers on gold of 1 or mixed monolayers of 2 and mercaptoundecanol were characterized by electrochemistry, wettability, and atomic force microscopy (AFM). Monolayers of 1 are well-ordered, but the order in the mixed monolayers depends on the ratio of 2 to mercaptoundecanol. With sufficient alkyl chains to fill the space under the cyclodextrin moiety of 2, the monolayers are densely packed. Guest recognition at these monolayers in water was studied by surface plasmon resonance (SPR) spectroscopy. For simple organic guests, monolayers of 1 showed the same selectivity and binding strength as beta-cyclodextrin in solution: however, the selectivity towards steroidal bile salts differs from solution. The mixed monolayers of 2, in which the cyclodextrin is less substituted and has more flexibility, bind steroidal guests (6a-6e) with the same selectivity as beta-cyclodextrin in solution.

We have developed synthesis routes for the introduction of short and long dialkylsulfides onto the primary side of a-, b-, and g-cyclodextrins. Monolayers of these cyclodextrin adsorbates were characterized by electrochemistry, wettability studies, X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry (TOF-SIMS), and atomic force microscopy (AFM). The differences in thickness and polarity of the outerface of the monolayers were measured by electrochemistry and wettability studies. On average about 70 % of the sulfide moieties were used for binding to the gold, as measured by XPS. Tof-SIMS measurements showed that the cyclodextrin adsorbates adsorb without any bond breakage. AFM measurements revealed for b-cyclodextrin monolayers a quasihexagonal lattice with a lattice constant of 20.6 , which matches the geometrical size of the adsorbate. The a-cyclodextrin and g-cyclodextrin monolayers are less ordered. Interactions of the anionic guests 1-anilinonaphthalene-8sulfonic acid (1,8-ANS) and 2-(p-toluidinyl)naphthalene-6-sulfonic acid (2,6-TNS) and the highly ordered monolay-ers of heptapodant b-cyclodextrin adsorbates were studied by surface plasmon resonance (SPR) and electrochemical impedance spectroscopy. The SPR measurements clearly showed interactions between a b-cyclodextrin monolayer and 1,8-ANS. Electrochemical impedance spectroscopy measurements gave high responses even at low guest concentrations ( 5 mm). The association constant for the binding of 1,8-ANS (K 289 000 AE 13 000 m À1 ) is considerably higher than the corresponding value in solution. (Partial) methylation of the secondary side of the b-cyclodextrin strongly decreases the binding.

The dansyl-modified dimer 9 complexes strongly with the steroidal bile salts. Relative to native beta-cyclodextrin, the binding of cholate (1a) and deoxycholate (1b) salts is especially enhanced. These steroids bind exclusively in a 1:1 fashion. For other bile salts (1c-1e) both 1:1 and 1:2 complexes were observed with stabilities similar to those of native beta-cyclodextrin. This indicates that only one cavity is used, with a small contribution from the second. The difference is attributed to the absence of a 12-hydroxy group in the second group of steroids. Comparison with a dimer that lacks the dansyl moiety (6) shows that this group especially hinders the cooperative binding of la and 1b. The smaller interference in the binding of the other steroids indicates that self-inclusion of the dansyl moiety hardly occurs. This weak self-inclusion is supported by fluorescence studies. The dansyl fluorescence of dimer 9 is less blue-shifted than that of other known dansyl-appended cyclodextrin derivatives; this is indicative of a more polar micro-environment. Addition of guests causes a change in fluorescence intensity.

Thioethers were used as adsorbates for preparing gold nanoparticles. Different thioether derivatives having from 1 to 4 thioether functionalities were synthesized. Colloids were prepared in a two-phase system, and characterized by 1 H NMR and transmission electron microscopy (TEM). The stability of colloids protected by thioethers increases with the number of ligands per molecule. Monothioethers need longer chain lengths or costabilization by (oct) 4 NBr in order to give stable, redispersible gold colloids. Gold colloids stabilized by the bis(thioether) 5 could not be redispersed after precipitation. Colloids stabilized by the tris(thioether) 6 were only formed at elevated temperature (60 uC) indicating the need of chain reorientation for attaining stable colloids. Tris(thioether) 7 gave stable colloids at room temperature, which could be redispersed even after precipitation. Tetrakis(thioether) 8 gave the smallest particle size and narrowest size distribution.{The IUPAC name for 5-norbornene-2-exo-3-exo-dimethanol is 2,3bis(hydroxymethyl)bicyclo[2.2.1]hept-5-ene

The rupture forces of individual β-cyclodextrin (β-CD)-ferrocene host-guest complexes in an aqueous medium were measured by dynamic single molecule force spectroscopy using an atomic force microscope (AFM). The thiol-derivatized ferrocene guest was immobilized in self-assembled monolayers on goldcoated AFM tips, while the heptasulfide β-CD host was self-assembled onto atomically flat Au(111) substrates. The effects of the alkyl spacer length of the ferrocene adsorbates, the relative concentration of ferrocene in the mixed monolayer on the AFM tip, and the unloading rate on the observed molecular unbinding events were studied. Depending on the concentration of ferrocene moieties on the AFM tip, multiple or predominantly single pull-off events were observed. A statistical analysis showed that the observed rupture forces are integer multiples of one fundamental force quantum of 55 ( 10 pN, which is attributed to the rupture of a single host-guest complex. This force quantum is found to be independent of the number of interacting host-guest pairs, independent of the spacer length, and independent of the unloading rate. These results indicate that the host-guest complex rupture forces were probed under conditions of thermodynamic equilibrium.

We have developed synthesis routes for the introduction of short and long dialkylsulfides onto the primary side of alpha-, beta-, and gamma-cyclodextrins. Monolayers of these cyclodextrin adsorbates were characterized by electrochemistry, wettability studies, X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry (TOF-SIMS), and atomic force microscopy (AFM). The differences in thickness and polarity of the outerface of the monolayers were measured by electro-chemistry and wettability studies. On average about 70% of the sulfide moieties were used for binding to the gold, as measured by XPS. Tof-SIMS measurements showed that the cyclodextrin adsorbates adsorb without any bond breakage. AFM measurements revealed for beta-cyclodextrin monolayers a quasi-hexagonal lattice with a lattice constant of 20.6 A, which matches the geometrical size of the adsorbate. The alpha-cyclodextrin and gamma-cyclodextrin monolayers are less ordered. Interactions of the anionic guests 1-anilinonaphthalene-8-sulfonic acid (1,8-ANS) and 2-(p-toluidinyl)naphthalene-6-sulfonic acid (2,6-TNS) and the highly ordered monolayers of heptapodant beta-cyclodextrin adsorbates were studied by surface plasmon resonance (SPR) and electrochemical impedance spectroscopy. The SPR measurements clearly showed interactions between a beta-cyclodextrin monolayer and 1,8-ANS. Electrochemical impedance spectroscopy measurements gave high responses even at low guest concentrations (< or = 5 microM). The association constant for the binding of 1,8-ANS (K = 289,000 +/- 13,000M-1) is considerably higher than the corresponding value in solution. (Partial) methylation of the secondary side of the beta-cyclodextrin strongly decreases the binding.

Collagen is a widely used biomaterial in cardiac tissue engineering studies. However, as a natural material, it suffers from variability between batches that can complicate the standardization of culture conditions. In contrast, synthetic materials are modifiable, have well-defined structures and more homogeneous batches can be produced. In this study, several collagen-like synthetic self-assembling nanofiber hydrogels were examined for their suitability for cardiomyocyte culture in 2D and 3D. Six different nanofiber coatings were used in the 2D format with neonatal rat cardiomyocytes (NRCs) and human embryonic stem-cell-derived cardiomyocytes (hESC-CMs). The viability, growth, and functionality of the 2D-cultured cardiomyocytes were evaluated. The best-performing nanofiber coatings were selected for 3D experiments. Hydrophilic pH-sensitive nanofiber hydrogel coassembled with hyaluronic acid performed best with both NRCs and hESC-CMs. Hydrophilic non-pH-sensitive nanofiber hydrogels supported the growth of NRCs; however, their ability to promote attachment and growth of hESC-CMs was limited. NRCs also grew on hydrophobic nanofiber hydrogels; however, the cell-supporting capacity of these hydrogels was inferior to that of the hydrophilic hydrogel materials. This is the first study demonstrating that hydrophilic self-assembling nanofiber hydrogels support the culture of both NRCs and hESC-CMs, which suggests that these biomaterials hold promise for cardiac tissue engineering.