DIII-D physics research addresses critical challenges for the operation of ITER and the next generation of fusion energy devices. This is done through a focus on innovations to provide solutions for high performance long pulse operation, coupled with fundamental plasma physics understanding and model validation, to drive scenario development by integrating high performance core and boundary plasmas. Substantial increases in off-axis current drive efficiency from an innovative top launch system for EC power, and in pressure broadening for Alfven eigenmode control from a co-/counter-I p steerable off-axis neutral beam, all improve the prospects for optimization of future long pulse/steady state high performance tokamak operation. Fundamental studies into the modes that drive the evolution of the pedestal pressure profile and electron vs ion heat flux validate predictive models of pedestal recovery after ELMs. Understanding the physics mechanisms of ELM control and density pumpout by 3D magnetic perturbation fields leads to confident predictions for ITER and future devices. Validated modeling of high-Z shattered pellet injection for disruption mitigation, runaway electron dissipation, and techniques for disruption prediction and avoidance including machine learning, give confidence in handling disruptivity for future devices. For the non-nuclear phase of ITER, two actuators are identified to lower the L–H threshold power in hydrogen plasmas. With this physics understanding and suite of capabilities, a high poloidal beta optimized-core scenario with an internal transport barrier that projects nearly to Q = 10 in ITER at ∼8 MA was coupled to a detached divertor, and a near super H-mode optimized-pedestal scenario with co-I p beam injection was coupled to a radiative divertor. The hybrid core scenario was achieved directly, without the need for anomalous current diffusion, using off-axis current drive actuators. Also, a controller to assess proximity to stability limits and regulate β N in the ITER baseline scenario, based on plasma response to probing 3D fields, was demonstrated. Finally, innovative tokamak operation using a negative triangularity shape showed many attractive features for future pilot plant operation.

JT-60SA, the largest tokamak that will operate before ITER, has been designed and built jointly by Japan and Europe, and is due to start operation in 2020. Its main missions are to support ITER exploitation and to contribute to the demonstration fusion reactor machine and scenario design. Peculiar properties of JT-60SA are its capability to produce long-pulse, high-β, and highly shaped plasmas. The preparation of the JT-60SA Research Plan, plasma scenarios, and exploitation are producing physics results that are not only relevant to future JT-60SA experiments, but often constitute original contributions to plasma physics and fusion research. Results of this kind are presented in this paper, in particular in the areas of fast ion physics, highbeta plasma properties and control, and non-linear edge localised mode stability studies.

In this paper we present a coupled Finite Element Method -Boundary Element Method (FEM-BEM) approach for the solution of the free-boundary axi-symmetric plasma equilibrium problem. The proposed method, obtained from an improvement of the Hagenow-Lackner coupling method, allows to efficiently model the equilibrium problem in unbounded domains by discretizing only the plasma region; the external conductors can be modelled either as 2D or 3D models, according to the problem of interest. The paper explores different iterative methods for the solution of the nonlinear Grad-Shafranov equation, such as Picard, Newton-Raphson and Newton-Krylov, in order to provide a robust and reliable tool, able to handle large-scale problems (e.g. high resolution equilibria). This method has been implemented in the FRIDA code (FReeboundary Integro-Differential Axisimmetric -ØØÔ× »» Ø Ù ºÓÑ»Ñ ØØ Ó ÓÒÓØØÓ» ÊÁ ), together with a suitable Adaptive Integration Technique (AIT) for the computation of the source term. FRIDA has been successfully tested and validated against experimental data from RFX-mod device, and numerical equilibria of an ITER-like device.

A large superconducting machine, JT-60SA has been constructed to provide major contributions to the ITER program and DEMO design. For the success of the ITER project and fusion reactor, understanding and development of plasma controllability in ITER and DEMO relevant higher beta regimes are essential. JT-60SA has focused the program on the plasma controllability for scenario development and risk mitigation in ITER as well as on investigating DEMO relevant regimes. This paper summarizes the high research priorities and strategy for the JT-60SA project. Recent works on simulation studies to prepare the plasma physics and control experiments are presented, such as plasma breakdown and equilibrium controls, hybrid and steady-state scenario development, and risk mitigation techniques. Contributions of JT-60SA to ITER and DEMO have been clarified through those studies.

No abstract