Intisari— Pada penelitian ini di lakukan perancangan sebuah sistem pengendali kecerahan lampu utama pada mobil berbasis Arduino Uno. Tujuan dari sistem ini adalah membuat dan merancang sistem otomatisasi yang dapat mengendalikan kecerahan lampu utama pada mobil berdasarkan parameter keadaan di sekitar yang di lalui kendaraan tersebut. Dengan sistem ini diharapkan dapat lebih mengoptimalkan penggunaan daya pada baterai mobil. Dengan alasan tersebut maka di gunakanlah metode Fuzzy Logic untuk pengambilan keputusan. Penggunaan metode ini karena solusi dari kondisi-kondisi yang terjadi dalam berkendara dapat di parameterkan menggunakan metode Fuzzy. Masukan dari metode ini adalah tingkat kecerahan cahaya yang di baca oleh sensor BH1750 dan jarak kendaraan lain yang berada di depannya di baca oleh sensor HCSR04. Parameter jarak dan kecerahan cahaya tersebutlah yang di gunakan peneulis sebagai penentu fuzzy rule dari sistem ini. Dimana hasil pembacaan kedua sensor tersebut akan mempengaruhi nilai PWM Out dari Arduino tersebut. Dan perubahan nilai PWM tersebut akan berpengaruh terhadap tingkat kecerahan lampu utama mobil tersebut. Hasil dari dari pengontrolan kecerahan cahaya ini cukup efektif dalam menjaga efisiensi tegangan. Pada kondisi Low-Beam tegangan rata-rata 1,6 Volt, Pada kondisi Med-Beam 4,9 Volt, dan pada kondisi High-Beam 8,6 Volt.
Abstract�Developments in the field of livestock some have not used technology in the process of feeding and drinking, the process is still using human. This system realizes Aduino Nano to control the entire automation system in the form of feeding and drinking, so that the production process runs effectively and efficiently. This system consists of giving a feed schedule and the amount of feed given to chickens every day for feeding consists of two feeders who do morning and evening. System to provide input to the process using an automated system. This process works after all inputs have been given, starting from the first, second and third types of feed coming out through the door which is opened using the principle of relay movement in accordance with the specified amount, the feed already in the mixing place will be stirred and calcified, then feed already mixed will be sent to each chicken coop evenly using an automatic system. The results of the system test can be concluded that the feed scheduling system specified by Arduino Nano can work with a level of success and the security system goes well when an error occurs. Communication that occurs between Arduino Nano and other components runs well. Intisari� Perkembangan pada bidang peternakan beberapa belum menggunakan teknologi dalam proses pemberian pakan dan minum, proses yang dilakukan masih menggunakan manusia. Sistem ini merealisasikan Arduino Nano untuk mengendalikan seluruh sistem automasi berupa pemberian pakan dan minum, agar proses produksi berjalan dengan efektif dan efisien. Sistem ini terdiri dari pemberian jadwal pakan dan jumlah pakan yang diberikan pada ayam setiap hari untuk pemberian pakan terdiri dari dua kali pemberi pakan yang di lakukan pagi dan sore hari. Sistem untuk memberikan input pada prosesnya menggunakan sistem otomatis. Proses ini bekerja setelah semua input telah diberikan, mulai dari jenis pakan pertama, kedua dan ketiga keluar melalui pintu yang dibuka menggunakan prinsip pergerakan relay sesuai dengan jumlah yang ditentukan, pakan yang sudah terdapat pada tempat pencampuran akan di aduk dan tercapur, kemudian pakan yang sudah tercampur akan di kirim ke setiap kandang ayam secara merata meggunakan sistem otomatis. Hasil pengujian sitem dapatdisimpulkan bahwa pada sistem penjadwalan pakan yang ditentukan oleh Arduino Nano dapat bekerja dengan tingkat keberhasilan serta sistem keamanan berjana dengan baik ketika terjadi error. Komunikasi yang terjadi antara Arduino Nano dengan komponen lainnya berjalan dengan baik
Dalam dunia robotika khususnya bagi pengguna NodeMcu ESP 8266 maka pastinya menggunakan software Arduino IDE dalam programannya. Maka dari itu teknologi yang dikembangkan dalam penulisan ini membantu dalam menghitung kecepatan kendaraan. Dihubungkan melalui android yang akan memonitoring suatu kendaraan tersebut, system monitoring ini bekerja membaca kecepatan kendaraan yang dimana ketika kendaraan melakukan pelanggaran maka kecepatan akan di monitoring melalui Smartphone Android dan buzzer dalam system ini sebagai alarm pengingat di kendaraan dimana ketika kendaraan melaju di kecepatan 25 km/jam alarm akan memberitahukan bahwa kendaraan telah melampaui batas yang ditentukan. alarm ini bekerja ketika sebelum 25 km/jam kecepatan alarm memberitahukan melalui bunyi yang sangat pelan tetapi ketika melebihi dari 25 km/jam alarm berbunyi nyaring. Dan juga ketika melewati pembatas lokasi yang dimana ketika kendaraan berada di luar batas yang di tentukan maka kecepatan kendaraan tidak bisa di monitoring malalui system tetapi jika kendaraan masuk lagi di area yg di tentukan system akan dapat memonitoring kecepatan kendaraan lagi.
Curah hujan di Indonesia tiap tahunnya cukup tinggi. Hal ini menyebabkan beberapa wilayah Indonesia sering terjadi bencana banjir ketika musim penghujan tiba karena beberapa faktor seperti kondisi lingkungan yang rusak, penebangan hutan secara liar dan kondisi tempat yang lebih rendah dari sekitarnya. Oleh karena itu diperlukan perancangan sistem peringatan dini banjir berbasis Web (internet) atau biasa dikenal dengan teknologi Internet Of Things ( IoTs ) yang dapat memberikan informasi ke masyarakat yang terdekat dengan lokasi banjir dengan cepat dan akurat. Metode penelitian yang digunakan adalah Menentukan komponen utama ( mikrokontroler NodeMCU ESP8266 dan sensor ultrasonik HC-SR04 ) yang akan digunakan sebagai penyusun prototype, Menentukan dan mempelajari Komponen pendukung penyusun prototype , Menentukan software pendukung dalam membantu proses perancangan, Menyusun serta memilih Bahasa pemrograman yang tepat dan akurat pada sistem prototype, dan Membandingkan pengaplikasian cara kerja sistem pada website yang terhubung dengan prototype, dengan sistem yang lain ( aplikasi , sms gateway, dll ).
Abstract— The LPG (Liquefied Petroleum Gas) gas leak detection and monitoring system is an anticipatory measure for safety from hazards such as gas cylinder explosions. This research aims to build a detection system by integrating MQ-6 sensor, Arduino microcontroller and ESP8266. Data can then be displayed on the Blynk application and notifications will be given via the application and email. The process of sending data using SIM800L module GSM/GPRS is a part that serves to communicate between the main monitors with mobile phone and the module ESP8266E ESP 12E WIFI IOT for data transfer in WIFI network . And this system has fulfilled the rules of the Internet of things, making it easier for the community in its application.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.