No abstract

Oxygen mass transfer represents the most important parameter involved in the design and operation of mixing-sparging equipment for bioreactors. It can be described and analyzed by means of the mass transfer coefficient, k(L) a. The k(L) a values are affected by many factors such as geometrical and operational characteristics of the vessels, media composition, type, concentration and microorganism morphology, and biocatalysts properties. The efficiency of oxygen transfer could be enhanced by adding oxygen-vectors in broths, such as hydrocarbons or fluorocarbons, without increasing the energy consumption for mixing or aeration. The experimental results obtained for simulated broths indicated a considerable increase of k(L) a in the presence of n-dodecane, and the existence of a certain value of n-dodecane concentration that corresponds to a maximum mass transfer rate of oxygen. The magnitude of the positive effect of n-dodecane depends both on the broths' characteristics and operational conditions of the bioreactor.

The study on mixing distribution for an aerobic stirred bioreactor and simulated (solutions of carboxymethylcellulose sodium salt), yeasts (S. cerevisiae) and fungus (P. chrysogenum pellets and free mycelia) broths indicated the significant variation of mixing time on the bioreactor height. The experiments suggested the possibility to reach a uniform mixing in whole bulk of the real broths for a certain value of rotation speed or biomass concentration domain. For S. cerevisiae broths the optimum rotation speed increased to 500 rpm with the biomass accumulation from 40 to 150 g/l d.w. Irrespective of their morphology, for fungus cultures the existence of optimum rotation speed (500 rpm) has been recorded only for biomass concentration below 24 g/l d.w. The influence of aeration rate depends on the apparent viscosity/biomass concentration and on the impellers and sparger positions. By increasing the apparent viscosity for simulated broths, or biomass amount for real broths, the shape of the curves describing the mixing time variation is significantly changed for all the considered positions. The intensification of the aeration induced the increase of mixing time, which reached a maximum value, decreasing then, due to the flooding phenomena. This variation became more pronounced at higher viscosities for simulated broths, at higher yeasts concentration, and at lower pellets or filamentous fungus concentration, respectively. By means of the experimental data and using MATLAB software, some mathematical correlations for mixing time have been proposed for each broth and considered position inside the bioreactor. These equations offer a good agreement with the experiment, the maximum deviation being +/-7.3% for S. cerevisiae broths.

No abstract

No abstract

The previous works on simulated broths are continued and developed for Propionibacterium shermanii broths. The obtained results indicated the considerable increase of kLa in presence of n-dodecane as oxygen-vector and the existence of a certain value of hydrocarbon concentration that corresponds to the maximum mass transfer rate of oxygen. The magnitude of the positive effect of the oxygen-vector strongly depends on operational conditions of the bioreactor, on broth characteristics and on P. shermanii concentration.

This paper is dedicated to the study on external and internal mass transfers of glucose for succinic fermentation under substrate and product inhibitions using a bioreactor with a stationary basket bed of immobilized Actinobacillus succinogenes cells. By means of the substrate mass balance for a single particle of biocatalysts, considering the Jerusalimsky kinetic model including both inhibitory effects, specific mathematical expressions have been developed for describing the profiles of the substrate concentrations and mass flows in the outer and inner regions of biocatalyst particles, as well as for estimating the influence of internal diffusion on glucose consumption rate. The results indicated that very low values of internal mass flow could be reached in the particles center. The corresponding region was considered biologically inactive, with its extent varying from 0.24% to 44% from the overall volume of each biocatalyst. By immobilization of bacterial cells and use of a basket bed, the rate of glucose consumption is reduced up to 200 times compared with the succinic fermentation system containing free cells.

The direct reactive extraction of propionic acid from Propionibacterium acidipropionici broths with solutions of tri‐n‐octylamine in dichloromethane, n‐butyl acetate or n‐heptane underlined the strong negative influence of the cells, due to the blockage of the interface by their adsorption. The magnitude of this effect <#>depends on the affinity of the cells for the organic phase, which is more important for n‐heptane, but only at biomass concentrations below 18 g L–1 d.w. (dry weight). Moreover, the interfacial mass transfer of the acid is also controlled by the solvent polarity, and is accelerated from n‐heptane to dichloromethane and by the addition to the organic phase of 1‐octanol as a phase modifier. The influences of the biomass concentration, the rotation speed and the solvent dielectric constant were included in a mathematical model describing the solute mass flow from the aqueous to the organic phase.