Fiber-chip edge couplers are extensively used in integrated optics for coupling of light between planar waveguide circuits and optical fibers. In this work, we report on a new fiber-chip edge coupler concept with large mode size for silicon photonic wire waveguides. The coupler allows direct coupling with conventional cleaved optical fibers with large mode size while circumventing the need for lensed fibers. The coupler is designed for 220 nm silicon-on-insulator (SOI) platform. It exhibits an overall coupling efficiency exceeding 90%, as independently confirmed by 3D Finite-Difference Time-Domain (FDTD) and fully vectorial 3D Eigenmode Expansion (EME) calculations. We present two specific coupler designs, namely for a high numerical aperture single mode optical fiber with 6 µm mode field diameter (MFD) and a standard SMF-28 fiber with 10.4 µm MFD. An important advantage of our coupler concept is the ability to expand the mode at the chip edge without leading to high substrate leakage losses through buried oxide (BOX), which in our design is set to 3 µm. This remarkable feature is achieved by implementing in the SiO upper cladding thin high-index SiN layers. The SiN layers increase the effective refractive index of the upper cladding near the facet. The index is controlled along the taper by subwavelength refractive index engineering to facilitate adiabatic mode transformation to the silicon wire waveguide while the Si-wire waveguide is inversely tapered along the coupler. The mode overlap optimization at the chip facet is carried out with a full vectorial mode solver. The mode transformation along the coupler is studied using 3D-FDTD simulations and with fully-vectorial 3D-EME calculations. The couplers are optimized for operating with transverse electric (TE) polarization and the operating wavelength is centered at 1.55 µm.
Fiber-chip edge couplers are extensively used in integrated optics as one of the key structures for coupling of light between planar waveguide circuits and optical fibers. In this work, a new fiber-chip edge coupler concept with large mode size for coupling to submicrometer silicon photonic wire waveguides is presented. The coupler allows direct coupling to conventional SMF-28 optical fiber and circumvents the need for lensed fibers. We demonstrate by simulations a 95% mode overlap between the mode at the chip facet and a high numerical aperture single mode optical fiber with 6 µm mode field diameter (MFD). We also demonstrate a modified design with 89% overlap between the mode at the chip facet and a standard SMF-28 fiber with 10.4 µm MFD. The coupler is designed for 220 nm silicon-oninsulator (SOI) platform. An important advantage of our coupler is that large mode size is obtained without the need to increase buried oxide (BOX) thickness, which in our design is set to 3 µm. This remarkable feature is achieved by implementing in the SiO 2 upper cladding two thin high-index Si 3 N 4 layers. The high-index layers increase the effective refractive index of the upper cladding layer near the facet and are gradually tapered out along the coupler to provide adiabatic mode transformation to the silicon wire waveguide. Simultaneously, the Si-wire waveguide is inversely tapered along the coupler. The mode overlap at the chip facet is studied using a vectorial 2D mode solver and the mode transformation along the coupler is studied by 3D Finite-Difference Time-Domain simulations. The couplers are optimized for operating with transverse electric (TE) polarization and the operating wavelength is centered at 1.55 µm.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.