Be it to aerate a glass of wine before tasting, to accelerate a chemical reaction, or to cultivate cells in suspension, the "swirling" (or orbital shaking) of a container ensures good mixing and gas exchange in an efficient and simple way. Despite being used in a large range of applications this intuitive motion is far from being understood and presents a richness of patterns and behaviors which has not yet been reported. The present research charts the evolution of the waves with the operating parameters identifying a large variety of patterns, ranging from single and multiple crested waves to breaking waves. Free surface and velocity fields measurements are compared to a potential sloshing model, highlighting the existence of various flow regimes. Our research assesses the importance of the modal response of the shaken liquids, laying the foundations for a rigorous mixing optimization of the orbital agitation in its applications. C 2014 AIP Publishing LLC. [http://dx
of a specific tip clearance for which the vortex strength is maximum and most prone to generating cavitation. List of symbols c Hydrofoil chord h Maximum foil thickness W ∞ Inlet velocity p ∞ Inlet pressure x, y, z Cartesian coordinates u, v, w Spanwise, transverse and axial velocity x c , y c Vortex center coordinates r c Vortex core radius Re c Reynolds number (W ∞ c/ν) α Incidence angle τ Normalized tip clearance (gap/h) ω Vorticity Γ Circulation Γ * Normalized circulation (
In hydraulic turbines, the tip-leakage vortex is responsible for flow instabilities and for promoting erosion due to cavitation. To better understand the tip vortex flow, Reynoldsaveraged Navier-Stokes (RANS) and large eddy simulation (LES) computations are carried out to simulate the flow around a NACA0009 blade including the gap between the tip and the wall. The main focus of the study is to understand the influence of the gap width on the development of the tip vortex, as for instance its trajectory. The RANS computations are performed using the open source solver OpenFOAM 2.1.0, two incidences and five gaps are considered. The LESs are achieved using the YALES2 solver for one incidence and two gaps.The validation of the results is performed by comparisons with experimental data available downstream the trailing edge. The position of the vortex core, the mean velocity and the mean axial vorticity fields are compared at three different downstream locations. The results show that the mean behaviour of the tip vortex is well captured by the RANS and LES computations compared to the experiment. The LES results are also analysed to bring out the influence of the gap width on the development of the tip-leakage vortex. Finally, a law that matches the vortex trajectory from the leading edge to the mid-chord is proposed. Such a law can be helpful to determine, in case of cavitation, if the tip vortex will interact with the walls and cause erosion.
Hydraulic machines play an increasingly important role in providing a secondary energy reserve for the integration of renewable energy sources in the existing power grid. This requires a significant extension of their usual operating range, involving the presence of cavitating flow regimes in the draft tube. At overload conditions, the self-sustained oscillation of a large cavity at the runner outlet, called vortex rope, generates violent periodic pressure pulsations. In an effort to better understand the nature of this unstable behavior and its interaction with the surrounding hydraulic and mechanical system, the flow leaving the runner is investigated by means of particle image velocimetry. The measurements are performed in the draft tube cone of a reduced scale model of a Francis turbine. A cost-effective method for the in-house production of fluorescent seeding material is developed and described, based on off-the-shelf polyamide particles and Rhodamine B dye. Velocity profiles are obtained at three streamwise positions in the draft tube cone, and the corresponding discharge variation in presence of the vortex rope is calculated. The results suggest that 5-10 % of the discharge in the draft tube cone is passing inside the vortex rope.
a b s t r a c tFlow induced vibration on a hydrofoil may be significantly reduced with a slight modification of the trailing edge without alteration of the hydrodynamic performance. Particularly, the so called Donaldson trailing edge shape gave remarkable results and is being used in a variety of industrial applications. Nevertheless, the physics behind vibration reduction is still not understood. In the present study, we have investigated the hydrodynamic damping of a 2D hydrofoil with Donaldson trailing edge shape. The results are compared with the same hydrofoil with blunt trailing edge. The tests are carried out in EPFL high speed cavitation tunnel and two piezoelectric patches are used for the hydrofoil excitation in non-intrusive way. It was found that the hydrodynamic damping is significantly increased with the Donaldson cut. Besides, as the flow velocity is increased, the hydrodynamic damping is found to remain almost constant up to the hydrofoil resonance and then increases linearly, for both tested trailing edge shapes and for both first bending and torsion modes.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.