Titanium-based materials are widely used for implant treatments such as artificial dental roots. Surface treatment has the potential to improve not only the biocompatibility but also the chemical and mechanical durability of the surface without changing the mechanical properties of the metal. A relatively thick titanium oxide film can be formed by the anodic oxidation method. Phosphoric acid or sulfuric acid electrolytic solution has previously been used for anodic oxidation. Such anodized films have excellent film hardness, abrasion resistance, and adhesion. In this study, titanium plate was anodized using an aqueous solution of sulfuric acid in which titanium oxide powder was suspended. A 2800-nm-thick titanium oxide film was formed, which was thicker than that obtained using phosphoric acid electrolyte. The titanium plate was immersed in simulated body fluid for 1 day to evaluate the photocatalytic activity and protein adsorption ability, and a homogeneous crack-free hydroxyapatite layer was formed. This titanium plate showed high methylene blue bleaching capacity. The adsorption ability of the acidic protein of the anodized titanium plate subjected to the above treatment was high. This suggests that this titanium plate has antimicrobial properties and protein adsorption ability. Thus, we report that a titanium plate, anodized with a sulfuric acid aqueous electrolyte solution containing suspended TiO2 powder and immersed in simulated body fluid, might behave as an antibacterial and highly biocompatible implant material.
In this study, a novel titania-supported spherical porous hydroxyapatite (sHAp + TiO2) was prepared by compounding minute, uniquely shaped spherical porous hydroxyapatites (sHAp) with TiO2. Adsorption of the representative protein bovine serum albumin (BSA) was evaluated and simulated body fluid immersion experiments were carried out. Minimal adsorption of BSA to TiO2 was observed, and 33% and 25% adsorption to sHAp + TiO2 and sHAp were observed, respectively. The reduction in BSA concentration observed in the sHAp and sHAp + TiO2 solutions is presumably due to adsorption to HAp. It is highly likely that adsorption of the acidic protein BSA occurred at the sHAp Ca2+ site. In the simulated body fluid immersion experiments, there was greater expression of hydroxyapatite (HAp) on the surface of sHAp than there was on the surface of sHAp + TiO2. In the case of TiO2 alone, no HAp was produced, even after immersion for 3 days. These results suggest a relationship between BSA adsorption and the osteoconductivity of materials.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.