Abstract:Single qubit rotations and two-qubit CNOT operations are crucial ingredients for universal quantum computing. While high fidelity single qubit operations have been achieved using the electron spin degree of freedom, realizing a robust CNOT gate has been a major challenge due to rapid nuclear spin dephasing and charge noise. We demonstrate an efficient resonantly-driven CNOT gate for electron spins in silicon. Our platform achieves single-qubit rotations with fidelities >99%, as verified by randomized benchmarking. Gate control of the exchange coupling allows a quantum CNOT gate to be implemented with resonant driving in ~200 ns. We use the CNOT gate to generate a Bell state with 75% fidelity, limited by quantum state readout. Our quantum dot device architecture opens the door to multi-qubit algorithms in silicon.Main Text: Gate defined semiconductor quantum dots are a powerful platform for isolating and coherently controlling single electron spins (1, 2). Silicon quantum dots can leverage state-ofthe-art industrial nanofabrication capabilities for scalability, and support some of the longest quantum coherence times measured in the solid-state (3-5). By engineering local magnetic field gradients, electron spins can be electrically controlled (6, 7) with single qubit gate fidelities exceeding 99% (8). Despite this progress, demonstrations of two-qubit gates with quantum dot spins are scarce due to technological and materials challenges (9, 10). While exchange control of spins was demonstrated as early as 2005, high fidelity exchange gates have been difficult to achieve due to nuclear spin dephasing and charge noise (10, 11). A demonstration of an efficient CNOT gate for spins in silicon will open a path for multi-qubit algorithms in a scalable semiconductor system.Here we demonstrate a ~200 ns CNOT gate in a silicon semiconductor double quantum dot (DQD), nearly an order of magnitude faster than the previously demonstrated composite CNOT gate (9). The gate is implemented by turning on an exchange interaction, which results in a state-selective electron spin resonance (ESR) transition that is used to implement a CNOT gate with a single microwave (MW) pulse. Local magnetic field gradients allow for all-electrical control of the spin states with single qubit gate fidelities exceeding 99%, enabled by the largely nuclear-spin-free environment of the silicon host lattice. In contrast with previous DQD implementations of the exchange gate, our CNOT gate is implemented at a symmetric operating point, where the exchange coupling J is first-order insensitive to charge noise (12,13). By combining the CNOT with single qubit gates we create a Bell state with a fidelity F = 75%, limited primarily by the qubit readout visibility (14). Our demonstration of a universal set of fast quantum gates for spins in silicon paves the way for the first multi-qubit algorithms with semiconductor spin qubits (15).The spin of a single electron is used to encode a qubit (16). A gate-defined DQD (Fig. 1A) is used to isolate two electron...

Quantum computation requires many qubits that can be coherently controlled and coupled to each other [1]. Qubits that are defined using lithographic techniques are often argued to be promising platforms for scalability, since they can be implemented using semiconductor fabrication technology [2][3][4][5]. However, leading solidstate approaches function only at temperatures below 100 mK, where cooling power is extremely limited, and this severely impacts the perspective for practical quantum computation. Recent works on spins in silicon have shown steps towards a platform that can be operated at higher temperatures by demonstrating long spin lifetimes [6], gate-based spin readout [7], and coherent singlespin control [8], but the crucial two-qubit logic gate has been missing. Here we demonstrate that silicon quantum dots can have sufficient thermal robustness to enable the execution of a universal gate set above one Kelvin. We obtain singlequbit control via electron-spin-resonance (ESR) and readout using Pauli spin blockade. We show individual coherent control of two qubits and measure single-qubit fidelities up to 99.3 %. We demonstrate tunability of the exchange interaction between the two spins from 0.5 up to 18 MHz and use this to execute coherent two-qubit controlled rotations (CROT). The demonstration of 'hot' and universal quantum logic in a semiconductor platform paves the way for quantum integrated circuits hosting the quantum hardware and their control circuitry all on the same chip, providing a scalable approach towards practical quantum information.Spin qubits based on quantum dots are among the most promising candidates for large-scale quantum computation [2,9,10]. Quantum coherence can be maintained in these systems for extremely long times [11] by using isotopically enriched silicon ( 28 Si) as the host material [12]. This has enabled the demonstration of singlequbit control with fidelities exceeding 99.9% [13,14] and the execution of two-qubit logic [15][16][17][18]. The potential to build larger systems with quantum dots manifests in the ability to deterministically engineer and optimize qubit locations and interactions using a technology that greatly resembles today's complementary metal-oxide semiconductor (CMOS) manufacturing. Nonetheless, quantum error correction schemes predict that millions to billions of qubits will be needed for practical quantum informa-tion [19]. Considering that today's devices make use of more than one terminal per qubit [20], wiring up such large systems remains a formidable task. In order to avoid an interconnect bottleneck, quantum integrated circuits hosting the qubits and their electronic control on the same chip have been proposed [2,3,21]. While these architectures provide an elegant way to increase the qubit count to large numbers by leveraging the success of classical integrated circuits, a key question is whether the qubits will be robust against the thermal noise imposed by the power dissipation of the electronics. Demonstrating a universal gate set at elevat...

No abstract

High-fidelity control of quantum bits is paramount for the reliable execution of quantum algorithms and for achieving fault tolerance—the ability to correct errors faster than they occur1. The central requirement for fault tolerance is expressed in terms of an error threshold. Whereas the actual threshold depends on many details, a common target is the approximately 1% error threshold of the well-known surface code2,3. Reaching two-qubit gate fidelities above 99% has been a long-standing major goal for semiconductor spin qubits. These qubits are promising for scaling, as they can leverage advanced semiconductor technology4. Here we report a spin-based quantum processor in silicon with single-qubit and two-qubit gate fidelities, all of which are above 99.5%, extracted from gate-set tomography. The average single-qubit gate fidelities remain above 99% when including crosstalk and idling errors on the neighbouring qubit. Using this high-fidelity gate set, we execute the demanding task of calculating molecular ground-state energies using a variational quantum eigensolver algorithm5. Having surpassed the 99% barrier for the two-qubit gate fidelity, semiconductor qubits are well positioned on the path to fault tolerance and to possible applications in the era of noisy intermediate-scale quantum devices.

The goal of this article is to review the progress of three-electron spin qubits from their inception to the state of the art. We direct the main focus towards the exchange-only qubit (Bacon et al 2000 Phys. Rev. Lett. 85 1758-61, DiVincenzo et al 2000 Nature 408 339) and its derived versions, e.g. the resonant exchange (RX) qubit, but we also discuss other qubit implementations using three electron spins. For each three-spin qubit we describe the qubit model, the envisioned physical realization, the implementations of single-qubit operations, as well as the read-out and initialization schemes. Two-qubit gates and decoherence properties are discussed for the RX qubit and the exchange-only qubit, thereby completing the list of requirements for quantum computation for a viable candidate qubit implementation. We start by describing the full system of three electrons in a triple quantum dot, then discuss the charge-stability diagram, restricting ourselves to the relevant subsystem, introduce the qubit states, and discuss important transitions to other charge states (Russ et al 2016 Phys. Rev. B 94 165411). Introducing the various qubit implementations, we begin with the exchange-only qubit (DiVincenzo et al 2000 Nature 408 339, Laird et al 2010 Phys. Rev. B 82 075403), followed by the RX qubit (Medford et al 2013 Phys. Rev. Lett. 111 050501, Taylor et al 2013 Phys. Rev. Lett. 111 050502), the spin-charge qubit (Kyriakidis and Burkard 2007 Phys. Rev. B 75 115324), and the hybrid qubit (Shi et al 2012 Phys. Rev. Lett. 108 140503, Koh et al 2012 Phys. Rev. Lett. 109 250503, Cao et al 2016 Phys. Rev. Lett. 116 086801, Thorgrimsson et al 2016 arXiv:1611.04945). The main focus will be on the exchange-only qubit and its modification, the RX qubit, whose single-qubit operations are realized by driving the qubit at its resonant frequency in the microwave range similar to electron spin resonance. Two different types of two-qubit operations are presented for the exchange-only qubits which can be divided into short-ranged and long-ranged interactions. Both of these interaction types are expected to be necessary in a large-scale quantum computer. The short-ranged interactions use the exchange coupling by placing qubits next to each other and applying exchange-pulses (DiVincenzo et al 2000 Nature 408 339, Fong and Wandzura 2011 Quantum Inf. Comput. 11 1003, Setiawan et al 2014 Phys. Rev. B 89 085314, Zeuch et al 2014 Phys. Rev. B 90 045306, Doherty and Wardrop 2013 Phys. Rev. Lett. 111 050503, Shim and Tahan 2016 Phys. Rev. B 93 121410), while the long-ranged interactions use the photons of a superconducting microwave cavity as a mediator in order to couple two qubits over long distances (Russ and Burkard 2015 Phys. Rev. B 92 205412, Srinivasa et al 2016 Phys. Rev. B 94 205421). The nature of the three-electron qubit states each having the same total spin and total spin in z-direction (same Zeeman energy) provides a natural protection against several sources of noise (DiVincenzo et al 2000 Nature 408 339, Taylor et al 2013 Phys. R...

Motivated by recent experiments of Zajac et al.[1], we theoretically describe high-fidelity twoqubit gates using the exchange interaction between the spins in neighboring quantum dots subject to a magnetic field gradient. We use a combination of analytical calculations and numerical simulations to provide the optimal pulse sequences and parameter settings for the gate operation. We present a novel synchronization method which avoids detrimental spin flips during the gate operation and provide details about phase mismatches accumulated during the two-qubit gates which occur due to residual exchange interaction, non-adiabatic pulses, and off-resonant driving. By adjusting the gate times, synchronizing the resonant and off-resonant transitions, and compensating these phase mismatches by phase control, the overall gate fidelity can be increased significantly.arXiv:1711.00754v1 [cond-mat.mes-hall]

We investigate the behavior of qubits consisting of three electron spins in double and triple quantum dots subject to external electric fields. Our model includes two independent bias parameters, ε and εM , which both couple to external electromagnetic fields and can be controlled by gate voltages applied to the quantum dot structures. By varying these parameters one can switch the qubit type by shifting the energies in the single quantum dots thus changing the electron occupancy in each dot. Starting from the asymmetric resonant (ARX) exchange qubit with a (2,0,1) and (1,0,2) charge admixture one can smoothly cross over to the resonant exchange (RX) qubit with a detuned (1,1,1) charge configuration, and to the exchange-only (EO) qubit with the same charge configuration but equal energy levels down to the hybrid qubits with (1,2,0) and (0,2,1) charge configurations. Here, (l, m, n) describes a configuration with l electrons in the left dot, m electrons in the center dot, and n electrons in the right dot. We first focus on random electromagnetic field fluctuations, i.e., "charge noise", at each quantum dot resulting in dephasing of the qubit and provide a complete map of the resulting dephasing time as a function of the bias parameters. We pay special attention to the so-called sweet spots and double sweet spots of the system which are least susceptible to noise. In the second part we investigate the coupling of the qubit system to the coherent quantized electromagnetic field in a superconducting strip-line cavity and also provide a complete map of the coupling strength as a function of the bias parameters. We analyze the asymmetric qubit-cavity coupling via ε and the symmetric coupling via εM .

We investigate the influence of electrical charge noise on a resonant exchange (RX) qubit in a triple quantum dot. This RX qubit is a variation of the exchange-only spin qubit which responds to a narrow-band resonant frequency. Our noise model includes uncorrelated charge noise in each quantum dot giving rise to two independent (noisy) bias parameters ε and ∆. We calculate the energy splitting of the two qubit states as a function of these two bias detuning parameters to find "sweet spots", where the qubit is least susceptible to noise. Our investigation shows that such sweet spots exist within the low bias regime, in which the bias detuning parameters have the same magnitude as the hopping parameters. The location of the sweet spots in the (ε, ∆) plane depends on the hopping strength and asymmetry between the quantum dots. In the regime of weak charge noise, we identify a new favorable operating regime for the RX qubit based on these sweet spots.