Detection of N-nitrosamines in water supplies is an environmental and public health issue because many N-nitrosamines are classified as probable human carcinogens. Some analytical methods are inadequate for detecting N-nitrosodimethylamine (NDMA) at low ng/L concentrations in water due to poor extraction efficiencies and nonselective and nondistinctive GC/MS electron ionization techniques. Development of a selective, sensitive, and affordable benchtop analytical method for eight N-nitrosamines, at relevant drinking water concentrations was the primary objective of this project. A solid-phase extraction method using Ambersorb 572 and LiChrolut EN was developed in conjunction with GC/MS ammonia positive chemical ionization (PCI). Ammonia PCI shows excellent sensitivity and selectivity for N-nitrosamines, which were quantified using both isotope dilution/surrogate standard and internal standard procedures. Method detection limits for all investigated N-nitrosamines ranged from 0.4 to 1.6 ng/L. Applying our extraction method to authentic drinking water samples with dissolved organic carbon concentrations of 9 mg/L, we were able to detect N-nitrosodimethylamine (2-180 ng/L) as well as N-nitrosopyrrolidine (2-4 ng/L) and N-nitrosomorpholine (1 ng/L), two N-nitrosamines that have not been reported in drinking water to date. With high recoveries of standards and analytes, the described internal standard method offers a valuable new approach for investigating several N-nitroso compounds at ultratrace levels in drinking water.

No abstract

The analysis of semivolatile organochlorines (polychlorinated biphenyls and chlorinated pesticides) in less polluted biomaterials requires specific strategies in controlling the blank in sample preparation. The procedure described here allows to decrease significantly the level of contamination during the clean-up step of fish oil. Solid-phase-extraction (SPE) on LiChrolut EN and normal phase HPLC in the normal- and the backflush-mode were used to reduce the amount of solvents needed and the analysis time compared to established clean-up procedures. With a certified reference material (BCR-CRM 349; Cod Liver Oil) the precision and effectiveness of the new method were validated. Recovery rates of the Internal Standards (PCB 103 and TCN) lay between 75% and 90% at the microg/kg lipid level. The quantitative analyses were carried out by high resolution gas chromatography with electron capture detector (HRGC-ECD).

No abstract