Summary Thermoelectric generator, which converts heat into electrical energy, has great potential to power portable devices. Nevertheless, the efficiency of a thermoelectric generator suffers due to inefficient thermoelectric material performance. In the last two decades, the performance of inorganic thermoelectric materials has been significantly advanced through rigorous efforts and novel techniques. In this review, major issues and recent advancements that are associated with the efficiency of inorganic thermoelectric materials are encapsulated. In addition, miscellaneous optimization strategies, such as band engineering, energy filtering, modulation doping, and low dimensional materials to improve the performance of inorganic thermoelectric materials are reported. The methodological reviews and analyses showed that all these techniques have significantly enhanced the Seebeck coefficient, electrical conductivity, and reduced the thermal conductivity, consequently, improved ZT value to 2.42, 2.6, and 1.85 for near‐room, medium, and high temperature inorganic thermoelectric material, respectively. Moreover, this review also focuses on the performance of silicon nanowires and their common fabrication techniques, which have the potential for thermoelectric power generation. Finally, the key outcomes along with future directions from this review are discussed at the end of this article.

No abstract

Summary Thermoelectric generator is among the earliest initiated electricity‐harvesting methods. It is a very potential power harvester that can convert wasteful thermal energy into electricity. However, it often suffers from low energy conversion rate due to its inconsistent heat source, inefficient thermoelectric material (or thermoelement) performance, and incompetent structural issues. Progressively for the first time, detailed methodological surveys and analyses are made for bulk, thick, and thin films in this review. This is in order to accommodate better insights and comprehensions on the emerging trends and progresses of thermoelectric generators from 1989 to 2017. The research interests in thermoelectric generators have started back in 1989, and have continuously experienced emerging progresses in the number of studies over the last years. The methodological reviews and analyses of thermoelectric generator showed that almost 46.6% of bulk and 46.1% of thick and thin film research works, respectively, are actively progressed in 2014 to 2017. Nearly 86.2% of bulk and 44.1% of thick and thin film thermoelectric generators are realizing in between 0.001 and 4 μW cm−2 K−2, while 43.1% of thick and thin films are earning among 10−6 to 0.001 μW cm−2 K−2. The highest achievement made until now is 2.5 W cm−2 at a temperature difference of 140 K and thermoelectric efficiency factor of 127.55 μW cm−2 K−2. This achievement remarked positive elevation for the field and interest in thermoelectric power generation. Consecutively, the research trends of fundamental devices' structure, thermoelement, fabrication, substrate, and heat source characteristics are analyzed too, along with the desired improvement highlights for the applications of thermoelectric generators.

Wearable sensors and biomedical devices have attracted a great deal of attention among users. Despite technological advancements in this field, a mixture of both progress and setbacks has been witnessed. The limited battery life of these devices for long‐term operation remains a major challenge. In this context, thermoelectric generators have emerged as potential candidates for harvesting energy from temperature gradients to power wearable sensors and devices. This review focuses on the working mechanism of a thermoelectric generator, as well as the current progress of a variety of promising and widely used inorganic and organic thermoelectric materials. Encouragingly, the highest ZT values of 2.27, 2.5, 2.8, 2.3, and 1.85 are obtained for bismuth telluride, lead telluride, tin selenide, copper selenide, and magnesium antimonide, respectively, at various temperature ranges. Meanwhile, organic materials such as poly (3,4‐ethylenedioxythiophene) polystyrene sulfonate, polyaniline composite, and graphdiyne showed the highest ZT values of 0.75, 0.74, and 4.8, respectively, at near‐room temperature. Furthermore, numerous novel thermoelectric generator‐powered wearable health monitoring sensors and Internet of Things devices are also presented. Finally, the current challenges and perspectives on the future development of thermoelectric generator, in particular for efficient materials and self‐powered devices, are also discussed.

Micro-electromechanical-system (MEMS) based actuators, which transduce certain domains of energy into mechanical movements in the microscopic scale, are increasingly contributing to the areas of biomedical engineering and healthcare applications. They are enabling new functionalities in biomedical devices through their unique miniaturized features. An effective selection of a particular actuator, among a wide range of actuator types available in the MEMS field, needs to be made through the assessment of many factors involved in both the actuator itself and the target application. This paper presents an overview of the state-of-the-art MEMS actuators that have been developed for biomedical applications. The actuation methods, working principle, and imperative features of these actuators are discussed along with their specific applications. An emphasis of this review is placed on temperature-responsive, electromagnetic, piezoelectric, and fluid-driven actuators towards various application areas including lab-on-a-chip, drug delivery systems, cardiac devices and surgical tools. It also highlights the key issues of MEMS actuators in light of biomedical applications.

Energy harvesters (EHs) are widely used to transform ambient energy sources into electrical energy, and have tremendous potential to power wearables electronics and biomedical devices by eliminating, or at least increasing, the battery life. Nevertheless, the use of EHs for a specific application depends on various aspects including the form of energy source, the structural configuration of the device, and the properties of materials. This paper presents a comprehensive review of the classification of EHs, notably thermoelectric generators (TEGs), triboelectric nanogenerators (TENGs), and piezoelectric generators (PEGs) that allows a wide variety of devices to be operated. The EHs are discussed in terms of their operating principles, optimization factors, state‐of‐the‐art materials, and device structure, that directly influence their operational efficiency. Besides, the breakthrough performance of each of the EHs listed above is highlighted. From the review and analysis, the maximum output power density of 9.2 mW cm−2, 50 mW cm−2, and 64.9 µW cm−2, respectively, are obtained from the TEG, TENG, and PEG, respectively. Furthermore, recent applications relevant to a specific EH and their output performance, are also enlightened. Eventually, the essential outcomes and future direction from this review are discussed and encapsulated.

No abstract

No abstract