No abstract

No abstract

The production process of ceramic roof tiles requires a large consumption of natural raw material, such as clay, and energy consumption in the sintering process. Thus, the objective of this research was the development of more ecological tile for civil construction, adopting the process of geopolymerization, which does not require burning, and the use of glass polishing waste, in partial replacement of natural raw material. Prismatic specimens were made with a ratio of alkaline solution/ (metakaolin + waste) = 0.26 and variation of the curing time in 7, 28, and 60 days, and a ratio of precursors with SiO 2 /Al 2 O 3 varying in 2.5, 3.0, 3.5, and 4.0 for the evaluation of technological properties such as apparent specific mass, linear shrinkage, water absorption, and mechanical resistance to flexion, in addition to microstructural evaluations and the physical, chemical, and mineralogical characterization of the waste. The results showed that the glass waste had potential for use as a precursor in the geopolymerization process, and that the specimens with a 7 days cure and a SiO 2 /Al 2 O 3 = 4 ratio are the most recommended for the production of roof tiles for civil construction. K E Y W O R D S ceramic roof tiles, geopolymerization, glass polishing waste How to cite this article: de Azevedo ARG, Marvila MT, Rocha HA, Cruz LR, Vieira CMF. Use of glass polishing waste in the development of ecological ceramic roof tiles by the geopolymerization process. Int

The urbanization process contributes to the growth of solid waste generation and causes an increase in environmental impacts and failures in the management of solid waste. The number of dumps is a concern due to the limited implementation and safe disposal of this waste. The interest in sustainable techniques has been growing in relation to waste management, which is largely absorbed by the civil construction sector. This work aimed to review plastic waste, especially polyethylene terephthalate (PET), that can be incorporated with construction materials, such as concrete, mortars, asphalt mixtures, and paving. The use of life-cycle assessment (LCA) is related, as a tool that allows the sustainability of products and processes to be enhanced in the long term. After analyzing the recent literature, it was identified that studies related to plastic wastes in construction materials concentrate sustainability around the alternative destination of waste. Since the plastic waste from different production chains are obtained, it was possible to affirm the need for a broader assessment, such as the LCA, providing greater quantification of data making the alternative processes and products more sustainable. The study contributes to enhance sustainability in alternative building materials through LCA.

No abstract