One of the most pervasive problems afflicting people throughout the world is inadequate access to clean water and sanitation. Problems with water are expected to grow worse in the coming decades, with water scarcity occurring globally, even in regions currently considered water-rich. Addressing these problems calls out for a tremendous amount of research to be conducted to identify robust new methods of purifying water at lower cost and with less energy, while at the same time minimizing the use of chemicals and impact on the environment. Here we highlight some of the science and technology being developed to improve the disinfection and decontamination of water, as well as efforts to increase water supplies through the safe re-use of wastewater and efficient desalination of sea and brackish water.

In recent years, numerous large-scale seawater desalination plants have been built in water-stressed countries to augment available water resources, and construction of new desalination plants is expected to increase in the near future. Despite major advancements in desalination technologies, seawater desalination is still more energy intensive compared to conventional technologies for the treatment of fresh water. There are also concerns about the potential environmental impacts of large-scale seawater desalination plants. Here, we review the possible reductions in energy demand by state-of-the-art seawater desalination technologies, the potential role of advanced materials and innovative technologies in improving performance, and the sustainability of desalination as a technological solution to global water shortages.

No abstract

No abstract

Increasing demands for energy-efficient separations in applications ranging from water purification to petroleum refining, chemicals production, and carbon capture have stimulated a vigorous search for novel, high-performance separation membranes. Synthetic membranes suffer a ubiquitous, pernicious trade-off: highly permeable membranes lack selectivity and vice versa. However, materials with both high permeability and high selectivity are beginning to emerge. For example, design features from biological membranes have been applied to break the permeability-selectivity trade-off. We review the basis for the permeability-selectivity trade-off, state-of-the-art approaches to membrane materials design to overcome the trade-off, and factors other than permeability and selectivity that govern membrane performance and, in turn, influence membrane design.

A new equation for predicting the single-collector contact efficiency (eta0) in physicochemical particle filtration in saturated porous media is presented. The correlation equation is developed assuming that the overall single-collector efficiency can be calculated as the sum of the contributions of the individual transport mechanisms--Brownian diffusion, interception, and gravitational sedimentation. To obtain the correlation equation, the dimensionless parameters governing particle deposition are regressed against the theoretical value of the single-collector efficiency over a broad range of parameter values. Rigorous numerical solution of the convective-diffusion equation with hydrodynamic interactions and universal van der Waals attractive forces fully incorporated provided the theoretical single-collector efficiencies. The resulting equation overcomes the limitations of current approaches and shows remarkable agreement with exact theoretical predictions of the single-collector efficiency over a wide range of conditions commonly encountered in natural and engineered aquatic systems. Furthermore, experimental data are in much closer agreement with predictions based on the new correlation equation compared to other available expressions.

We provide the first evidence that the size (diameter) of carbon nanotubes (CNTs) is a key factor governing their antibacterial effects and that the likely main CNT-cytotoxicity mechanism is cell membrane damage by direct contact with CNTs. Experiments with well-characterized single-walled carbon nanotubes (SWNTs) and multiwalled carbon nanotubes (MWNTs) demonstrate that SWNTs are much more toxic to bacteria than MWNTs. Gene expression data show that in the presence of both MWNTs and SWNTs, Escherichia coli expresses high levels of stress-related gene products, with the quantity and magnitude of expression being much higher in the presence of SWNTs.

No abstract