Motor DC merupakan sistem penggerak yang paling banyak digunakan di bidang industri, otomasi, robotika, ataupun lainnya. Penggunaan sistem kendali banyak diterapkan untuk pengaturan pergerakan kecepatan ataupun posisi dari motor DC. Pada penelitian ini, state feedback controller dan penambahan kendali integral dengan estimator digunakan untuk mengendalikan posisi motor DC. Sistem dibuat berbasis real-time operarting system (RTOS) untuk pembacaan sensor, perhitungan matematis kendali, dan pengiriman sinyal pulse width modulation (PWM). Pengendalian dilakukan pada motor DC Quanser yang terhubung dengan Arduino Mega 2560 untuk membaca sensor encoder dan menampilkan data pengujian. Hasil pengujian menunjukkan bahwa state feedback controller dapat mengendalikan posisi motor DC dengan nilai penguat K sebesar 2,66 dan 115,37, nilai penguat N_bar sebesar 0,49 dan nilai estimator sebesar 7,75 dan 0,26. Penggunaan RTOS sebagai inti pemrograman dapat menyelesaikan permasalahan dalam pengerjaan task-task seperti pembacaan sensor, perhitungan parameter kendali, dan pengiriman sinyal kendali tanpa terjadi error selama pengujian sistem. Hasil analisa menunjukan keluaran sistem kendali posisi memiliki nilai overshoot sebesar 2,63% pada pengujian pertama dan 2,66% pada pengujian kedua.
The presence of robots that can assist humans with heavy or dangerous work makes the need for robots more pressing at the moment. One type of robot needed is a robot arm, which is widely used in the manufacturing industry, such as in the assembly process and pick and place. The types of robotic arms used vary both in terms of configuration and the number of degrees of freedom. However, with different types of robotic arms, different models of movement are used. Therefore, research related to the modeling of the robotic arm continues to be carried out to obtain the appropriate movement of the robotic arm. One of the methods used as a first step in designing a robotic arm movement model is kinematics analysis. Kinematics analysis aims to analyze the movement of the robot arm without knowing what force causes the movement. This paper aims to produce an ideal movement model for the AX-12A 3-DoF robotic arm using forward kinematic and inverse kinematic analysis using two methods, the Denavit-Haterberg method and the geometric approach method. The difference from other papers is that this paper makes the kinematics model using Robotic, Vision, and Control (RVC) tools based on the Peter I. Corke model on MATLAB software first before implementing it on hardware. The results show that the error percentage for the forward kinematic model is 1.04% and the inverse kinematic is 0.76%, which means the two models achieved the target that the model’s error maximum must be less than 2%.
A Quadruped robot is a type of robot that moves on four legs and has a structure like a four-legged animal. The quality of movement based on mechanics and movement patterns on quadruped robots tends to have poor movement patterns. This study investigates the best movement between trot and wave gait by comparing the speed performance, stopping distance accuracy, and the tilt of the robot body angle. To minimize the influence of the mechanical quality of the robot, this study used two robots based on the type of servo used (based on the SG90 and MG995 servos). In this study, the motion pattern based on Trot and Wave gait is realized using Inverse Kinematics and Polynomial trajectory on each leg. The verification experiment showed that the Wave gait has better in both the robot body angle and distance error. In contrast the Trot gait has better in speed.
Ball-on-plate adalah sistem pengendalian posisi bola di atas papan menggunakan dua aktuator berupa motor servo untuk menggerakkan papan bola yang bergerak pada dua sumbu. Penelitian ini berfokus pada pengendalian posisi bola menggunakan pengendali proporsional-integral-derivatif (PID) dengan membaca posisi bola menggunakan sensor visual. Pendeteksian posisi bola menggunakan algoritma filter RGB untuk membaca gerakan bola berdasarkan warna. Sensor visual memberikan keluaran nilai koordinat kartesian dua dimensi dalam X dan Y. Pengendali PID menggunakan koordinat X dan Y sebagai feedback hasil pendeteksian posisi bola, kemudian koordinat umpan balik akan dibandingkan dengan setpoint untuk menghasilkan error koordinat. Keluaran kendali PID berupa sinyal pulse width modulation (PWM) untuk mengatur gerakan kedua servo agar posisi bola berada pada koordinat setpoint. Hasil pengujian menunjukkan bahwa pengendali PID berhasil mengendalikan posisi bola dengan waktu rata-rata bola mencapai setpoint sekitar 8,85 detik. Keluaran respon kendali memiliki analisa respon transien dengan error steady state kurang dari 10%, rise time sebesar 4,74 detik untuk respon X dan 4,20 untuk respon Y, nilai overshoot sebesar 11,29% untuk respon X dan 31,95% untuk respon Y, serta nilai settling time sebesar 37 detik untuk respon X dan 37,3 detik untuk respon Y.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.