No abstract

No abstract

This paper presents a new current-mode single input multi output (SIMO) type biquad employing one voltage differencing transconductance amplifier (VDTA), two grounded capacitors and a single grounded resistor. The configuration realizes all basic filter functions (i.e. Low Pass (LP), High Pass (HP), Band Pass (BP), Notch (BR) and All Pass (AP)). The natural frequency (ω 0 ) and bandwidth (BW) are independently tunable. The workability of proposed configuration has been verified using SPICE simulation with TSMC CMOS 0.18 μm process parameters.

An electronically controllable fully uncoupled explicit current-mode quadrature oscillator employing Voltage Differencing Transconductance Amplifiers (VDTAs) as active elements has been presented. The proposed configuration employs two VDTAs along with grounded capacitors and offers the following advantageous features 1) fully and electronically independent control of condition of oscillation (CO) and frequency of oscillation (FO); 2) explicit currentmode quadrature oscillations; and 3) low active and passive sensitivities. The workability of proposed configuration has been demonstrated by PSPICE simulations with TSMC CMOS 0.18 μm process parameters.

No abstract

No abstract

No abstract

This paper proposes a new single resistancecontrolled sinusoidal oscillator (SRCO) which employs only onevoltage differencing current conveyor (VDCC), two groundedresistors and two grounded capacitors. The presented circuitconfiguration offers the following advantageous features (i)explicit current-mode output with independent control ofcondition of oscillation (CO) and frequency of oscillation (FO) (ii)low active and passive sensitivities and (iii) a very good frequencystability. The proposed structure can also be configured as (a)trans-admittance low pass filter and band pass filter and (b)quadrature oscillator. The validity of the proposed SRCO,quadrature oscillator and trans-admittance low pass filter andband pass filter has been verified by PSPICE simulations usingTSMC CMOS 0.18μm process model parameters.